Go Back  Quiltingboard Forums > Main
Back to basics, needles and thimbles >

Back to basics, needles and thimbles

Back to basics, needles and thimbles

Thread Tools
 
Old 02-19-2012, 11:50 AM
  #1  
Senior Member
Thread Starter
 
rural01's Avatar
 
Join Date: Dec 2011
Location: Arkansas Ozarks
Posts: 425
Default Back to basics, needles and thimbles

I have been working hard on hand quilting my quilt, but am having some problems. It is nothing I can't deal with, but I'm just wondering if anyone here would have a suggestion or tip.

I'm using Richard Hemming & Son large eye needles, #11. Threading the needle isn't too much of a problem as long as the thread is fresh from the spool. It seems to me that it isn't really any easier than it was when I used to use regular eye #10 needles. These were the only ones I could find in the town where I live. Walmart had some, but they were junk. They bent after the first few minutes of use. It is hard to quilt a straight line with a bent needle. So I went to my LQS. This was all they had.

Anyway, I don't know if it is the smaller size or the larger eye, but I am having a real problem not only trying to grasp the needle, but pulling it through the fabric when it contains any more than two stitches. It will take forever to quilt at that rate. It is also very hard on my thumb. When I attempt to grip the needle, most times it slips right through my fingers. I can't seem to get traction (sorry, NASCAR season just started). I've even tried roughing up the needle with a little emery paper. That helped a little. I'm thinking some kind of device on my thumb might help. Any suggestions?

An unrelated issue--I've bent two needles and broken one. I was pulling it through and apparently don't know my own strength because the needle snapped, right at the base of the eye. The tip went flying. Fortunately for my cats paws, I found it.

Also, I'm using a standard thimble, the same one I have used for seven other quilts with no problem, but I'm thinking it may be time to go thimble shopping. I am having to wrap my finger, (I usually use my index finger) with a cloth bandage in order to not injure my finger with the edge of the thimble. Does anyone know of another type of thimble that might work better? I want to quilt every night in front of the tube, but there are days I have to simply rest my hand.

Thanks in advance. Any advice would be greatly appreciated.
Carol
rural01 is offline  
Old 02-19-2012, 12:48 PM
  #2  
Super Member
 
Join Date: Apr 2010
Location: Brady TX
Posts: 6,613
Default

I ordered Roxannes # 10 quilting needles from Keepsake Quilting. Wow! What a difference they make. They glide through the quilt like butter. If these needles can make such a difference for me, then the ones you are using might make such a difference in how hard it is for you to quilt.
dublb is offline  
Old 02-19-2012, 12:49 PM
  #3  
Power Poster
 
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
Default

I really think your problem with the needles is the larger eye. Some brands of needles are sharper than others; I'm not sure about Hemming.

Amazon has Roxanne needles in size 10 and John James in size 9. Why not order some needles online? If you factor in gasoline costs to shop locally, it's often worth it even if you have to pay shipping.

Is it the finger using the thimble that is getting injured? Or the other finger? I am thinking maybe the lip of the thimble is too sharp? Thimbles are such a personal matter, it's hard to make a recommendation about type.
Prism99 is offline  
Old 02-19-2012, 01:02 PM
  #4  
Super Member
 
mpspeedy's Avatar
 
Join Date: Mar 2008
Location: rural Maryland
Posts: 1,564
Default

I have been handquilting for more than 40 years. I use the tan leather thimbles. They have a little piece of plastic embedded in them to keep the needle from going through them. I also wear a leather thimble on my left thumb. I cut the "skirt" on it down as that digit is shorter. I long ago taught myself to quilt with both hands. It makes is so much easier, especially if you are working on a floor frame. They actually make a little round disk of rubber that you can use to grip the needle with if it seems to be stuck. I have made myself some just by cutting into small circles one of those rubber like disks they sell or give away to open a jar. The larger eye needle is part of your problem. I know as we age it gets harder to see that tiny eye. I make sure I use handquilting thread as it is especially stiffened to make threading the needle easier. Over the years the tips of my fingers have gotten tough from the constant touch of the needle. I really have to jab myself hard to even feel it anymore.
There are various tools on the market for pushing the needle. One of them looks like a modified spoon and another is again a spoon like handle with a small paddle shaped round end. I know that some people have had a lot of luck with them.
mpspeedy is offline  
Old 02-19-2012, 01:32 PM
  #5  
Member
 
