thimblebug6000

[ATTACH=CONFIG]593789[/ATTACH][ATTACH=CONFIG]593790[/ATTACH]The info on the plug says YDK TYPE 32 A and the info on the foot pedal says 819J TW controller YC-50.
Can anyone help me ID what this foot pedal goes to? Thanks!

OurWorkbench

I have an Elna Super Lock L-2 that has that plug but a different pedal. I have in my notes that it will fit many Japanese and some Kenmore machines. Since I have the plug I googled my machine foot control. I ran into a couple of sites that said it would fit my machine, but it was a different plug. I did find https://shop.sew-classic.com/Cord-Se...ore-YDK32A.htm I'm thinking it may fit some other machines as well.

Janey - Neat people never make the exciting discoveries I do.

OurWorkbench

If you try to sell it, I would suggest putting a disclaimer saying that it probably fits these machines and others. It seems like most of the places selling them will tell you to make sure this is the one you need. I would trust the above link more so than some of the others, from what I've seen.

Janey - Neat people never make the exciting discoveries I do.

thimblebug6000

Thank you for taking the time to post. I was visiting my sister in Seattle area and she has it, and wondered what it had belonged to. I didn't want her to dispose of it without trying to find out if it might be useful to someone in the family. I will give her the link and she can look it up if she is interested. Thanks again!

Cari-in-Oly

I've not ever seen this controller with a sewing machine but it is a typical one for older sergers. Since there are only three factories that build sergers chances are it will fit a lot of them.

Cari

thimblebug6000

Ok, thanks, I will tell her this too............