Bargello Question
09-17-2011, 08:58 AM
#21
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,693
Originally Posted by carslo
I read this in a jelly roll book I bought and have started to use this method when cutting strips. It works for all size strips - bargellos too trust me it works!
"If you have strips that have been cut selvage to selvage(WOF) along the crosswise grain (which most are as it is easiest), just cut the strips in half on the fold. This works well for a number of reasons.
- it helps keep fabrics on-grain and eliminates the bowing or curving that may occur when fabrics of differing thread counts are used.
- You can get more fabric variation in your quilt design also.
- You can use fat quarters too
- some pre-cut jelly rolls don't have many multiples and this lends itself to more variation."
The above quote is taken from
Nancy J. Martin's Rolling Along - Easy Quilts from 2 1/2 strips ISBN:978-1-56477-841-3 p. 13.
I found out even in high end fabric the strips can curve when sewing the longer strips together.
Good luck and have fun
"If you have strips that have been cut selvage to selvage(WOF) along the crosswise grain (which most are as it is easiest), just cut the strips in half on the fold. This works well for a number of reasons.
- it helps keep fabrics on-grain and eliminates the bowing or curving that may occur when fabrics of differing thread counts are used.
- You can get more fabric variation in your quilt design also.
- You can use fat quarters too
- some pre-cut jelly rolls don't have many multiples and this lends itself to more variation."
The above quote is taken from
Nancy J. Martin's Rolling Along - Easy Quilts from 2 1/2 strips ISBN:978-1-56477-841-3 p. 13.
I found out even in high end fabric the strips can curve when sewing the longer strips together.
Good luck and have fun
* cut accurately, squaring with the fold .... if you don't you are already creating a curve. Worse still if you fold it twice and have two folds, then you're heading towards a ^^ or snake effect
09-17-2011, 10:50 AM
#22
Senior Member
Join Date: Jun 2009
Location: Maryland
Posts: 349
Originally Posted by Carol J.
Are you sure the bow in the fabric didn't come when you were cutting the strips? That happens to me when I use the cutter. Look at your strips pulled out all the way,is there an "elbow" in the center?
Carol J.
Carol J.
What would cause the 'elbow' to happen? Is it the way I cut the fabric? Am I not cutting it straight in the first place? So curious? Thanks.......Patti
09-17-2011, 10:57 AM
#23
Banned
Join Date: Nov 2010
Posts: 4,134
Originally Posted by Patti Mahoney
Originally Posted by Carol J.
Are you sure the bow in the fabric didn't come when you were cutting the strips? That happens to me when I use the cutter. Look at your strips pulled out all the way,is there an "elbow" in the center?
Carol J.
Carol J.
What would cause the 'elbow' to happen? Is it the way I cut the fabric? Am I not cutting it straight in the first place? So curious? Thanks.......Patti
Watch how she adjusts her fabric before cutting.
You can't just cut straight off the bolt.
I only fold once, but it's for the same purpose.
The important part is the very beginning where she REFOLDS her fabric when rematching up the selvages.
http://www.youtube.com/watch?v=iwSjN1MB3wI
Here's another explanation (sans video):
http://www.thequiltingcoach.com/public/847.cfm?sd=2
There was another video that I saw a while back - I'm looking for it..........
eta: sorry can't find it now. :roll:
But those links above should give you an explanation of the how the problem occurs, and the solution to prevent it.
Also, you still need to re-true-up after every few strips are cut.
I made a dozen or so Bloomin' 9 Patch quilts several years ago. You find out really quickly how NOT first truing-up the fabric can screw up all the subsequent blocks and sub-units.
09-17-2011, 10:59 AM
#24
Power Poster
Join Date: Oct 2009
Location: Idaho
Posts: 11,375
Originally Posted by carslo
I read this in a jelly roll book I bought and have started to use this method when cutting strips. It works for all size strips - bargellos too trust me it works!
"If you have strips that have been cut selvage to selvage(WOF) along the crosswise grain (which most are as it is easiest), just cut the strips in half on the fold. This works well for a number of reasons.
- it helps keep fabrics on-grain and eliminates the bowing or curving that may occur when fabrics of differing thread counts are used.
- You can get more fabric variation in your quilt design also.