Join Date: Jun 2007
Location: tennessee
Posts: 67
Default

I hand quilt with betweens or sharps. I did not like John James needles, but I do use the
thimbles. I also put a finger cot on the finger that I use to pull up the needle. It gives just enough traction to make pulling the needle easy.
spark is offline  
Old 02-19-2012, 01:38 PM
  #6  
Super Member
 
117becca's Avatar
 
Join Date: Oct 2010
Location: dayton OH
Posts: 1,911
Default

I also dropped using the large eye needle. I quilt w/ YLI thread - it's a glazed cotton and is stiffer, and I haven't had any problem threading it thru a regular needle. Once a needle bends, I pitch it. My preferred needle is from Jeana Kimball's Foxglove Cottage. I do use a size 10 Betweens and I think they're sharper than the Roxanne's (which is too bad, because I bought a container of 50 of the Roxanne's)....

btw - I use a leather coin thimble that I get from Joann's. Never have mastered the metal thimbles.

And yes, I only get 2 or maybe 3 stitches on the needle, but that's ok
117becca is offline  
Old 02-19-2012, 01:54 PM
  #7  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,457
Default

Like everything else the quality is not as good as it used to be in quilting needles. I have a package of John James betweens and I do like them. I keep a needle threader handy at my frame and also one of the little rubber/plastic flexible discs for pulling the loaded needle through. I usually use an ordinary metal thimble but I recently bought the flexible plastic thimble with the metal top. It fits nicely and is a pretty pink colour but I am having a hard time getting used to it. I don't hand quilt as much as I used to but I try to do one hand quilted quilt a year. The old saying, "use it or lose it" applies to hand quilting skills too. If there are any upcoming quilt shows with vendors, check out what they have in way of hand quilting supplies.
Tartan is offline  
Old 02-19-2012, 01:56 PM
  #8  
Senior Member
 
Hinterland's Avatar
 
Join Date: Oct 2009
Location: Hudson Valley, NY
Posts: 941
Default

it sounds the quilt sandwich is too tight in your hoop or frame - try loosening up a bit. It's also possible you have a bad pack of needles, if they're breaking when you pull them through.

I use a piece of rubber to pull the needle through when it gets loaded up with stitches. Quilt shops sell rubber finger cots that will work, too.


Janet
Hinterland is offline  
Old 02-19-2012, 02:42 PM
  #9  
Senior Member
 
Join Date: Oct 2010
Posts: 647
Default

The elastic band from broccoli makes a good needle puller/gripper. I use a pair of small needle nose pliers to pull needles. I have been hand quilting since the '60 and my favorite needle so far is the John James #9 betweens. When I have problems with needle bending or breaking it is usually either to tight tension on quilt or a lot of seams to quilt across.
Kat Sews is offline  
Old 02-19-2012, 03:23 PM
  #10  
Super Member
 
Join Date: Jan 2012
Posts: 4,783
Default

I have a brass Roxanne's thimble, and it actually grips the needle to pull it through. You can also use a (medical instrument) hemostat or needle holder. They are readily available, on ebay at at flea markets, and look like tiny needle nosed pliers. Some have teeth on the blades, and if the teeth are too sharp, you can put a piece of tape over each blade so the needle doesn't get scratched.
JustAbitCrazy is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
annesthreads
Main
7
08-16-2015 07:36 AM
TeeGee
For Vintage & Antique Machine Enthusiasts
23
05-21-2012 09:03 AM
wingrider
Main
14
04-15-2010 12:27 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter