Pillow case/special stitch
11-11-2018, 04:36 PM
#1
Super Member
Thread Starter
Join Date: Nov 2010
Location: Arizona
Posts: 7,850
Pillow case/special stitch
On the hot dog pillow case there is the 2 and 1/2 ' trim piece and when you wash them it never seems to lay flat unless you iron them so I fixed the problem which I saw or heard done before. Before you sew the side and bottom together, I use a complimentary thread and use one of my fancy stitch to sew it down.[ATTACH=CONFIG]603875[/ATTACH][ATTACH=CONFIG]603876[/ATTACH] These are to match my quilt that I made and have to send to be quilted.
11-12-2018, 06:48 AM
#10
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,388
You used very pretty fabrics in those pillow cases.
Stitching that piece down is a good idea.
I've started using a much narrower trim - cut no more than 1 inch wide - only about 1/4 inch is showing after it's sewn in.
Stitching that piece down is a good idea.
I've started using a much narrower trim - cut no more than 1 inch wide - only about 1/4 inch is showing after it's sewn in.
Thread
Thread Starter
Forum
Replies
Last Post
Noel
For Vintage & Antique Machine Enthusiasts
8
06-13-2013 03:02 AM
craftybear
Links and Resources
1
10-09-2011 05:03 PM
craftybear
Links and Resources
27
07-14-2010 12:31 PM
