Vintage Sewing Machine Shop.....Come on in and sit a spell
03-31-2012, 07:41 PM
Junior Member
Join Date: Mar 2012
Location: San francisco Bay Area
Posts: 249
Glenn- I made my own shellac- its a 2 pound cut. should I thin it to a one pound? or does it not matter. Thanks Laura
(2 pound and one pound are strengths of shellac. I don't think the rest of you have to worry about it. I've been getting a little over-involved in the wood work, again.)
(2 pound and one pound are strengths of shellac. I don't think the rest of you have to worry about it. I've been getting a little over-involved in the wood work, again.)
03-31-2012, 07:41 PM
Super Member
Join Date: Sep 2010
Posts: 4,972
Originally Posted by Charlee
Hey Monica...did you happen to notice that Skip's showin' off his "drawers" AGAIN?? 
03-31-2012, 07:45 PM
Junior Member
Join Date: Mar 2012
Location: San francisco Bay Area
Posts: 249
Folks- if you haven't tried this yet- please do. It is beyond simple. Don't scrub. Like you are putting moisturizer on your eyelid, like. I am beyond impressed what it has done to the worst looking machine I owned, and just worked over my Davis VF. The bed was so rough it was a challenge to sew with, and now it is quite smooth! Really, really fun! Now, if Glen could just tell us how to do this to our own wrinkles, instead of just our machines, he could make a million bucks! Laura
03-31-2012, 07:45 PM
Super Member
Join Date: Sep 2010
Posts: 4,972
Originally Posted by Charlee
Hey Monica...did you happen to notice that Skip's showin' off his "drawers" AGAIN??
, and I believe it is his undershirt that he is using.
03-31-2012, 07:46 PM
Super Member
Join Date: Sep 2010
Posts: 4,972
Originally Posted by nurseknitsLaura
Folks- if you haven't tried this yet- please do. It is beyond simple. Don't scrub. Like you are putting moisturizer on your eyelid, like. I am beyond impressed what it has done to the worst looking machine I owned, and just worked over my Davis VF. The bed was so rough it was a challenge to sew with, and now it is quite smooth! Really, really fun! Now, if Glen could just tell us how to do this to our own wrinkles, instead of just our machines, he could make a million bucks! Laura
03-31-2012, 08:16 PM
Super Member
Join Date: Sep 2010
Posts: 4,972
I'm sharing my raisin buns with all of you. I figured if Glenn is showing off his drawers again, I'll share my buns.
[ATTACH=CONFIG]324308[/ATTACH]
Thanks Glenn for your work that you have done so far for this tutorial.
[ATTACH=CONFIG]324308[/ATTACH]
Thanks Glenn for your work that you have done so far for this tutorial.
Last edited by vintagemotif; 03-31-2012 at 08:20 PM.
03-31-2012, 08:20 PM
Junior Member
Join Date: Mar 2012
Location: San francisco Bay Area
Posts: 249
HELLO! Recipe???
Originally Posted by vintagemotif
I'm sharing my raisin buns with all of you. I figured if Glenn is showing off his drawers, I'll share my buns.
[ATTACH=CONFIG]324308[/ATTACH]
Thanks Glenn for your work that you have done so far for this tutorial.
[ATTACH=CONFIG]324308[/ATTACH]
Thanks Glenn for your work that you have done so far for this tutorial.
03-31-2012, 08:31 PM
Super Member
Join Date: Sep 2009
Location: Idaho
Posts: 6,442
Originally Posted by vintagemotif
I'm sharing my raisin buns with all of you. I figured if Glenn is showing off his drawers again, I'll share my buns.
[ATTACH=CONFIG]324308[/ATTACH]
Thanks Glenn for your work that you have done so far for this tutorial.
[ATTACH=CONFIG]324308[/ATTACH]
Thanks Glenn for your work that you have done so far for this tutorial.
03-31-2012, 08:33 PM
Super Member
Join Date: Sep 2010
Posts: 4,972
Originally Posted by nurseknitsLaura
HELLO! Recipe???
It will be my pleasure to share this recipe. I will write up the recipe in the food section of QB.
03-31-2012, 08:34 PM
Super Member
Join Date: Apr 2010
Location: Rescue, California
Posts: 4,585
Originally Posted by vintagemotif
I'm sharing my raisin buns with all of you. I figured if Glenn is showing off his drawers again, I'll share my buns.
[ATTACH=CONFIG]324308[/ATTACH]
Thanks Glenn for your work that you have done so far for this tutorial.
[ATTACH=CONFIG]324308[/ATTACH]
Thanks Glenn for your work that you have done so far for this tutorial.
Nancy
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM
