Vintage Sewing Machine Shop.....Come on in and sit a spell
11-26-2011, 08:59 AM
Super Member
Join Date: May 2010
Location: Lexington, KY
Posts: 1,222
I made mine with the plastic strapping I cut off a box shipped to me. It's probably about 3/8" wide or so.
Originally Posted by Weedwoman
I couldn't find anything that was recommended for the project (boning or the heavy strapping used for shipping) so I raided my cupboard and found an empty margerine container and cut strips, stitched them end to end on Elaine and covered the strip with batting and it worked great. Pretty cheap way to go. I live in a very small town with basically zero shopping options so you make do but I kind of like putting the old brain to work like that.
11-26-2011, 09:00 AM
Super Member
Join Date: Aug 2011
Location: Millville, NJ
Posts: 1,835
Originally Posted by misseva
Now if I could just figure out how to put the belt on. Anyone out there know where I could get picture instructions?
---Get proper size belt in natural leather (stay away from red) from SM supply, ebay or.....
---wrap belt around treadle pulley and SM pulley and pull tight and cut where ends meet (don't worry about cutting short the belt will stretch)
---examine wire staple that comes with belt, get drill bit slightly bigger than staple diameter and drill hole in each end of belt half the width of staple (so holes are width of staple when belt is put together)
---Put staple thru one end of belt and crimp tight on other end leave alone.
---Put belt on machine with uncrimped staple end facing up and run treadle for a few minutes
---Belt will stretch and cut off belt at hole at uncrimped end and drill another hole half width of staple
---might have to do this 2-3 times till belt is broken in
---crimp second end when belt seems stable and belt doesn't slip but not overly tight
---imagine Youtube and google would also have info on this.
Good Luck, it sort of a fun process
Jon
---
11-26-2011, 09:43 AM
Super Member
Join Date: May 2010
Location: Lexington, KY
Posts: 1,222
Phoenix Sewing Machine
Originally Posted by jlhmnj
Found this image with a beautiful handmade treadle cabinet:
http://tidytipsy.wordpress.com/2010/...part-1-oiling/
Also some older machines similar to a Singer 27 Vibrating shuttle and a 50's ZZ machine. Few images on google search "phoenix sewing machine german", but not alot. Good luck, I'm sure it's a well made machine but couldn't pinpoint who made the older versions.
Jon
http://tidytipsy.wordpress.com/2010/...part-1-oiling/
Also some older machines similar to a Singer 27 Vibrating shuttle and a 50's ZZ machine. Few images on google search "phoenix sewing machine german", but not alot. Good luck, I'm sure it's a well made machine but couldn't pinpoint who made the older versions.
Jon
Baer & Rempel manufactured the newer Phoenix machines, but not sure if they made the treadles or not--I will ask a friend who knows more about them than I do.
There's an overpriced one on Ebay right now: http://www.ebay.com/itm/PHOENIX-TREA...09541593802939
Johnny
11-26-2011, 09:57 AM
Super Member
Join Date: Dec 2009
Location: leavenworth, ks
Posts: 3,093
Originally Posted by missgigglewings
Good Morning everybody! Hope your Thanksgiving was a good one!
I just bought a 1970 Singer Touch and Sew for $5.00. I cleaned it up and plugged it in and she ran, A little clackity until I oiled her and let her set awhile. Now she sounds so purty and peaceful. Poor thing is missing some of her parts and I can't find what I need on e-bay or the Sibger co site. Anyone out there got any cams you want to sell or a cover plate and a straight stitch plate? I may spend a little money on this machine because I really like how she sounds and there is an on/ff/slow/fast button! I love it!! I also need a bobbin or two!
I just bought a 1970 Singer Touch and Sew for $5.00. I cleaned it up and plugged it in and she ran, A little clackity until I oiled her and let her set awhile. Now she sounds so purty and peaceful. Poor thing is missing some of her parts and I can't find what I need on e-bay or the Sibger co site. Anyone out there got any cams you want to sell or a cover plate and a straight stitch plate? I may spend a little money on this machine because I really like how she sounds and there is an on/ff/slow/fast button! I love it!! I also need a bobbin or two!
11-26-2011, 10:04 AM
Super Member
Join Date: May 2010
Location: Lexington, KY
Posts: 1,222
Miriam, the hand crank assembly won't work on the 206/306/319 machines unless you drill new holes. The motor mount hole is not in the same position as other old Singers.
Originally Posted by miriam
I'm watching your Singer 319 stitch issues conversation with great interest. I still have more to do to get mine to work. I've been really busy on other things and other machines lately. Yesterday I got a lot done so I'm down to just a couple machines. Mr. Ed (319) has gone back up to the top of the repair line! I have needles now but I forgot to order a belt. I have a hand crank so I may test that out on it. I'm pretty sure I'm going to be sitting there with the manual in one hand trying to figure out the bite thing since I turned it. I found another 319 on CL but they don't have contact info and don't answer emails. Maybe it is sold and they haven't taken it down.
11-26-2011, 10:35 AM
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Originally Posted by Miz Johnny
Miriam, the hand crank assembly won't work on the 206/306/319 machines unless you drill new holes. The motor mount hole is not in the same position as other old Singers.
11-26-2011, 11:29 AM
Senior Member
Join Date: Jun 2010
Location: SE Kansas
Posts: 393
Charlee, I painted one of my cabinets bright red because it's the first one I got and I wanted it in my Mickey Mouse room. It houses a Sewmor machine and looks really cute in with all my MM stuff. I painted an old straight back chair all black put a red cushion on the seat and MM decals on the back of the chair. So, I'd say feel free to get creative and do what you need to do to your cabinet. That's part of the fun.
11-26-2011, 11:39 AM
Senior Member
Join Date: Aug 2010
Location: Albuquerque NM
Posts: 674
Belts
About 20 years ago I bought “new” leathers for my 104 and 114 machines and the leather was old I guess. They kept breaking, and I hate the replacing the clips. I went to my air condition/ plumbing supply and bought regular fan belts from them. I have never a problem since.
I called all over town and found one long and thin enough to fit my 29-4 but I had to cut it to get it on the machine. That was not easy to clip together
About 20 years ago I bought “new” leathers for my 104 and 114 machines and the leather was old I guess. They kept breaking, and I hate the replacing the clips. I went to my air condition/ plumbing supply and bought regular fan belts from them. I have never a problem since.
I called all over town and found one long and thin enough to fit my 29-4 but I had to cut it to get it on the machine. That was not easy to clip together
11-26-2011, 02:21 PM
Senior Member
Join Date: Feb 2011
Location: Victorian Sweatshop
Posts: 863
Hey beanie, its not a wheel. Its a device for winding spun yarn into hanks. I don't know what they are called but the hand version is a niddy-noddy. Niddy noddy, niddy noddy, two heads, one body. How cool to see one.
11-26-2011, 02:26 PM
Super Member
Join Date: Jan 2011
Location: Sierra Vista, AZ
Posts: 3,992
New to the collection our Singer Sphinx
My DD's mission for this morning was to go look and perhaps buy a Sphinx. Success. She is a beautiful girl under all of that old hardened oil. We are so happy. She comes into the house tonight for cleaning and oiling (currently in the garage in hiding. DH does not understand our passion). Her serial number is K311054, born in 1902 we think. We will be calling Singer on Monday to get actual birth date. 
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM
