Go Back  Quiltingboard Forums > Main
Can anyone beat this Boo-boo?? >

Can anyone beat this Boo-boo??

Can anyone beat this Boo-boo??

Old 01-03-2021, 01:39 PM
  #1  
Member
Thread Starter
 
Join Date: Feb 2012
Location: Ellenboro, NC
Posts: 87
Default Can anyone beat this Boo-boo??

I found out last night that i had made the biggest boo-boo in my quilting life. I made my daughter a Lone Star Quilt for Christmas. I didn't gt it quilted though so gave her the top. Everything good so far. Here's where it get funny! I have to laugh or I would be crying. I have a 10' frame which would be 120". (But that is the inches from the outside of the frame) so I have about 110" on the roller. Backing is 108" but the quilt is 119"... Whoops. So I am needing to take off at least 14". The quilt is square so I can't turn it sideways. Does anyone know of any other way to fix this?
Attached Thumbnails pattes-unfinished-lone-star-quilt.-needs-quilted.jpg  
Blue Button is offline  
Old 01-03-2021, 02:24 PM
  #2  
bj
Super Member
 
bj's Avatar
 
Join Date: Apr 2007
Location: Ft. Worth, Texas
Posts: 3,674
Default

Is it possible to quilt the center then a border of quilting going around? Or maybe roll half up out of the way and do it a half at a time? I don’t know how longarms work. I’ve never used one ;0). I know the edge to edge business might be an issue. Maybe make it a duvet cover??
bj is offline  
Old 01-03-2021, 02:26 PM
  #3  
bj
Super Member
 
bj's Avatar
 
Join Date: Apr 2007
Location: Ft. Worth, Texas
Posts: 3,674
Default

By the way, the top is gorgeous! I really like the colors you used!
bj is offline  
Old 01-03-2021, 02:41 PM
  #4  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,445
Default

I would load as much as possible on the frame and leave the one edge unquilted. After the whole top is quilted (except one edge) I would do an independent but complimentary design on my sewing machine. The edges are always easier to do on a sewing machine anyways.
Tartan is offline  
Old 01-03-2021, 02:42 PM
  #5  
Super Member
 
Join Date: Sep 2019
Location: North Idaho
Posts: 1,687
Default

I have a 5' long arm frame with, of course, even less width available for quilting. it really doesn't do anything more than a baby quilt. Buuuut, I have quilted many twin and queen sizes on it anyway. If you are only a few inches off, you can certainly make it work. it's not easy, and you have to modify your quilt pattern but it is possible. This really only works for a meander type of quilt pattern or a very custom pattern where you have individual sections or blocks to worry about at a time.
You unfortunately have to baste the layers together in any traditional way, because you will have significant difficulty keeping the wrinkles out of your back and avoiding the layers shifting if you do not baste.
Pin the quilt to your leaders, but don't line up the centers. instead, orient it so that you can quilt from the leftt edge over as far as your machine allows it.
I use quilt clips and treat the whole clip as a "floated" top.
Stitch what you can and rol the quilt like normal. (if using a meandering pattern, be sure to leave a very irregular edge on the right so that you can integrate it better in the end without a visual line).
You will probably only be able to roll the quilt a few times before the quilt starts getting real funky because the right side just is not going to roll properly.
At some point, unpin the top then repin again, but this time orienting it so that you can quilt form the middle (or where you left off) all the way over to the end of the right side.
When you roll as far as you feel comfortable, unpin again and re pin. but this time from the bottom on the quilt in the same 2 ways listed above.
If you are really lucky, then that is all you need to do! but that is unlikely.....
so, then, I unpin everything again and I use more quilt clips to position the quilt onto the back bars (this may not make sense, so I can give pictures if needed) and just keep repositioning as needed to finish all the quilting.

Yes, this is a pain in the butt, but i don't have any choice. if this is kind of sort of is the solution you're looking for, let me know and I can clarify the bits that don't make sense!
LAF2019 is offline  
Old 01-03-2021, 02:48 PM
  #6  
Gay
Super Member
 
Join Date: May 2012
Location: S.E. Queensland, Australia
Posts: 1,448
Default

I would look at removing the border on one side - or 2 borders on opposite sides - and quilt the middle section first. Then replace the borders and quilt half at a time. You may need to be choosy with the design for the borders, like stippling, so it's not obvious they were quilted in different directions.
Gay is offline  
Old 01-03-2021, 03:19 PM
  #7  
Power Poster
 
Join Date: May 2008
Location: MN
Posts: 24,370
Default

Or would you consider sending it to someone with a larger long Arm?

It is a beautiful top - the colors glow!
bearisgray is offline  
Old 01-03-2021, 03:43 PM
  #8  
Member
Thread Starter
 
Join Date: Feb 2012
Location: Ellenboro, NC
Posts: 87
Default

BJ - Thank you. She picked the colors (all batiks). I really didn't like the burgundy but it kinda grew on me.

Last edited by Blue Button; 01-03-2021 at 03:48 PM.
Blue Button is offline  
Old 01-03-2021, 03:45 PM
  #9  
Member
Thread Starter
 
Join Date: Feb 2012
Location: Ellenboro, NC
Posts: 87
Default

LAF2019--Thank you. I may have to do that.

Last edited by Blue Button; 01-03-2021 at 03:49 PM.
Blue Button is offline  
Old 01-03-2021, 03:50 PM
  #10  
Member
Thread Starter
 
Join Date: Feb 2012
Location: Ellenboro, NC
Posts: 87
Default

Thanks for all your suggestions. It looks like I do have some options.
Blue Button is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter