Bernina 440 Embroidery Module
08-27-2019, 05:31 PM
#3
Super Member
Join Date: May 2017
Location: Sunny Florida
Posts: 4,421
Hi & welcome.
I make a note of the stitch counter just for reference. The LQS has us go back 10-20 stitches and re-stitch. If the space is more, just go back until you are at the breakage point.
If you ever have to re-hoop, draw an outline around the hoop while still in the hoop. Easier to match up the project.
I make a note of the stitch counter just for reference. The LQS has us go back 10-20 stitches and re-stitch. If the space is more, just go back until you are at the breakage point.
If you ever have to re-hoop, draw an outline around the hoop while still in the hoop. Easier to match up the project.
08-27-2019, 09:03 PM
#4
Super Member
Join Date: May 2012
Location: S.E. Queensland, Australia
Posts: 1,452
Read page 76 of the manual, if this is the same model. You should be able to just press a button till back where you need to be.
https://www.bernina.com/BERNINA/medi...w_04-11-09.pdf
https://www.bernina.com/BERNINA/medi...w_04-11-09.pdf
08-30-2019, 10:36 AM
#5
Power Poster
Join Date: Jan 2009
Location: Reno, Nv
Posts: 16,515
Press the thread image on the screen, then use the back arrow to the place where it broke (maybe a few stitches further back), then press okay. You will be back to where you can start it again.
I don't suggest you un-hoop ever! No need to really for this.
I don't suggest you un-hoop ever! No need to really for this.
Last edited by RedGarnet222; 08-30-2019 at 10:38 AM.
Thread
Thread Starter
Forum
Replies
Last Post
SuzieQuilts
Main
7
08-28-2012 07:08 AM
