Vintage Sewing Machine Shop.....Come on in and sit a spell
02-19-2012, 06:22 AM
Super Member
Join Date: Apr 2010
Location: Rescue, California
Posts: 4,585
Originally Posted by vintagemotif
Nancy
Besides using my Davis for attaching binding, I also straight stitch quilt with her because of that wonderful walking foot. Sometimes I have noticed that the stitches have loosened; those are the times that the tension dial has moved to the loose setting. I have noticed that the vibration off of the machine has cause the tension dial to shift. This isn't caused by the treadle since treadling is smooth and quiet. I just check on the tension dial setting with the start of a new row.
Besides using my Davis for attaching binding, I also straight stitch quilt with her because of that wonderful walking foot. Sometimes I have noticed that the stitches have loosened; those are the times that the tension dial has moved to the loose setting. I have noticed that the vibration off of the machine has cause the tension dial to shift. This isn't caused by the treadle since treadling is smooth and quiet. I just check on the tension dial setting with the start of a new row.
Nancy
02-19-2012, 06:28 AM
Super Member
Join Date: Apr 2010
Location: Rescue, California
Posts: 4,585
Originally Posted by miriam
Nancy, Get a walking foot that has been modified to fit a 301 and it will do your bindings just fine - Cathy will know what you need.
Nancy
Last edited by BoJangles; 02-19-2012 at 06:31 AM.
02-19-2012, 06:41 AM
Super Member
Join Date: Apr 2010
Location: Rescue, California
Posts: 4,585
Ok, I got my new one and only 301 from Cathy yesterday! I played with her at Girls Night Out last night! She is wonderful to use, but I need to get a 1/4" foot. I am so use to using a 1/4" foot that I had a hard time keeping my seams a perfect 1/4" so I had to switch to my FW! I also did not know about the screw under the bed that lowers the feed dogs! Cathy showed me how to lower those feed dogs! Geeze, if any of you need sewing machine parts, etc., Cathy is the person to see. She has everything you could want and she is so organized! I also, picked up some attachments, feet, slide plates, bobbins, darning plate for my 319w, which really excited me! I got some needles for Kathie's new Free Westinghouse too! Thank you Cathy! I know I am going to love this new 301. It is so purrrrty, and easy to take to classes with the handle on top!
Nancy
Nancy
Last edited by BoJangles; 02-19-2012 at 06:44 AM.
02-19-2012, 07:14 AM
Super Member
Join Date: Sep 2009
Location: Idaho
Posts: 6,442
Originally Posted by BoJangles
Ok, I got my new one and only 301 from Cathy yesterday! I played with her at Girls Night Out last night! She is wonderful to use, but I need to get a 1/4" foot. I am so use to using a 1/4" foot that I had a hard time keeping my seams a perfect 1/4" so I had to switch to my FW! I also did not know about the screw under the bed that lowers the feed dogs! Cathy showed me how to lower those feed dogs! Geeze, if any of you need sewing machine parts, etc., Cathy is the person to see. She has everything you could want and she is so organized! I also, picked up some attachments, feet, slide plates, bobbins, darning plate for my 319w, which really excited me! I got some needles for Kathie's new Free Westinghouse too! Thank you Cathy! I know I am going to love this new 301. It is so purrrrty, and easy to take to classes with the handle on top!
Nancy
Nancy
02-19-2012, 07:51 AM
Super Member
Join Date: Apr 2010
Location: West Virginia
Posts: 1,049
Nancy, Congrats on getting your 301. It will be a good on to do pieces on. I love the ones I have.
02-19-2012, 08:56 AM
Super Member
Join Date: May 2010
Location: Lexington, KY
Posts: 1,222
Geez, mine is in better condition and you can have it for a lot less than that, LOL! I'm always amazed at what people think these machines are worth.
Originally Posted by Bennett
Another game of tell me what it is...found this listing while browsing CL. Looks kind of like the pics I've seen of Florence treadles, but I really have no idea what it is. I'm mostly just curious to know, and I bet someone here knows!
http://oklahomacity.craigslist.org/atq/2850172342.html
http://oklahomacity.craigslist.org/atq/2850172342.html
02-19-2012, 08:58 AM
Senior Member
Join Date: Oct 2011
Location: Pine cone and tassel state
Posts: 978
Bea, a dainty old gal (Davis VF, early 1880's)
Hi all,
I know, I know, Charlee got you all to wondering what's new in my world but I already spilled the beans in the title.
We have a local 'rag' called Uncle Henry's (UH) that is similar to Craigslist where folks buy, trade and sell. My dh's brother called yesterday to say he saw a 'White' treadle for sale in New Hampshire. Not that I need another machine but something made me hop onto the UH's website - btw, if you're not a subscriber, you only get to view some of the posts. I spied this machine. HOLY HANNAH!! I don't know much yet about A & V machines but I knew this machine doesn't come a dime a dozen (please pardon the cliche). I tried getting hold of my not-so-local mentor for her opinion and advice but imagine, she probably has a life :-) So a quick drive by the ATM for cash and we're off. The seller's asking price was $85. He was thrilled to hear I would be using her and not reselling it. The price agreed upon by the men left enough to pay our entrance into the dance last night - can you imagine?! I would have paid the $85 and split town so fast before the seller had a chance or wanted to renig.
She's a darling little thing and I can't wait to try her out. Dh found a length of belt (so I can skip the too-skinny pantyhose idea) so the only thing left to do is to get her slide plates opened and change the bobbin winder ring. We have her setting with some lub along the plate edges. If you have any suggestions, please, let me know. We have tried a dowel and rubber mallet and tapping in the finger groove but she's fairly locked in. The shuttle is in place. With the exception of the marring on the front slide plate she looks pretty darn good. Her table will need some work come spring time. The seller says there was a 'box of attachments and stuff' that is in the attic. He promised to try and locate it and call me with seven days. What a guy!
Enjoy!
And a huge 'Thank you and a hug' to my west coast friend, who wrote back 'OMG!! GO GET IT!!!!!!!!!!!
best,
d
I know, I know, Charlee got you all to wondering what's new in my world but I already spilled the beans in the title.
We have a local 'rag' called Uncle Henry's (UH) that is similar to Craigslist where folks buy, trade and sell. My dh's brother called yesterday to say he saw a 'White' treadle for sale in New Hampshire. Not that I need another machine but something made me hop onto the UH's website - btw, if you're not a subscriber, you only get to view some of the posts. I spied this machine. HOLY HANNAH!! I don't know much yet about A & V machines but I knew this machine doesn't come a dime a dozen (please pardon the cliche). I tried getting hold of my not-so-local mentor for her opinion and advice but imagine, she probably has a life :-) So a quick drive by the ATM for cash and we're off. The seller's asking price was $85. He was thrilled to hear I would be using her and not reselling it. The price agreed upon by the men left enough to pay our entrance into the dance last night - can you imagine?! I would have paid the $85 and split town so fast before the seller had a chance or wanted to renig.
She's a darling little thing and I can't wait to try her out. Dh found a length of belt (so I can skip the too-skinny pantyhose idea) so the only thing left to do is to get her slide plates opened and change the bobbin winder ring. We have her setting with some lub along the plate edges. If you have any suggestions, please, let me know. We have tried a dowel and rubber mallet and tapping in the finger groove but she's fairly locked in. The shuttle is in place. With the exception of the marring on the front slide plate she looks pretty darn good. Her table will need some work come spring time. The seller says there was a 'box of attachments and stuff' that is in the attic. He promised to try and locate it and call me with seven days. What a guy!
Enjoy!
And a huge 'Thank you and a hug' to my west coast friend, who wrote back 'OMG!! GO GET IT!!!!!!!!!!!
best,
d
02-19-2012, 08:58 AM
Super Member
Join Date: May 2010
Location: Lexington, KY
Posts: 1,222
Geeze!! Mine is in a lot better condition and you can have it for a lot less! I'm always amazed at what people think their junk is worth.
Originally Posted by Bennett
Another game of tell me what it is...found this listing while browsing CL. Looks kind of like the pics I've seen of Florence treadles, but I really have no idea what it is. I'm mostly just curious to know, and I bet someone here knows!
http://oklahomacity.craigslist.org/atq/2850172342.html
http://oklahomacity.craigslist.org/atq/2850172342.html
02-19-2012, 09:10 AM
Super Member
Join Date: May 2010
Location: Lexington, KY
Posts: 1,222
Wow--beautiful old machine in great condition. Is there any chance of a close up on that bed decal??
Originally Posted by Whigrose
Hi all,
I know, I know, Charlee got you all to wondering what's new in my world but I already spilled the beans in the title.
And a huge 'Thank you and a hug' to my west coast friend, who wrote back 'OMG!! GO GET IT!!!!!!!!!!!
best,
d
I know, I know, Charlee got you all to wondering what's new in my world but I already spilled the beans in the title.
And a huge 'Thank you and a hug' to my west coast friend, who wrote back 'OMG!! GO GET IT!!!!!!!!!!!
best,
d
02-19-2012, 09:12 AM
Senior Member
Join Date: Jul 2011
Location: Northern California
Posts: 330
Originally Posted by Whigrose
Hi all,
I know, I know, Charlee got you all to wondering what's new in my world but I already spilled the beans in the title.
We have a local 'rag' called Uncle Henry's (UH) that is similar to Craigslist where folks buy, trade and sell. My dh's brother called yesterday to say he saw a 'White' treadle for sale in New Hampshire. Not that I need another machine but something made me hop onto the UH's website - btw, if you're not a subscriber, you only get to view some of the posts. I spied this machine. HOLY HANNAH!! I don't know much yet about A & V machines but I knew this machine doesn't come a dime a dozen (please pardon the cliche). I tried getting hold of my not-so-local mentor for her opinion and advice but imagine, she probably has a life :-) So a quick drive by the ATM for cash and we're off. The seller's asking price was $85. He was thrilled to hear I would be using her and not reselling it. The price agreed upon by the men left enough to pay our entrance into the dance last night - can you imagine?! I would have paid the $85 and split town so fast before the seller had a chance or wanted to renig.
She's a darling little thing and I can't wait to try her out. Dh found a length of belt (so I can skip the too-skinny pantyhose idea) so the only thing left to do is to get her slide plates opened and change the bobbin winder ring. We have her setting with some lub along the plate edges. If you have any suggestions, please, let me know. We have tried a dowel and rubber mallet and tapping in the finger groove but she's fairly locked in. The shuttle is in place. With the exception of the marring on the front slide plate she looks pretty darn good. Her table will need some work come spring time. The seller says there was a 'box of attachments and stuff' that is in the attic. He promised to try and locate it and call me with seven days. What a guy!
Enjoy!
And a huge 'Thank you and a hug' to my west coast friend, who wrote back 'OMG!! GO GET IT!!!!!!!!!!!
best,
d
I know, I know, Charlee got you all to wondering what's new in my world but I already spilled the beans in the title.
We have a local 'rag' called Uncle Henry's (UH) that is similar to Craigslist where folks buy, trade and sell. My dh's brother called yesterday to say he saw a 'White' treadle for sale in New Hampshire. Not that I need another machine but something made me hop onto the UH's website - btw, if you're not a subscriber, you only get to view some of the posts. I spied this machine. HOLY HANNAH!! I don't know much yet about A & V machines but I knew this machine doesn't come a dime a dozen (please pardon the cliche). I tried getting hold of my not-so-local mentor for her opinion and advice but imagine, she probably has a life :-) So a quick drive by the ATM for cash and we're off. The seller's asking price was $85. He was thrilled to hear I would be using her and not reselling it. The price agreed upon by the men left enough to pay our entrance into the dance last night - can you imagine?! I would have paid the $85 and split town so fast before the seller had a chance or wanted to renig.
She's a darling little thing and I can't wait to try her out. Dh found a length of belt (so I can skip the too-skinny pantyhose idea) so the only thing left to do is to get her slide plates opened and change the bobbin winder ring. We have her setting with some lub along the plate edges. If you have any suggestions, please, let me know. We have tried a dowel and rubber mallet and tapping in the finger groove but she's fairly locked in. The shuttle is in place. With the exception of the marring on the front slide plate she looks pretty darn good. Her table will need some work come spring time. The seller says there was a 'box of attachments and stuff' that is in the attic. He promised to try and locate it and call me with seven days. What a guy!
Enjoy!
And a huge 'Thank you and a hug' to my west coast friend, who wrote back 'OMG!! GO GET IT!!!!!!!!!!!
best,
d
Wow, she is a beauty!! I love the treadle table!! What a find!!
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM
