Go Back  Quiltingboard Forums > Main
The good news & the bad news >

The good news & the bad news

The good news & the bad news

Thread Tools
 
Old 08-13-2019, 10:54 AM
  #1  
Super Member
Thread Starter
 
osewme's Avatar
 
Join Date: Apr 2011
Location: Texas
Posts: 5,546
Default The good news & the bad news

Here's the good news. I just finished making my blocks for my king size quilt top yesterday. I made 35 star blocks & 35 log cabin blocks. The star blocks were done several years ago & I finished up the logs yesterday. Now for the bad news. When I went to measure all my blocks, all of my star blocks are measuring out at about 12 1/4" instead of 12 1/2". My log blocks are all o.k. with unfinished sizes of 12 1/2" (that's what all the blocks should be.). Now I'm really bummed because I will have to square up my star blocks to 12 1/4" & lose most of my points. Plus, because I don't have a 12 1/4" square ruler it's going to take a lot longer when I go to cutting all 70 blocks down to 12 1/4".
I made all those star blocks way before I realized the importance of measuring them after each one I made. Man I must have been out of my mind when I made them! Here's a pic of how they are going to be put together in the quilt. At least I don't have to match log blocks.
What would you do in a case like this?
Attached Files
File Type: pdf
King Quilt.pdf (532.8 KB, 927 views)
osewme is offline  
Old 08-13-2019, 10:56 AM
  #2  
Power Poster
 
Join Date: Nov 2009
Location: Mableton, GA
Posts: 11,194
Default

Well, I know what I would do - trim the log cabin blocks down just a bit to make them the same size as the star blocks. I think it wouldn't be noticeable at all if you do them all. But, I'm sure you will get some much better advice! I hope you can get it to work out.
Stitchnripper is offline  
Old 08-13-2019, 11:00 AM
  #3  
Super Member
Thread Starter
 
osewme's Avatar
 
Join Date: Apr 2011
Location: Texas
Posts: 5,546
Default

That's what I am planning to do but trimming is going to be such a pain without a square ruler that size. I was so hoping to be able to use my 12 1/2" x 12 1/2" ruler for trimming all those blocks.
osewme is offline  
Old 08-13-2019, 11:02 AM
  #4  
Power Poster
 
Join Date: Nov 2009
Location: Mableton, GA
Posts: 11,194
Default

Originally Posted by osewme View Post
That's what I am planning to do but trimming to going to be such a pain without a square ruler that size. I was so hoping to be able to use my 12 1/2" x 12 1/2" ruler for trimming all those blocks.
Yes, it will be harder that way. But it will be worth it!
Stitchnripper is offline  
Old 08-13-2019, 11:10 AM
  #5  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,458
Default

Yes, trim the log cabins down and no one will notice.
Tartan is offline  
Old 08-13-2019, 11:49 AM
  #6  
Power Poster
 
Join Date: May 2008
Location: MN
Posts: 24,390
Default

I am confused - if the log cabin blocks are larger than the star blocks, no points will be lost.

The blocks will go together a lot better if they are all the same size -

You could ease in that 1/4 inch - but I would trim, instead.

Remember - take only 1/8 inch off each side of the ones that are 1/4 inch bigger.
bearisgray is offline  
Old 08-13-2019, 12:04 PM
  #7  
Super Member
Thread Starter
 
osewme's Avatar
 
Join Date: Apr 2011
Location: Texas
Posts: 5,546
Default

Oh my gosh, you are right bear! What was I thinking. I believe I will still save most of my points because I'll be trimming down the log blocks Not the star blocks. My mind is just not working today since I found this problem. I'm not looking forward to trimming all those blocks but I'll do what I have to do. Sometimes quilting is such a challenge for me.

Last edited by QuiltnNan; 08-13-2019 at 02:53 PM. Reason: shouting/all caps
osewme is offline  
Old 08-13-2019, 12:18 PM
  #8  
Super Member
 
Join Date: Jan 2012
Location: NE Missouri
Posts: 6,418
Default

What a striking quilt. You will be happier if you trim 1/8 off of each side, and nobody will notice unless they have a ruler. If anyone criticizes, suggest they do it themselves!
Quilter 65 is offline  
Old 08-13-2019, 12:22 PM
  #9  
Power Poster
 
Join Date: May 2008
Location: MN
Posts: 24,390
Default

Originally Posted by osewme View Post
Oh my gosh, you are right bear! What was I thinking. I believe I will still save most of my points because I'll be trimming down the log blocks Not the star blocks. My mind is just not working today since I found this problem. I'm not looking forward to trimming all those blocks but I'll do what I have to do. Sometimes quilting is such a challenge for me.
Maybe just wait until tomorrow before you start trimming anything????

Think of it as trimming very large HST units to desired size.

Last edited by QuiltnNan; 08-13-2019 at 02:54 PM.
bearisgray is offline  
Old 08-13-2019, 12:34 PM
  #10  
Super Member
 
Join Date: Jul 2010
Location: Central Minnesota
Posts: 1,131
Default

Go to the hardware store to have a plexy glass square cut for you. Should be really cheap.
jhoward is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kathy
Pictures
101
09-29-2012 03:36 PM
QuiltnNan
General Chit-Chat (non-quilting talk)
5
11-22-2011 05:01 AM
Lady Shivesa
Main
18
09-06-2010 11:24 AM
Panda
General Chit-Chat (non-quilting talk)
29
07-07-2010 07:32 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter