Vintage Sewing Machine Shop.....Come on in and sit a spell
05-02-2013, 02:12 PM
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Last night Wilbur and I cleaned up a Singer 128. He was bug eyed and mouth open while we worked on it. He knows what is in sewing machine guts but that one was new. He turned the wheel and I oiled. And he exclaimed about the little boat -er - "shuttle, Wilbur" - "BOAT GRANDMA, BOAT." So today I went over it again. It has paint coming off the plate - it would be rough for sewing and some of the paint has turned green around that rough area - the bottom of the machine was fine - makes me wonder if someone used liquid wrench or something to eat the paint. Any ideas how to smooth all that up? It amazes me how well those old machines can be cleaned up and be made to work. This one turns very nice now. There was no rust on the shuttle.
05-02-2013, 07:59 PM
Member
Join Date: May 2013
Posts: 30
Hi everyone. I am new here, and new to sewing and quilting. Just tonight we went and picked up a treadle sewing machine my mom inherited before I was born, but never received until now. I believe it to be a Richmond. I can post pictures tommorow, can't take them tonight. I was wondering if anyone knew what years of was made, how to clean it up without taking it out of the cabinet, and hope to thread it. Again I will post pictures tomorrow.
05-03-2013, 04:28 AM
Senior Member
Join Date: Mar 2012
Location: Brookfield, IL
Posts: 862
Originally Posted by miriam
Last night Wilbur and I cleaned up a Singer 128. He was bug eyed and mouth open while we worked on it. He knows what is in sewing machine guts but that one was new. He turned the wheel and I oiled. And he exclaimed about the little boat -er - "shuttle, Wilbur" - "BOAT GRANDMA, BOAT." So today I went over it again. It has paint coming off the plate - it would be rough for sewing and some of the paint has turned green around that rough area - the bottom of the machine was fine - makes me wonder if someone used liquid wrench or something to eat the paint. Any ideas how to smooth all that up? It amazes me how well those old machines can be cleaned up and be made to work. This one turns very nice now. There was no rust on the shuttle.
~G~
05-03-2013, 05:42 AM
Super Member
Join Date: Apr 2010
Location: Rescue, California
Posts: 4,585
Originally Posted by quiltdoctor
Hello everyone !! We did have a lot of fun and Skip and Pat are so nice!!! Skip got one of my Wheeler Wilson 8 machines up and running and my 1891 New Home sewing too. I picked his brain on what to do with each cabinet to get the best restoration and he fixed my Damascus parlor cabinet that had a problem with the bottom that cracked. Then he patched the foot treadle plate on my Wheeler Wilson 9 that is in the middle of being redone. My 1879 White VS 1 gave him fits until I realized I had written the wrong needle size down. I didn't have the correct one. Then we looked at his beautiful "fishy quilt" and some I had made and a few antique ones too. We were busy for those 2 days. I thank them so much for coming. I will still get my Davis Vertical feed from Jennb in the near future, but we just couldn't get everything done.
I am doing well, six months after my husbands death. It is quite an adjustment and seems I don't fine my way here as often as I should. I think about you all and will try to do better.
Texas Jan
I am doing well, six months after my husbands death. It is quite an adjustment and seems I don't fine my way here as often as I should. I think about you all and will try to do better.
Texas Jan
Nancy
05-03-2013, 05:45 AM
Senior Member
Join Date: Jan 2013
Posts: 524
Originally Posted by purplefiend
I got a free Necchi, from the late 60s and the lady said it didn't work very well. The bobbin was a class 66 and it had miles of thread wrapped around the inside of the hand wheel; also lots of thread wrapped around the bobbin hook, there was so much lint under the needle plate that the feed dogs didn't move very well.
Once I freed it from its thread prison, put the correct bobbin in and oiled it. The machine took off like a race horse.
It now belongs to my daughter's friend, he was so happy to have a machine that didn't come from WM and not sew very well.
Sharon
Once I freed it from its thread prison, put the correct bobbin in and oiled it. The machine took off like a race horse.
It now belongs to my daughter's friend, he was so happy to have a machine that didn't come from WM and not sew very well.
Sharon
Amelia
05-03-2013, 08:25 AM
Member
Join Date: May 2013
Posts: 30
Here are the pictures of what i believe to be a Richmond. Any info is appreciated. I have found what I believe to be the model number of 2601777. It also has a Gold Metal plate on front that says Charles William Stores New York City. Thanks, and Thanks for allowing me into your community.
05-03-2013, 08:45 AM
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
[ATTACH=CONFIG]411514[/ATTACH]
it looks a bit like my Vindex Special.
it looks a bit like my Vindex Special.
05-03-2013, 08:57 AM
Member
Join Date: May 2013
Posts: 30
Yes it does, except for the decals. You can't see them much in the picture though. Very Similar.
05-03-2013, 09:14 AM
Senior Member
Join Date: Mar 2012
Location: Brookfield, IL
Posts: 862
Originally Posted by bpeace4u
Yes it does, except for the decals. You can't see them much in the picture though. Very Similar.
~Grant~
[ATTACH=CONFIG]411525[/ATTACH]
05-03-2013, 09:20 AM
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
nice old gal... It would be fun to do a little cleaning and make her hummmmm....
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM
