chain stitch attachment question
#1
chain stitch attachment question
Does anyone know, does the chain stitch attachment that goes with the Touch & Sews (mostly 600 series, afaik) fit on/work with the Singer 400 series?
#4
Super Member
Join Date: Jan 2010
Location: western ny
Posts: 1,535
#6
I had never seen one, just knew that there was such a thing. I found one on Etsy; the complete set, with the throat plate, the bobbin cover and the guide finger. As soon as I saw it, I knew that it wouldn't work-the throat plate is wrong.
I think my confusion comes from the fact that I knew that at least one of the 400 series could do a chain stitch, but ISMACS says it's the 411.
WRT chain stitching-some machines (notably the Touch & Sews, apparently) came with an attachment set that would make a chain stitch. I've seen them used for both embroidery and for making slopers and muslins.
I think my confusion comes from the fact that I knew that at least one of the 400 series could do a chain stitch, but ISMACS says it's the 411.
WRT chain stitching-some machines (notably the Touch & Sews, apparently) came with an attachment set that would make a chain stitch. I've seen them used for both embroidery and for making slopers and muslins.
#9
Senior Member
Join Date: Nov 2010
Location: Merritt Island, FL
Posts: 672
To the best of my knowledge (which my be wrong) a chain stitch is mainly a temporary stitch that is used like the closure on a potato/onion/dog food bag. If you pull the right (or wrong, if done accidentally) thread, you can pull out the entire row of stitching. On the DSM, one would use it mainly for temporary sewing to "fit" a garment. Many Sergers do a form of chain stitching. On the DSM, the bobbin thread is not used (if I remember correctly). hence the need for the cover plate. It has been many years since I saw/used a DSM with this feature. It is not something that I desire on my machine.
Thread
Thread Starter
Forum
Replies
Last Post
Janis
For Vintage & Antique Machine Enthusiasts
12
02-23-2012 01:01 AM