applique question
I'm new to applique and bought a pattern. If I have a question about where to cut pieces, is it OK to attach a copy of the pattern to question? Don't want to violate any rules. If so, it is an animal pattern that has dotted lines on it - was wondering if I'm supposed to cut at those sections to divide the pattern up.
Thanks for any help. Charl |
Welcome from Southern CA, cbraces. A picture wicked be welcome, too, and help us understand .
|
There's usually a solid line to indicate cutting and a dashed line for stitching, 1/4" in from the cutting line.
|
1 Attachment(s)
hopefully I've uploaded this properly
|
I went to the website for the pattern Sassafras-Lane.com and she has a tutorial on applique on the site, it will probably answer all your questions.
|
I saw that and understand the basics but was wondering if the dotted lines on the pattern have significance
|
Usually a dash line means that the pieces are to fit under the next piece. You do the piece the correct size indicated including the dash part(beak) but the dash part gets slipped under the eye pieces.
|
Thanks. Wasn't sure if I was supposed to cut there to cut in sections
|
No do not cut in to sections. Those are placement lines. If you use an appliqué sheet or parchment over your drawing, lay down piece A first; then layer B over A using the dashed line as your placement, the top of the B piece should come up to the dashed line that says top of B piece, and continue to build your owl in that manner. Hope this helps.
|
Welcome to the QB from SE Michigan! Tartan and Thuimebug are right those are placement lines. Once you start and before you stitch lay out all your pieces and you will see how things are suppose to fit. Hope to see a lot of you around here again welcome to the QB.
|
Hi there and welcome from Texas! Yes, Tartan and Thimblebug got you covered. :)
I don't think any of the applique patterns I've ever used had seam allowances included - you have to add them in the cutting. I usually add 1/8" - 1/4" all around for starch-prepared pieces, depending on the size of the piece and complexity of the design. Simple circles, for instance - 1/8" is fine. For needleturn, I pretty much use 1/4" and trim as necessary for points. Lots of more experienced applique-ers here, so don't hesitate to ask questions when you want to - or show off your work with pictures! We love pictures! :) |
1 Attachment(s)
Thanks everyone for your help. I think I'm getting the hang of it. Haven't ironed it on yet.
|
Originally Posted by cbraces
(Post 8473401)
Thanks everyone for your help. I think I'm getting the hang of it. Haven't ironed it on yet.
You need to add seams only you are doing needleturn appliqué. If you are fusing or doing the buttonhole stitch round each piece, no added seam allowance is required. Hope this helps. |
Originally Posted by cbraces
(Post 8473401)
Thanks everyone for your help. I think I'm getting the hang of it. Haven't ironed it on yet.
|
Completely cute! https://cdn.quiltingboard.com/images...es/thumbup.png
|
1 Attachment(s)
Hi cbraces..Its a tough learning curve,I started applique with a pattern way above my skill level but I got through it after a lot of mistakes ..What I use now with multiable different colors is software Sewwhat it allows me to see, what the piece's that the pattern is going to sew, where the next piece has to go, different color cotton on where you have to glue and cut around, and gives you the ability to jump ahead to see what's happening with the pattern..this is my experience with applique
|
This seems to me to be exactly why this forum is so valuable - instructions almost always leave out some vital piece of information! Years and years ago I wrote an embroidery book (hand embroidery - eek!) and in the introduction I said that instructions were exactly like British road signs (I’m originally from the UK), they tell you exactly where to go, then you get to a roundabout and they tell you exactly where to go then, two or three roundabouts later, the directions just stop. So you have no idea what to do next. If you struggle on and hope for the best then the next roundabout or turning will again tell you what to do, but there always seems to be a gap somewhere where you are left in the lurch. It’s assumed (usually wrongly, or at very least optimistically) by the instructor/roadsign designer that you somehow know or can intuit these bits and still find your way. I’m talking pre-GPS here, obviously! But the Quilting Board forum seems to me to provide the GPS we all need sometimes to make head or tail of opaque instructions! It’s a brilliant resource and the contributors to it so incredibly helpful.
|
Hi Lalla Hope you are safe? Your description of the instruction road map is correct..I followed the instructions on my first applique (far too complicated for the my first applique with 8 overlaps ) and was lead down the garden path into the sea !!!..took a couple of huge mistakes to find out was really going on..The applique instructions were well-meaning,a couple of pages but were an afterthought should have A.B.C.D.E.F ect; but were all over the place, just bad sentence coordination ....I use software to get me through complex layer applications now......Zoo
|
Originally Posted by ZooAnimals
(Post 8474942)
Hi Lalla Hope you are safe? Your description of the instruction road map is correct..I followed the instructions on my first applique (far too complicated for the my first applique with 8 overlaps ) and was lead down the garden path into the sea !!!..took a couple of huge mistakes to find out was really going on..The applique instructions were well-meaning,a couple of pages but were an afterthought should have A.B.C.D.E.F ect; but were all over the place, just bad sentence coordination ....I use software to get me through complex layer applications now......Zoo
|
Originally Posted by cbraces
(Post 8473401)
Thanks everyone for your help. I think I'm getting the hang of it. Haven't ironed it on yet.
|
All times are GMT -8. The time now is 11:03 AM. |