- You can use fat quarters too
- some pre-cut jelly rolls don't have many multiples and this lends itself to more variation."
The above quote is taken from
Nancy J. Martin's Rolling Along - Easy Quilts from 2 1/2 strips ISBN:978-1-56477-841-3 p. 13.
I found out even in high end fabric the strips can curve when sewing the longer strips together.
Good luck and have fun
"If you have strips that have been cut selvage to selvage(WOF) along the crosswise grain (which most are as it is easiest), just cut the strips in half on the fold. This works well for a number of reasons.
- it helps keep fabrics on-grain and eliminates the bowing or curving that may occur when fabrics of differing thread counts are used.
- You can get more fabric variation in your quilt design also.
- You can use fat quarters too
- some pre-cut jelly rolls don't have many multiples and this lends itself to more variation."
The above quote is taken from
Nancy J. Martin's Rolling Along - Easy Quilts from 2 1/2 strips ISBN:978-1-56477-841-3 p. 13.
I found out even in high end fabric the strips can curve when sewing the longer strips together.
Good luck and have fun
09-17-2011, 11:17 AM
#25
Senior Member
Join Date: Jul 2010
Location: Wisconsin
Posts: 502
Thanks MTS, I looked at both sites you mentioned and I see what I am doing wrong. I cut from the bolt many times. I should cut off a yard and work with it instead. I will follow the instructions from both of these videos and see if I can do better on my cutting. Saving time is not always the best answer as I have found out. Take the time is better. I have been sewing since childhood and I am still learning from you girls.
That elbow in the strip has always bugged me and I will work harder to do the job right.
Carol J.
That elbow in the strip has always bugged me and I will work harder to do the job right.
Carol J.
09-17-2011, 11:27 AM
#26
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,693
Originally Posted by Carol J.
Thanks MTS, ......I have been sewing since childhood and I am still learning from you girls.
That elbow in the strip has always bugged me and I will work harder to do the job right.
Carol J.
That elbow in the strip has always bugged me and I will work harder to do the job right.
Carol J.
And believe-you-me, sometimes I feel as though I've learned more since I joined this Board, than I knew before. For sure, it's been the best thing for me in developing my skills!
09-17-2011, 11:33 AM
#27
Junior Member
Join Date: Mar 2011
Posts: 290
Thank you. Now how do you press the seams...open or to the side?[/quote]
To the side. Since you are staggering seams anyway in a bargello, you can press them all in the same direction. I just find pressing to one side a whole lot easier than trying to press seams open, looks better too if you happen to have any shadowing in the blocks. When it is quilted, the shadowing goes away anyhow.[/quote]
I heard that pressing the seams to the side strengthens the seam. Quilts take a lot more tugging and pulling than clothes, which always have pressed open seams.
To the side. Since you are staggering seams anyway in a bargello, you can press them all in the same direction. I just find pressing to one side a whole lot easier than trying to press seams open, looks better too if you happen to have any shadowing in the blocks. When it is quilted, the shadowing goes away anyhow.[/quote]
I heard that pressing the seams to the side strengthens the seam. Quilts take a lot more tugging and pulling than clothes, which always have pressed open seams.
09-18-2011, 03:14 AM
#29
Member
Join Date: Jan 2011
Posts: 30
Reversing sewing seams is correct. The most important way to control the bow is to cut strips running the length (up the selvedge) not crosswise and do not cut long strips. Work with lengths that are no more than 18 to 20 inches long. It may seem like more cutting but it is worth it to have straight strips. This is particularly important when you are working with crosscuts of 1/2" and 3/4"
Happy quilting
Severna
Happy quilting
Severna
09-18-2011, 03:27 AM
#30
Junior Member
Join Date: Sep 2011
Location: northeastern Oklahoma
Posts: 107
I tend to have a heavy hand when rotary cutting and found that the easiest way to keep everything from going slightly off kilter was to tape a 1" strip of non slip kitchen drawer fabric to the underside of my ruler. this keeps the ruler from moving ever so slightly while cutting...so I don't have to re- square as often
Thread
Thread Starter
Forum
Replies
Last Post
Girlfriend
Pictures
56
05-07-2015 07:45 AM
Dina
Main
29
05-07-2014 08:58 AM
dsb38327
Pictures
95
01-09-2011 06:13 AM
