what would you sell this for

Old 12-09-2011, 01:33 PM
  #11  
Super Member
 
Join Date: Sep 2009
Location: Massachusetts, USA
Posts: 1,775
Default

Originally Posted by Candace View Post
They have a lot of "rules" and beware if you don't follow them. I know this first hand! :<
Yeah, me too...lol!
cabbagepatchkid is offline  
Old 12-09-2011, 04:46 PM
  #12  
Senior Member
 
Join Date: Oct 2009
Location: montana
Posts: 620
Default

Originally Posted by Candace View Post
Actually, the Vintage Singer group will not allow any posts to ask the "worth" of machines. You will get a very nasty e-mail from the moderators. They have a lot of "rules" and beware if you don't follow them. I know this first hand! :<
Vintage Singers group does have rules--and they are clearly stated on pricing. there is such a wide area of prices, depending on the condition, that no one could be expected to give you a price. and areas of the country differ also.
but---ask these people any question on operation, cleaning, fixing, and they will bend over backwards to help you.
so many years of expertise in that group !!
smitty is offline  
Old 12-09-2011, 05:49 PM
  #13  
Member
 
Join Date: Nov 2011
Posts: 13
Default

Quote Originally Posted by Candace View Post
They have a lot of "rules" and beware if you don't follow them. I know this first hand! :<

Originally Posted by cabbagepatchkid View Post
Yeah, me too...lol!

Yea! me three! . . .and I was following their rules and still got barked at.
logofflater is offline  
Old 12-09-2011, 07:02 PM
  #14  
Super Member
 
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Default

Originally Posted by logofflater View Post
Quote Originally Posted by Candace View Post
They have a lot of "rules" and beware if you don't follow them. I know this first hand! :<




Yea! me three! . . .and I was following their rules and still got barked at.
Yup. I just lurk now and will never post again. I understand there are rules, but the utter rudeness and nastiness of the moderators there turned me off completely. I made the mistake of posting a thank you for your help-gasp, not allowed. And then I didn't trim a post to her satisfaction and was sent a flaming message about it. Nope, I don't need dictators or thread nazis in my life. LOL! I agree, the information and the members are great, it's the one moderator there, in particular that needs a chill pill.
Candace is offline  
Old 12-09-2011, 07:25 PM
  #15  
Senior Member
 
cherylmae's Avatar
 
Join Date: Nov 2010
Location: Valley, Washington
Posts: 487
Default

Miss Dixie, is this the machine I was using for the hat making? I can't believe $30.00? $75.00 is awful cheap in my thought.
cherylmae is offline  
Old 12-10-2011, 04:24 AM
  #16  
Power Poster
 
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Default

Finding the value is very tough. You may have to go by what you see locally over time. (That bentwood case is worth more than $30 on ebay Charlee) A working machine - depends on a lot. Has it been serviced? cleaned and oiled? Have cords been replaced? I know you CAN buy the machines inexpensively in some parts of the country - other places it is a different story. I usually base my prices on what I have in it plus what time I had to put in it. Sometimes I come out on the short end but I chalk it up to learning experience. I'm still less expensive than if you buy it for cheap and then have to take it to a shop just to make it work. If you do the work on it yourself then buy the cheap ones and fix them up - some times you will end up with a machine for parts. If you don't work on them at least educate yourself enough to know what it will need and whether or not any work has already been done. Take some time playing with the machine. I get people who come over and really play with a machine. I LOVE that. Then I get people who pick it up, pay and leave - they worry me. I would say that about any machine you get cheap is GOING to need SOME work - at least the ones I find do. How willing are you to do that work yourself. I know some people look at a vintage machine that needs work and give up - they sell it cheap - then go buy a plastic machine at WM or where ever. The good news is most vintage machines can be made to work and will outlast those new ones every time. I don't blame the Vintage Singer group for not allowing worth posts. It is a dis-service to a well serviced machine to sell it for less than it is worth and it is equally a dis-service to sell one for more than it is worth.... When you look at the machine check to see if it is clean inside and out. Check for lint and dried up yellow oil. Does it turn freely? Is the tension set right? Is there any rust? If it has gears inside are any cracked? No gears? That's ok unless they are missing. Does the machine stitch nice? Does the bobbin winder work? How does the machine sound? Does it purr? roar? click? squeal? smoke? Does it zig and zag? Do all the levers and knobs work? Is the needle going down the center of the hole? I've worked on a few machines and I still am learning new things that can be wrong. I bought a Spartan that looked fantastic - everything checked out. The tension had some drag. I hand turned it and it made a nice stitch. I never plugged it in though. I got home and had nothing to do. I was amazed. Then I thought I would sew a quilt for DGS on it. It would take a stitch or two and nothing. Well, it was a loose tension spring - I had to figure out how to fix it. I'm thankful for good directions on line. It could have cost a hefty service fee. I bet that was why it was in such good shape - maybe it just never was right. Had it been top dollar, my goof there would have been to not spend enough time checking it out and not running it with fabric in it. Don't get me wrong it was still worth what I paid. Beauty is in the eye of the beholder isn't it.

Last edited by miriam; 12-10-2011 at 04:27 AM.
miriam is offline  
Old 12-10-2011, 08:27 AM
  #17  
Super Member
 
huntannette's Avatar
 
Join Date: Jan 2009
Location: northern ontario
Posts: 3,648
Default

lol yep.....makes you feel a bit like a criminal...ha ha ha
Originally Posted by Candace View Post
Actually, the Vintage Singer group will not allow any posts to ask the "worth" of machines. You will get a very nasty e-mail from the moderators. They have a lot of "rules" and beware if you don't follow them. I know this first hand! :<
huntannette is offline  
Old 12-10-2011, 08:31 AM
  #18  
Super Member
 
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Default

That's a good post and very true, Miriam.
Candace is offline  
Old 12-11-2011, 03:03 PM
  #19  
Muv
Senior Member
 
Muv's Avatar
 
Join Date: Jun 2011
Location: England
Posts: 822
Default

I'm with Charlee here. I have looked at the photos and wouldn't pay more than fifteen quid. Allowing for currency conversion and the fact that machines are cheaper here, we have pitched in at about the same level. Shame it has a motor on it, but I would say that wouldn't I!

Miriam is right when she says that the case alone could cost more. If you want to make money from an indifferent machine then you massacre it and sell off parts separately. But it's a shame to do that if it sews well and someone would be glad of it.

This machine has that beaten up look, often the mark of a good little work horse. 99s make an excellent stitch. Why don't you keep it? Has it got attachments? If so put on the seam guide and try it out for piecing. If it has the underbraider have a go with that... You could have hours of fun with this machine and end up seriously attached to it. It is worth more for what you can do with it than the money you could raise from it.
Muv is offline  
Old 12-11-2011, 03:17 PM
  #20  
Super Member
 
Charlee's Avatar
 
Join Date: Sep 2009
Location: Idaho
Posts: 6,442
Default

Good points Miriam, and believe me, I'm not trying to dis the machines that you work so hard on and resell...that wasn't my point at all... I believe Muv said it better than I did....

A GOOD sewing machine, regardless of age, is worth much more than the going market for them. This little 99 is a GOOD machine, however, when folks buy these old black girls, they want "pretty" more than they want function, altho they really want BOTH.

I will say that I've noticed the market for the old machines picking up tremendously in this area. A good thing for the value of the machines I already have, not so good for the machines I would hope to own....
Charlee is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TripleL
For Vintage & Antique Machine Enthusiasts
8
08-12-2013 12:26 AM
pacquilter
Main
67
04-28-2012 01:47 AM
greaterexp
Main
2
06-09-2011 09:05 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter