Fraying...any solution?
02-24-2016, 10:13 AM
#22
Super Member
Join Date: Jul 2010
Location: East Arkansas
Posts: 2,534
Originally Posted by twinkie
Although I have not used this product, maybe some of you members have. It is called FreyCheck (I think). It is supposed to stop or slow down freying.
02-24-2016, 11:00 AM
#23
Super Member
Join Date: Oct 2010
Location: California
Posts: 1,732
Fray Check can leave a stain on the fabric, so if you use it on the seams and it creeps over into the quilt block, it will leave a mark on it. I have a hard time using Frey Block by June Taylor. It has a huge hole that the liquid comes out o,f and it ends up everywhere. Maybe others have some hints on using it, but I've given up on it. Now if I have a fabric that ravels a lot, I use a very short stitch. If it has raveled so much that the seam allowance ends up being a eighth of an inch, I run a second line of stitching on the seam allowance close to the first line that has been stitched. I've had to do this once in a while and have had good success with it.
03-15-2020, 04:51 PM
#25
Power Poster
Join Date: Jan 2011
Location: Southern USA
Posts: 15,900
If fraying is a big problem then use fusible lightweight interfacing on the back of the quilt top. Many show quilt makers do this to keep the quilt top from stretching or getting wonky before layering and simply to keep the top crisp and smooth.
03-15-2020, 05:08 PM
#26
Super Member
Join Date: May 2012
Location: Central Wisconsin
Posts: 4,391
Originally Posted by tessagin
I've gotten to where I lightly starch before cutting. What you might try is; depending on what kind of starch you use, Iprefer the StaFlo is put a little in a small cup. Use a cotton swab or small flat makeup brush and dip into the starch then run it along the edges. Then let it dry. That should hold it at bay.
The spray bottle I have is a Best-Press bottle. Those sprayers last a long time. Mine is at least 5 years old.
The quilt I was talking about in my post 19 is a Paddle Wheel, not Scrapbasket.
03-15-2020, 08:24 PM
#28
Member
Join Date: Sep 2018
Location: River City, Orygun
Posts: 86
Originally Posted by rryder
I'm also a big fan of starching. It eliminates lots of problems- fraying, fabric distortion (if properly pressed), problems with bias edges, sewing issues, you name it. Most of the time I heavily starch my fabric before cutting, especially if there is any tricky piecing involved. I also like the feel of sewing with stiffer fabric-- I think the stitch quality is much improved and it's easier to get a good consistent quarter or scant quarter inch seam. Starch also works great as a temporary glue for cutting multiple layers at a time.
Rob
Rob
03-18-2020, 07:15 AM
#30
Junior Member
Join Date: Jul 2018
Posts: 100
Originally Posted by twinkie
Although I have not used this product, maybe some of you members have. It is called FreyCheck (I think). It is supposed to stop or slow down freying.
For me, the additional time spent in applying the Fray Check is definitely worth it, both for the actual fray prevention and also for the "piece" of mind knowing my quilt will not dissolve in the wash.
Thread
Thread Starter
Forum
Replies
Last Post
