January 1, 2013 Whirling Start 2 - Photo's.
01-30-2013, 06:22 PM
#211
Junior Member
Join Date: Sep 2012
Location: Ann Arbor, MI
Posts: 105
I uploaded a picture of what I had done but I think I used the wrong template. I used http://www.quilterscache.com/W/WhirlingStar2Block.html which is different that the one PatriceJ gave.
My Whirling Star 2 block
01-30-2013, 07:28 PM
#213
Junior Member
Join Date: Sep 2012
Location: Ann Arbor, MI
Posts: 105
I uploaded a picture of what I had done (the flowered, orange and pink) but I think I used the wrong template. I used http://www.quilterscache.com/W/WhirlingStar2Block.html which is different that the one PatriceJ gave.
01-31-2013, 11:37 AM
#214
Super Member
Join Date: Sep 2010
Location: Arizona
Posts: 5,578
Originally Posted by Sparkling Lake
[ATTACH=CONFIG]391897[/ATTACH] I am not sure if it uploaded. But if it didn't I am trying to make one section of the four. I have three sewn and when I try to sew the other side of the triangle to finish I get a tuck in the piece that goes to the border right at the intersection of the three. Does that help? Thanks for welcoming me. I really enjoy this group.
April
April
Also possibly the triangle piece is a little off in size. I found block on EQ program and rotary cut my pieces according to EQ directions. Do not give up.
Judy in Phx, AZ
01-31-2013, 04:39 PM
#215
Junior Member
Join Date: Sep 2012
Location: Ann Arbor, MI
Posts: 105
Originally Posted by judy363905
The way I put inserts is to match the points as point of your print fabric to the yellow point....sew just to the seam allowance back stitch. Take off machine rearrange and sew from the center seam allowance out to the sent and press the trainable unit flat with seam allowance toward the other two pieces. Hope this make sense
Also possibly the triangle piece is a little off in size. I found block on EQ program and rotary cut my pieces according to EQ directions. Do not give up.
Judy in Phx, AZ
Also possibly the triangle piece is a little off in size. I found block on EQ program and rotary cut my pieces according to EQ directions. Do not give up.
Judy in Phx, AZ
01-31-2013, 05:46 PM
#216
Junior Member
Join Date: Sep 2012
Location: Ann Arbor, MI
Posts: 105
January BOM
Well I finally did it. I actually have a quarter of the block done. At least I now know how to do a y seam that involves more than 2 pieces. Will have to finish the rest later.
[ATTACH=CONFIG]392152[/ATTACH]
[ATTACH=CONFIG]392152[/ATTACH]
01-31-2013, 06:43 PM
#218
Junior Member
Join Date: Sep 2012
Location: Ann Arbor, MI
Posts: 105
Originally Posted by judy363905
The way I put inserts is to match the points as point of your print fabric to the yellow point....sew just to the seam allowance back stitch. Take off machine rearrange and sew from the center seam allowance out to the sent and press the trainable unit flat with seam allowance toward the other two pieces. Hope this make sense
Also possibly the triangle piece is a little off in size. I found block on EQ program and rotary cut my pieces according to EQ directions. Do not give up.
Judy in Phx, AZ
Also possibly the triangle piece is a little off in size. I found block on EQ program and rotary cut my pieces according to EQ directions. Do not give up.
Judy in Phx, AZ
01-31-2013, 06:46 PM
#219
Junior Member
Join Date: Sep 2012
Location: Ann Arbor, MI
Posts: 105
Originally Posted by Andii
It looks beautiful, Sparkling Lake.
Yes, you can!
Yes, you can!
02-01-2013, 12:33 AM
#220
Administrator
Join Date: Nov 2006
Location: Southeast Georgia, USA
Posts: 9,091
Originally Posted by Sparkling Lake
I uploaded a picture of what I had done but I think I used the wrong template. I used http://www.quilterscache.com/W/WhirlingStar2Block.html which is different that the one PatriceJ gave.
if the photo is accurate, the problem is that you don't have the white triangle lined up correctly.
it looks like you don't have a 1/4" seam allowance left when you get to the intersection of the three pieces.
that's why i recommend you print my templates.
if you line up that template to the pieces you have already cut, you will see how to trim the points so lining things up is easier.
__________________
- necessity is the mother of invention. lazy is the crazy aunt.
- for issues regarding the reminder emails, please contact [email protected]
Thread
Thread Starter
Forum
Replies
Last Post
SulaBug
Blocks of the Month and Week
88
02-03-2013 05:59 PM
BuzzinBumble
Pictures
56
09-07-2011 05:06 AM
