Vintage Sewing Machine Shop.....Come on in and sit a spell
11-07-2011, 10:27 AM
Super Member
Join Date: Sep 2010
Posts: 4,972
Originally Posted by miriam
There are some easy quilts that don't require so many little pieces at a time. She is trying to keep a heart pattern going.
Justtrish, Start using that FW now! Forget about trying to learn the feet at this point in time and just start using your machines. Most likely the foot that is on the machine is the foot that you need to use for piecing. Have Fun!
11-07-2011, 10:30 AM
Senior Member
Join Date: Aug 2011
Location: Ft. Myers, Fl
Posts: 582
Originally Posted by miriam
OH you have a clone!!! You want to get the needle in the right direction - ask Glen how I know..... http://blog.sew-classic.com/2008/12/...-15-clone.aspx The
re is even a manual on there! More clones: http://www.quiltingboard.com/picture...p-t164361.html
re is even a manual on there! More clones: http://www.quiltingboard.com/picture...p-t164361.html
I knew it was a clone, and such a pretty little miss, lol. It just took me a while to come out of my funk and take a real look at her. She is all nice and clean and oiled up. And now I know how to put the needle in and thread her up. I might actually get that quilt under a machine and repaired yet, lol. It does have the little Precision Badge on it, too. Now, I need to go work on my little black one, and see if I can get it running. I might even sneak in some sewing. Someone should have warned me about these machines.
11-07-2011, 10:31 AM
Super Member
Join Date: Sep 2010
Posts: 4,972
Originally Posted by Weedwoman
I also keep all the attachments, bobbins, etc that go with each machine in a container right with each machine. I also like to have a pair of small scissors/snips, a small ruler guide and anything else I think I might need (manual, oil). And I made little fabric bowls for each machine, they are great to catch all the little snips of thread and things because I don't have a trash container at each machine. The little bowls are cute made of sewing related fabrics or any other you like.
11-07-2011, 10:32 AM
Super Member
Join Date: Aug 2010
Location: Kentucky - Live in Iowa
Posts: 1,168
Thank You, Billy - I hope this means that you are feeling better! You can count me in!
11-07-2011, 10:42 AM
Super Member
Join Date: Nov 2010
Location: Calif (San Joaquin Valley)
Posts: 3,482
Been browsing Shopgoodwill.com & Ebay for 15 clones. Any thoughts on this one? Bidding closes in 6 hours (5:00-ish PST)http://www.ebay.com/itm/Excellent-Po...item415ee727d2
11-07-2011, 10:44 AM
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Originally Posted by QuiltnCowgirl
Been browsing Shopgoodwill.com & Ebay for 15 clones. Any thoughts on this one? http://www.ebay.com/itm/Excellent-Po...item415ee727d2
11-07-2011, 10:45 AM
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Originally Posted by justtrish
Miriam,
She does explain it well. However, when reading the info on the attachment numbers on the uksinger site... some are described as "standard foot"
What is a standard foot???
She does explain it well. However, when reading the info on the attachment numbers on the uksinger site... some are described as "standard foot"
What is a standard foot???
11-07-2011, 10:47 AM
Senior Member
Join Date: Jul 2011
Location: North TX
Posts: 764
Threading for White FR machines
Okay, I didn't think it was really that intuitive and the manual wasn't that easy for me to understand, but I figured it out. I used some yarn so the points would be more visible (It didn't fit, but I hope you get the idea).
1. Bring the thread from the spool to the guide at the top. There were several types. The small disks may be flat or upright, or it may just be a guide without the disks.
2. Bring the thread down to the slot at the bottom of the tension mechanism. It may look solid, but there is a cut or slot to bring the thread up into. Pull this up.
3. It should now hook through the small hook end of the spring that is visible. It is like a small wire.
4. Now, pull the thread up to the arm. You don't "thread" it, you slide the thread into it through the slot.
5. Take your thread down to your needle. On one of my machines, it has a little dent at the bottom to help guide the thread. Another has nothing. From here, it's just like any other, pull thread through the guide on the needle. Needle threads left to right.
Hope this helps!
[ATTACH=CONFIG]283396[/ATTACH]
1. Bring the thread from the spool to the guide at the top. There were several types. The small disks may be flat or upright, or it may just be a guide without the disks.
2. Bring the thread down to the slot at the bottom of the tension mechanism. It may look solid, but there is a cut or slot to bring the thread up into. Pull this up.
3. It should now hook through the small hook end of the spring that is visible. It is like a small wire.
4. Now, pull the thread up to the arm. You don't "thread" it, you slide the thread into it through the slot.
5. Take your thread down to your needle. On one of my machines, it has a little dent at the bottom to help guide the thread. Another has nothing. From here, it's just like any other, pull thread through the guide on the needle. Needle threads left to right.
Hope this helps!
[ATTACH=CONFIG]283396[/ATTACH]
Last edited by Bennett; 11-07-2011 at 10:47 AM. Reason: forgot picture
11-07-2011, 10:52 AM
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Originally Posted by Bennett
Okay, I didn't think it was really that intuitive and the manual wasn't that easy for me to understand, but I figured it out. I used some yarn so the points would be more visible (It didn't fit, but I hope you get the idea).
1. Bring the thread from the spool to the guide at the top. There were several types. The small disks may be flat or upright, or it may just be a guide without the disks.
2. Bring the thread down to the slot at the bottom of the tension mechanism. It may look solid, but there is a cut or slot to bring the thread up into. Pull this up.
3. It should now hook through the small hook end of the spring that is visible. It is like a small wire.
4. Now, pull the thread up to the arm. You don't "thread" it, you slide the thread into it through the slot.
5. Take your thread down to your needle. On one of my machines, it has a little dent at the bottom to help guide the thread. Another has nothing. From here, it's just like any other, pull thread through the guide on the needle. Needle threads left to right.
Hope this helps!
[ATTACH=CONFIG]283396[/ATTACH]
1. Bring the thread from the spool to the guide at the top. There were several types. The small disks may be flat or upright, or it may just be a guide without the disks.
2. Bring the thread down to the slot at the bottom of the tension mechanism. It may look solid, but there is a cut or slot to bring the thread up into. Pull this up.
3. It should now hook through the small hook end of the spring that is visible. It is like a small wire.
4. Now, pull the thread up to the arm. You don't "thread" it, you slide the thread into it through the slot.
5. Take your thread down to your needle. On one of my machines, it has a little dent at the bottom to help guide the thread. Another has nothing. From here, it's just like any other, pull thread through the guide on the needle. Needle threads left to right.
Hope this helps!
[ATTACH=CONFIG]283396[/ATTACH]
11-07-2011, 10:57 AM
Senior Member
Join Date: Jul 2011
Location: North TX
Posts: 764
Originally Posted by miriam
What a fancy lady!!! Does it sew like that??? I guess that's what counts.
That's the one I cleaned that came in the Mission style cabinet (which I have yet to get started on). The decals aren't bad. She makes good stitches. I really wish I had a way to switch out the wheels on this one and Cookie. The embossed one would look great in the treadle! Just can't figure out how in the world to remove either one!
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM
