THE FWS PONY CLUB QUILT-ALONG Week 1 Discussion Page A Beauty & A Dandy
01-05-2012, 09:05 PM
#31
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,693
Originally Posted by dublb
Freezer paper is white with wax on one side. I grew up calling it butcher paper.
Here's how I did it. I cut my freezer paper 8.5" x11" then ironed it onto some copy paper. I ran that through the printer, & then took it off of the copy paper. When I cut the templates out of the freezer paper I cut 'em out on the dotted line (the finish shape.) These were ironed onto my fabric. I then used my pinking blade in my rotary cutter & using my ruler, cut a 1/4 seam allowance. I used pins to line up my blocks like this lady does.
http://dquilts.blogspot.com/2007/04/how-i-freezer-paper-piece.html
Since this block has so many Y seams I backed stitched at each corner. This was the first time to use this method & boy do I like it.
Here's how I did it. I cut my freezer paper 8.5" x11" then ironed it onto some copy paper. I ran that through the printer, & then took it off of the copy paper. When I cut the templates out of the freezer paper I cut 'em out on the dotted line (the finish shape.) These were ironed onto my fabric. I then used my pinking blade in my rotary cutter & using my ruler, cut a 1/4 seam allowance. I used pins to line up my blocks like this lady does.
http://dquilts.blogspot.com/2007/04/how-i-freezer-paper-piece.html
Since this block has so many Y seams I backed stitched at each corner. This was the first time to use this method & boy do I like it.
Yes, that's what I think of as freezer paper. I haven't seen white here, just the brown/pink what I call butcher paper, too!
Are you using a laser or inkjet printer?
I'm still really hesitant in running it thru my laser printer as the paper gets hot when printing.
If the two papers stick to each other, and you peel it apart, how is there any stick/wax left to stick to the fabric later?
Will read the link before I tackle A Beauty ... not sure when that'll be, as I still have those FWS blocks I promised myself I MUST do first!!
01-05-2012, 09:31 PM
#32
Super Member
Join Date: Apr 2010
Location: Brady TX
Posts: 6,613
Originally Posted by QuiltE
Thanks for the link and the help!
Yes, that's what I think of as freezer paper. I haven't seen white here, just the brown/pink what I call butcher paper, too!
Are you using a laser or inkjet printer?
I'm still really hesitant in running it thru my laser printer as the paper gets hot when printing.
If the two papers stick to each other, and you peel it apart, how is there any stick/wax left to stick to the fabric later?
Will read the link before I tackle A Beauty ... not sure when that'll be, as I still have those FWS blocks I promised myself I MUST do first!!
Yes, that's what I think of as freezer paper. I haven't seen white here, just the brown/pink what I call butcher paper, too!
Are you using a laser or inkjet printer?
I'm still really hesitant in running it thru my laser printer as the paper gets hot when printing.
If the two papers stick to each other, and you peel it apart, how is there any stick/wax left to stick to the fabric later?
Will read the link before I tackle A Beauty ... not sure when that'll be, as I still have those FWS blocks I promised myself I MUST do first!!
While you were posting here I was answering you in the picture thread. My printer is a inkjet. So it doesn't get that hot. Why don't you try one first & see how it does before you go through the trouble of doing the blocks & it not working.
01-06-2012, 05:47 AM
#33
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,693
Originally Posted by dublb
This is funny. While you were posting here I was answering you in the picture thread.
My printer is a inkjet. So it doesn't get that hot. Why don't you try one first & see how it does before you go through the trouble of doing the blocks & it not working.
While you were posting here I was answering you in the picture thread. My printer is a inkjet. So it doesn't get that hot. Why don't you try one first & see how it does before you go through the trouble of doing the blocks & it not working.
I'm still not sure ... too worried about ruining the printer.
Maybe someone will post about using a laser?
01-06-2012, 03:09 PM
#34
Super Member
Join Date: Aug 2011
Location: Covington, Indiana
Posts: 1,659
Originally Posted by QuiltE
Hey MiraB ... nothing wrong with being organized and ahead of the game! We always need trailblazers. Besides, you folks down under are ALWAYS ahead of us!
So ... how about some hints for me on that dastardly A Beauty! Did you take note that I left it for block #2 (or perhaps #42?) and went the easy route for my starter block!!
So ... how about some hints for me on that dastardly A Beauty! Did you take note that I left it for block #2 (or perhaps #42?) and went the easy route for my starter block!!
01-06-2012, 09:13 PM
#35
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,693
Thanks! ... I'm sure it'll all work out. Just looks scary, because there are so many in one block.
Just about to post my latest FWS ... and still have another couple I MUST do, before I can do another PC!
Just about to post my latest FWS ... and still have another couple I MUST do, before I can do another PC!
01-07-2012, 09:50 AM
#37
Super Member
Join Date: Mar 2009
Location: western Pa
Posts: 4,569
Better late than never; finally posted my first 2 blocks. Thank you all for the kind notes and thoughts. I finally got to see all of your blocks and helpful hints. These blocks aren't easy but the sure are beautiful. I love the fabrics everyone is using--how unique each one is.. Love them all.
Earlier someone was looking for Donkey Fabric. Checked at LQS where I got it and it was sold out (who'd have thought that???) but if you're interested, FavoriteFabrics (QB name) here on QB had some last year. You could check with her to see if she has any more.
Earlier someone was looking for Donkey Fabric. Checked at LQS where I got it and it was sold out (who'd have thought that???) but if you're interested, FavoriteFabrics (QB name) here on QB had some last year. You could check with her to see if she has any more.
01-07-2012, 09:53 AM
#38
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,693
"Sew" good to see you here around the ol' corral, Pardner!
You're still ahead of me!! ... I did one and the other is waiting til I get to less than 20 FWS blocks to make. That's only two away now!
And you were fretting about those Y-seams? Looks to me like you nailed them pretty good!
And what? no donkeys in those first blocks?
You're still ahead of me!! ... I did one and the other is waiting til I get to less than 20 FWS blocks to make. That's only two away now!
And you were fretting about those Y-seams? Looks to me like you nailed them pretty good!
And what? no donkeys in those first blocks?
01-09-2012, 03:08 PM
#39
Junior Member
Join Date: Dec 2011
Location: Brazil
Posts: 136
Originally Posted by mirabelle
Hi QuiltE
Not being a fan of Y seams I decided to print the templates onto freezer paper, iron this to my fabric, I then carefully cut each piece out with scissors not rotary cutter. I then drew on my 1/4 inch seam allowance in pencil so I could see where to stop at each corner. I also did a few reserve stitches so it wouldn't unravel on me. It was slow going but was pleased with the end result. Good luck
Not being a fan of Y seams I decided to print the templates onto freezer paper, iron this to my fabric, I then carefully cut each piece out with scissors not rotary cutter. I then drew on my 1/4 inch seam allowance in pencil so I could see where to stop at each corner. I also did a few reserve stitches so it wouldn't unravel on me. It was slow going but was pleased with the end result. Good luck
01-09-2012, 03:15 PM
#40
Junior Member
Join Date: Dec 2011
Location: Brazil
Posts: 136
Originally Posted by dublb
Freezer paper is white with wax on one side. I grew up calling it butcher paper.
Here's how I did it. I cut my freezer paper 8.5" x11" then ironed it onto some copy paper. I ran that through the printer, & then took it off of the copy paper. When I cut the templates out of the freezer paper I cut 'em out on the dotted line (the finish shape.) These were ironed onto my fabric. I then used my pinking blade in my rotary cutter & using my ruler, cut a 1/4 seam allowance. I used pins to line up my blocks like this lady does.
http://dquilts.blogspot.com/2007/04/how-i-freezer-paper-piece.html
Since this block has so many Y seams I backed stitched at each corner. This was the first time to use this method & boy do I like it.
Here's how I did it. I cut my freezer paper 8.5" x11" then ironed it onto some copy paper. I ran that through the printer, & then took it off of the copy paper. When I cut the templates out of the freezer paper I cut 'em out on the dotted line (the finish shape.) These were ironed onto my fabric. I then used my pinking blade in my rotary cutter & using my ruler, cut a 1/4 seam allowance. I used pins to line up my blocks like this lady does.
http://dquilts.blogspot.com/2007/04/how-i-freezer-paper-piece.html
Since this block has so many Y seams I backed stitched at each corner. This was the first time to use this method & boy do I like it.
Thread
Thread Starter
Forum
Replies
Last Post
Honchey
Blocks of the Month and Week
290
04-29-2014 05:29 AM
Honchey
Blocks of the Month and Week
29
04-15-2012 06:31 AM
Honchey
Blocks of the Month and Week
26
04-02-2012 05:53 PM
Honchey
Blocks of the Month and Week
17
01-28-2012 04:09 PM
Honchey
Blocks of the Month and Week
13
01-19-2012 11:11 PM
