Unpicking Tips?
#1
I've had a quilt top stuck to my design wall for several months now, it's a whole top with a mistake smack bang in the middle. I kept thinking I would ignore the mistake and keep going. But I've been inspired by the stories of mammoth unpicking on here, and so I've started pulling it apart.
Have taken off the borders tonight, and started on the blocks. Does anyone have any tips to make unpicking easier? I have a "quick unpick", I think you guys call them seam rippers? I'm easing the two sides apart to expose the cotton, and slicing two or three stitches at a time. I can't pick from the flat side, it's black cotton on black fabric, so too hard to see.
Does anyone have any tips?
Have taken off the borders tonight, and started on the blocks. Does anyone have any tips to make unpicking easier? I have a "quick unpick", I think you guys call them seam rippers? I'm easing the two sides apart to expose the cotton, and slicing two or three stitches at a time. I can't pick from the flat side, it's black cotton on black fabric, so too hard to see.
Does anyone have any tips?
#2
Sorry I really don't have any tips its just a slow tideous process,one that i do not look forward to at any time.I have always heard that you should do it from the backside,but i do it where it is easier for me to get to.I like what you call the seam rippers,is that what is on the package also when you buy them?
good luck
good luck
#6
Hi,
You may find this hard to believe but it works great. Get yourself a mustasche trimmer. You can buy them at Wal-mart or CVS for about $15 or less. You may be lucky and your husband already has one. It takes a little getting used to. The trick is to hold it the opposite way you would use it to shave with the blades pointed down. Hold the seam allowance open with one hand and lightly touch the stitches with the trimmer. They sell a more expensive model in the sewing mail order catalogues to use to rip out embroidery mistakes.
I took one to a quilt retreat several years ago and they passed it around the whole time. On the way home most of the girls stopped and bought their own. When you are done run one of those sticky lint rollers over the fabric to pick up the cut stitches.
Good luck
You may find this hard to believe but it works great. Get yourself a mustasche trimmer. You can buy them at Wal-mart or CVS for about $15 or less. You may be lucky and your husband already has one. It takes a little getting used to. The trick is to hold it the opposite way you would use it to shave with the blades pointed down. Hold the seam allowance open with one hand and lightly touch the stitches with the trimmer. They sell a more expensive model in the sewing mail order catalogues to use to rip out embroidery mistakes.
I took one to a quilt retreat several years ago and they passed it around the whole time. On the way home most of the girls stopped and bought their own. When you are done run one of those sticky lint rollers over the fabric to pick up the cut stitches.
Good luck
#7
Ok..this is how I do it, I slide my ripper under every 4th stitch right along one seam...then turn over and pull the bottom thread which will come out in one long piece then you can just pull out the snippets...
I prefer this method as it doesn't distort your fabrics at all, the stress is on the long thread not the fabric...practice made me perfect at this technique :lol:
I prefer this method as it doesn't distort your fabrics at all, the stress is on the long thread not the fabric...practice made me perfect at this technique :lol:
#9
Thanks so much for the hints!
Over here seam rippers do have Quick Unpick on the packet, it's what they've always been called. Not sure if I'm allowed to put links for advertising, so if you google "quick unpick" and "New Zealand" you'll find one.
And funnily enough, hubby does have one of those moustache trimmers! What a brilliant idea, I'm going to try that tonight! I normally do the every third or fourth stitch thing too, but because this is black and there are so many seams, I've given up, just can't get a good rhythm going.
I managed to get quite a bit done last night while yapping on the phone to a mate, so feeling a bit more positive this morning. Will report back when I've tried the trimmer.
:-)
Over here seam rippers do have Quick Unpick on the packet, it's what they've always been called. Not sure if I'm allowed to put links for advertising, so if you google "quick unpick" and "New Zealand" you'll find one.
And funnily enough, hubby does have one of those moustache trimmers! What a brilliant idea, I'm going to try that tonight! I normally do the every third or fourth stitch thing too, but because this is black and there are so many seams, I've given up, just can't get a good rhythm going.
I managed to get quite a bit done last night while yapping on the phone to a mate, so feeling a bit more positive this morning. Will report back when I've tried the trimmer.
:-)
#10
Originally Posted by Izy
Ok..this is how I do it, I slide my ripper under every 4th stitch right along one seam...then turn over and pull the bottom thread which will come out in one long piece then you can just pull out the snippets...
I prefer this method as it doesn't distort your fabrics at all, the stress is on the long thread not the fabric...practice made me perfect at this technique :lol:
I prefer this method as it doesn't distort your fabrics at all, the stress is on the long thread not the fabric...practice made me perfect at this technique :lol:
Thread
Thread Starter
Forum
Replies
Last Post
Susan7639
Main
7
09-18-2015 07:09 PM