Go Back  Quiltingboard Forums > Main
Applique >

Applique

Applique

Old 03-27-2011, 08:01 AM
  #41  
Senior Member
 
quilter64779's Avatar
 
Join Date: Feb 2010
Location: Missouri
Posts: 313
Default

You have to get under the applique not along the side for them to be invisible. I use alot the thread you are using but I also use machine embroidery thread. You choose one that is just a shade darker and it blends well. Good luck you will enjoy it very relaxing tome
quilter64779 is offline  
Old 03-27-2011, 08:06 AM
  #42  
mac
Super Member
 
Join Date: Sep 2010
Location: California, USA
Posts: 1,318
Default

Originally Posted by sewingladydi
Originally Posted by cherylynne
I use a single silk thread. I do needle turn applique and the stitches are almost invisible. If you want the stitches to show, as in a buttonhole edge stitch, you can use one strand of regular cotton thread in a contrasting or coordinating color.

Do you use a neutral like gray or beige or do you match the color to the applique piece? I'm starting on needle turn and using guterman cotton (50 weight), but my stitches are not as invisible as I'd like.

Someone suggested to use the 60 weight cotton thread and someone else suggested the Masterpiece threads from Connecting threads.
I like to use silk thread, as the thread is very fine and really light weight. When I first started using the thread I found it difficult to handle as the thread has a tendency to slip out of the needle a lot. Here are a couple of hints for using silk thread:

You will need to buy some 'Thread Heaven'. It comes in a small cobalt blue box that I would guess is about 1" by 1" in size. This is a thread conditioner that you can use on all threads to help keep them from knotting/tangling while sewing. It works especially well on silk thread because it gives the thread a little more weight and keeps it from being so 'fly-away".

When you applique a piece you always use single thread, unless you are outlining the piece as in doing a blanket stitch for decoration work. However, for decoration I usually use pearl cotton for that.

When you thread your needle, never use a thread longer than your forearm. If the thread is too long it will just tangle and wear thin in some places and have a tendency to break. When you are rolling the thread off the spool, hold the end of the thread in your fingertips and cut the thread at your elbow.

After threading your needle with silk thread, bring the needle to about 2 inches from the end of the thread and tie a double knot at the end of the needle. Knotting your thread at the needle will hold the thread in place so that the thread won't slip off the needle. The silk knot will be fine enough that you won't even notice the knot going through the fabric. Trust me on this. Before I started knotting the needle, I can't tell you how many times I realized that I was sewing with an empty needle.

As for color, the silk thread is so fine I rarely match my thread to the project. Silk thread has a tendency of melting into the fabric and takes on the color of the piece you are sewing with. I usually buy: white, taupe, grey and black. Once in a while you will need to buy a particular color, but not very often. Just remember that when you make your stitches, your needle should be placed straight down, right next to the edge of the piece you are sewing or just a micrometer under the edge of the fold of where you are sewing. In either case, it will keep your stitches hidden.

Hope this bit of information helps.
mac is offline  
Old 03-27-2011, 08:06 AM
  #43  
Senior Member
 
Join Date: Jan 2007
Location: Mississippi
Posts: 452
Default

I just started using YLI and love it - the other one I have used with good success is Bottom Line - you can Google them to find where you can get them. Enjoy !!!
hawaiilove is offline  
Old 03-27-2011, 08:12 AM
  #44  
mac
Super Member
 
Join Date: Sep 2010
Location: California, USA
Posts: 1,318
Default

Originally Posted by ScrappyAZ
Originally Posted by steelecg
for hand applique - I use silk or aurifil
I am a fairly new quilter and have begun to do some hand applique, which I find very relaxing. I bought quilting thread, which I thought we're supposed to use for hand quilting, but now it sounds like I'm wrong. What do we use quilting thread for?
You use quilting thread for hand quilting the layers together.

Oh, and PS: to my earlier message...

I like using "straw needles" for appliqueing. They are thin needles that will slip into the fabric layers a lot easier than a quilting needle. Jeanna Kimble puts out great ones, as she sews with these, too. You can buy them on line from her or Keepsake Quilting or in your lqs.
mac is offline  
Old 03-27-2011, 08:12 AM
  #45  
Super Member
 
Join Date: Jan 2009
Location: California
Posts: 3,502
Default

When I started using Bottom Line I also "cast on" the thread on the needle. It's a little tricky to do but I thread the needle and then basically make a slip knot by passing the needle through a loop at the end of the thread.

It's like a knot but... not. :P It will come out but you have to deliberately un-do it. So frustrating when it comes unthreaded.
pittsburgpam is offline  
Old 03-27-2011, 08:46 AM
  #46  
Senior Member
 
Join Date: Nov 2009
Location: Texas
Posts: 607
Default

For machine applique I use 50 or 60 weight all cotton. For hand applique I use silk or 60 weight cotton.
martha jo is offline  
Old 03-27-2011, 08:53 AM
  #47  
Member
 
Selina's Avatar
 
Join Date: Aug 2010
Posts: 20
Default

I have always used Mettler's Silk Finish Cotton in the 60wt and had great results.
Selina is offline  
Old 03-27-2011, 09:19 AM
  #48  
Senior Member
 
Join Date: Nov 2009
Location: Wisconsin
Posts: 738
Default

I use Mettlers cotton thread with silk finish, works wonderful for hand and machine.
GrannyHanaDa is offline  
Old 03-27-2011, 09:24 AM
  #49  
Senior Member
 
Join Date: Dec 2008
Location: central California
Posts: 636
Default

I have used the Mettler 60wt. and 50wt. The 60wt. is really fine and disappears nicely. I was always frustrated with not having the right colors (I was always taught to match the thread to the applique piece) and the thought of having to buy 30 spools of thread for one quilt, of which I might only use a yard or two of, well I couldn't afford it. When I discovered the Masterpiece donut with 36 bobbins of different colored 60wt. fine cotton thread, I was so excited. If all your applique is being done with just a few fabrics, then buying full size spools of thread may make sense, buy if you are doing lots of colors, the donut is wonderful. I have always used just one strand, I have never heard of using two, it would be hard to make 2 disappear and not show.
roselady is offline  
Old 03-27-2011, 09:43 AM
  #50  
Super Member
 
thepolyparrot's Avatar
 
Join Date: Nov 2010
Location: Mars
Posts: 2,549
Default

I have tried the YLI size 100 silk, Aurifil size 50 and 60, Coats Dual Duty, Bottom Line, YLI Invisible in clear and smoke and So Fine.

For me, the Bottom Line wins - a light and medium warm neutral and a light and medium cool neutral seem to work for almost all the fabrics I've been using in applique.

The thread is easy to handle and doesn't shred or tangle as easily as the silk or the finer cotton threads. It's easy to knot and tie.

It has no shine on the applique and it won't melt under the iron. It is completely invisible where I've sewn small enough stitches.

I already loved the stuff for quilting, so now I'm really hooked. :)

Bottom Line on bobbins - 12 colors per set:
http://www.superiorthreads.com/shop/...ique/products/ I bought these sets to cover those situations where the neutrals aren't disappearing enough. (But, I now think if I had just added a dark warm and a dark cool neutral, I might never have had to use the colors that actually match the appliques.)

Bottom Line on bobbins - 35 colors in a Bobbin Saver ring:
http://www.superiorthreads.com/shop/...bs-2/products/

Bottom Line on 1420yd spools:
http://www.superiorthreads.com/shop/...bs-2/products/ - if you get silver, cream, taupe and grey, these four colors will disappear on most appliqued fabrics.
thepolyparrot is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MaryKatherine
Pictures
138
05-10-2011 05:05 AM
JudeWill
Main
11
12-07-2009 08:46 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter