Info about rotary blades and great price.
09-20-2022, 05:08 AM
#11
Super Member
Join Date: Sep 2011
Location: Carroll, Iowa
Posts: 3,302
I ordered these blades you suggested on the day your comment came out and I should receive them today. I'll just change over to my 45mm rotary cutter and see how that works out for me. As I'm getting older, using a small rotary cutter may just be what I need.
09-20-2022, 06:45 AM
#12
Super Member
Join Date: Jul 2008
Location: Keller, TX
Posts: 1,864
Originally Posted by Snooze2978
Just checked on Amazon and their 60mm are not titanium coated as the 45mm and that's what I use. I guess I could change over to the 45mm though. Thanks for the tip.
09-20-2022, 07:48 AM
#13
Power Poster
Thread Starter
Join Date: Jan 2011
Location: Southern USA
Posts: 15,512
I sure hope everyone is as pleased as I am with the blades.
Remember that an old mat is as bad as a dull blade.
Whatever size cutter you use, always use a safety device when cutting. I doesn't matter how careful you are, if a cut can happen it will.
Remember that an old mat is as bad as a dull blade.
Whatever size cutter you use, always use a safety device when cutting. I doesn't matter how careful you are, if a cut can happen it will.
Last edited by Onebyone; 09-20-2022 at 07:54 AM.
09-20-2022, 05:30 PM
#15
Power Poster
Thread Starter
Join Date: Jan 2011
Location: Southern USA
Posts: 15,512
09-21-2022, 02:57 AM
#16
Super Member
Join Date: Dec 2010
Location: Portage, Michigan
Posts: 6,936
Originally Posted by Onebyone
https://www.youtube.com/watch?v=aql4aUvb870 Very interesting about rotary cutters.
The video is worth the watch whether you use the Clover 18m rotary cutter or if you use another brand or size. Short, about 10 minutes, and full of little tips for safe and effective care of a rotary cutter and blades.
09-21-2022, 05:18 AM
#19
Super Member
Join Date: Sep 2011
Location: Carroll, Iowa
Posts: 3,302
That's funny cause I checked the day t his article came out and I could only find the 45mm in the titanium that she mentioned. The 60mm may have been titanium but not the same brand and that's what I thought was important. Will check again though. Thanks.
09-21-2022, 12:57 PM
#20
Power Poster
Thread Starter
Join Date: Jan 2011
Location: Southern USA
Posts: 15,512
I would order any blades at a great price and if the first one out of the package did not cut clean I would return them. That's why I like Amazon, easy returns with no hassle. I dug out my 18 mm rotary cutter I haven't used in years. I cut out pieces for a few blocks and I am liking the small size for cutting layers of fabric.
