Go Back  Quiltingboard Forums > Main
Any Tips for a beginner FMQ-er? >

Any Tips for a beginner FMQ-er?

Any Tips for a beginner FMQ-er?

Thread Tools
 
Old 04-24-2011, 06:55 AM
  #31  
Super Member
 
soccertxi's Avatar
 
Join Date: May 2010
Posts: 1,659
Default

I like to use a white board to practice new designs. Don't put your wrist down as you are teaching your arm the design. Low odor markers are a MUST...unless you want to asphyxiate yourself! (ask me how I know this! HA!) I also look at pantograph sites. Often I find designs I like that I think I can freehand. I don't print them as that is copywrite infringement. Rather I try to do my own version. Happy practicing! (I use my practice pieces to make dog beds!)
soccertxi is offline  
Old 04-24-2011, 07:08 AM
  #32  
Power Poster
 
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,699
Default

I am far from a FMQ-er ... just a wannabe!

Two suggestions I have been taught, and make sense to me ...
* practice with pencil and paper, to get the idea of where to go and how to do it! ... productive doodling, is what I call it and can do it anywhere, anytime!

* never move your hands on the quilt, with the machine running! Stop the machine, reposition quilt and hands before starting to stitch again!

I do better doing something, than just practice sandwiches ... so I see a lot of mug rugs, placemats and pot holders in the future!!!
QuiltE is offline  
Old 04-24-2011, 07:20 AM
  #33  
j
Senior Member
 
Join Date: Aug 2010
Posts: 430
Default

On a scale of 1 to 10 I think I am now a 2. I have to control my speed sometimes it is fast and other times I think to slow. I just finished a wall hanging and my circles need help but I will keep trying, next time with music, that should help. AND everytime I think what the cost of sending it away is, I will keep practicing. I like writing someplace on the quilt who it is for and from whom._-J
j is offline  
Old 04-24-2011, 07:32 AM
  #34  
Member
 
vcinwa's Avatar
 
Join Date: Nov 2010
Location: Port Orchard, WA
Posts: 38
Default

When I was starting out someone said to practice for one hundred hours. So I made some charity quilts and offered to quilt charity quilts my friends made - let them know I'd be practicing - and kept at it. I'm sure I hit the hundred hour mark somewhere in there. I'm very comfortable now. Other tips: use a topstitch needle and high quality thread. I love So Fine! from Superior Threads. It's a little finer, so won't show up as much as a thicker thread. Use quilting gloves. Put a Supreme Slider on the throat of your machine, it really makes a difference when your quilt slides freely. It is also very helpful to have a cabinet for your machine so that the throat is level with the top of the cabinet. I also put a table behind my cabinet to hold the weight of the quilt. If it's sliding off the cabinet you'll have jerky stitches. Relax and good luck!
vcinwa is offline  
Old 04-24-2011, 08:17 AM
  #35  
Super Member
 
Join Date: Jul 2010
Location: Newberg, OR
Posts: 1,911
Default

I can't say enough good things about Leah Day's FMQing Project. I set up my laptop next to my sewing machine, watch her design tutorials, and then try to do what she does. I doubt I would ever have attempted it without her.
catrancher is offline  
Old 04-24-2011, 08:36 AM
  #36  
Member
 
Join Date: Dec 2010
Posts: 27
Default

A Bernina is a wonderful machine to use for FMQ'g. Far less tension problems to deal with and a better stitch than other machines, IMO. As far as gloves, I've alway found that inexpensive garden gloves that fit and have the little knobbies on the fingers worked best for me. There is also a weighted red quilting "halo" that you can lay over your fabric and use it to move the fabric around -- check Sharon Schaumbers daughter's site, "purple daisies". I've also seen in sold on other sites. Other than that, use a sharp or quilting needle, I've never felt a need to use a Bobbin Genie with a Bernina, but that may be just me. Don't be afraid to draw designs by hand or with a stencil to follow. It will get you used to the different movement, doing curves, etc. Stitch in the ditch is a cinch with you walking foot and feed dogs UP. With a little practice you'll soon get a feel for placing that needle right in the ditch. After you've practiced for a while, don't be afraid to take your machine off slow speed and go for it. You will learn to control your speed on your own for even stitches. And you'll find there are time you can go very fast as long as you get in and out of points quickly, If you don't the needle goes up and down too many times in the same spot and can break the thread. Don't be afraid, just go for it. You have one of the best machines available for FMQ on a domestic. Good Luck!
marycontrary is offline  
Old 04-24-2011, 08:52 AM
  #37  
Member
 
Join Date: Dec 2010
Posts: 27
Default

VCINWA makes a lot of good points. If you can, get your machine top level with the top of your table. If you don't have a cabinet that allows you to sink the machine down, there are a few alternative. Many people have cut a hole in a regular table or desk, made something below to hold the machine at the correct level so sewing bed of machine is level with table, and then used there own extended table (which most Bernina's come with) or a purchased acrylic table that fits right up to your machine and extends out to cover the hole. There are also many cabinets and portable tables that can be found on the internet. Laura Day offers a couple on her site. So does Hancocks and Joann's. The lower height of the machine and level surface "REALLY" makes FMQ'g a lot more comfortable and gives you a lot more control.
marycontrary is offline  
Old 04-24-2011, 09:06 AM
  #38  
Member
 
Join Date: Feb 2011
Location: Las Vegas
Posts: 13
Default

Spraying your sewing machine base before hand with Armour All helps it glide along much easier. And don't forget to breathe,I have been a proud owner of a longarm and was told by my dealer and teacher to BREATHE and it will flow. And if the gloves are too hot then the rubber tips from the office supply store also work well.
sewsecksy is offline  
Old 04-24-2011, 09:46 AM
  #39  
Super Member
 
mgshaw's Avatar
 
Join Date: Jul 2007
Location: Oklahoma
Posts: 3,075
Default

Dont mash down hard with your hands!!!! Use a very light touch. I try to just use my figer tips.
For stitch length, with a regular foot and feed dogs UP. rest your hands lightly on the fabric and stitch out a line, slowly, feeling the movement of the fabric as it makes the stitches. This will give you a feel for how to move you fabric when you go to FMQ.
mgshaw is offline  
Old 04-24-2011, 10:01 AM
  #40  
Super Member
 
Join Date: Apr 2010
Location: Fort White, Fl
Posts: 2,689
Default

I am working on the third one now and I am finding it easier this time. It will take a while for any fancy designs but I have stippling down fairly well.
I agree with the gloves because I found since I found this hint on this board that it is sooooo much easier to control your quilt.
lillybeck is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
narnianquilter
Main
51
08-23-2013 10:45 AM
charmpacksplus
Main
2
01-22-2012 10:22 AM
kristen0112
Main
14
08-28-2010 09:16 AM
craftybear
Links and Resources
1
07-13-2010 09:10 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter