Embroidery Question
05-18-2011, 03:20 AM
#21
Senior Member
Join Date: Aug 2010
Location: Albuquerque NM
Posts: 674
your bobbin thread needs to be tightened, look in your book.
titanium needles are best, not all metallic thread is good. if it is not smooth as you slide through your finger tips, get rid if it. if it twist and turns into knots as you take it off the cone, get rid of it.life is to short to let this get the best of you. fine a better thread. yli, iscord, is better.
titanium needles are best, not all metallic thread is good. if it is not smooth as you slide through your finger tips, get rid if it. if it twist and turns into knots as you take it off the cone, get rid of it.life is to short to let this get the best of you. fine a better thread. yli, iscord, is better.
05-18-2011, 03:26 AM
#22
Member
Join Date: Mar 2011
Location: Texas
Posts: 36
Have you tried using lingerie bobbin thread in the bobbin? I use this all the time for my embroidery and have never had a problem with it showing on top. I think it also comes in black. Hope you will give it a try; I think you will be pleased with the results.
05-18-2011, 03:31 AM
#23
Senior Member
Join Date: Mar 2010
Location: Marengo, Iowa
Posts: 802
Originally Posted by Buttons922
I know that you are experienced, after I tell you what I did when this same thing happened to me. After tears, waisted thread, machine in the shop, I even lowered myself to read the machines book. The answer for me? Did you put the Embroidery foot on your machine?
When all else fails, read the direcctions. LOL Marge L.
05-18-2011, 03:44 AM
#24
Senior Member
Join Date: Sep 2010
Location: Ohio
Posts: 823
If your thread is not metallic use the same color in the bobbin.
Are you using emb. or top stitch needle ? If you havent had this problem in the past try cleaning and oiling your machine, new needle and make sure you are useing proper stablizer.
Good Luck.
Are you using emb. or top stitch needle ? If you havent had this problem in the past try cleaning and oiling your machine, new needle and make sure you are useing proper stablizer.
Good Luck.
05-18-2011, 04:05 AM
#25
Member
Join Date: Jan 2011
Location: Brooklawn, NJ
Posts: 32
Originally Posted by MommaDorian
I downloaded a couple of free patterns of music notes, to put on a Bow Tuck tote. I'm using gold embroidery thread on top and white poly/cotton thread in the bobbin. I can't keep the bobbin thread from showing through on top. I read my manual, about adjusting the tension, but nothing is working. My tension is normally at 4. I've tried lowering it to 2 and 3 and increasing it to 5 and 6. Nothing happens. Is there something else I might be doing wrong?
If that happens to me and I can not correct it is I will call the place where I purchased the machine . They can answer you question for you . I was having the same prom. with my machine I have a brother Quaffro and I was putting the bobbin in upside down.
TIA
Dorian
If that happens to me and I can not correct it is I will call the place where I purchased the machine . They can answer you question for you . I was having the same prom. with my machine I have a brother Quaffro and I was putting the bobbin in upside down.
TIA
Dorian
05-18-2011, 04:43 AM
#28
Junior Member
Join Date: Nov 2006
Location: georgia
Posts: 198
this happen once to me and I solved it by placing the same color stablizer on the top of the material. for instance I was embroidering a red design and the thread kept showing through so I placed a small piece of red plastic bag on the top of the material and it covered the white. or else use red in the bobbin. both work OK.
05-18-2011, 04:47 AM
#29
Junior Member
Join Date: Jul 2010
Location: Lake Villa, Illinois
Posts: 278
YOu have to adjust your bobbin tension. Coincidentally, the educator from Superior Threads, Cindy Needham just spoke at our guild last night and it was the first time I have heard about adjusting bobbin tension and how to do it.
05-18-2011, 04:56 AM
#30
Senior Member
Join Date: Mar 2011
Location: Michigan's Thumb
Posts: 391
you mentioned that you downloaded free patterns not all free patterns are good. Just a thought have you tried to do a different pattern same thread, material ect. every thing the same and if it works then the patterns are faulty.
I very seldom use metallic thread I to have problems I do use a metallic needle under stablizer and solvy on top loosen the top tention as the metallic thread is thicker than regular thread. Good Luck, and if your metallic thread twists as it come off the spool I take and unwind a few yards of it and it feeds real nice then. My softwear tells me how much thread will be used.
I very seldom use metallic thread I to have problems I do use a metallic needle under stablizer and solvy on top loosen the top tention as the metallic thread is thicker than regular thread. Good Luck, and if your metallic thread twists as it come off the spool I take and unwind a few yards of it and it feeds real nice then. My softwear tells me how much thread will be used.
Thread
Thread Starter
Forum
Replies
Last Post
knotsoflove
Machine Embroidery
31
07-06-2022 07:14 AM
kacklebird
Links and Resources
3
12-21-2011 06:01 AM
CIGAINEROJD
Main
0
02-26-2011 09:39 AM
craftybear
General Chit-Chat (non-quilting talk)
1
01-15-2011 04:13 AM
