Go Back  Quiltingboard Forums > Main
The Ironing Board Trick >

The Ironing Board Trick

The Ironing Board Trick

Old 12-11-2006, 09:54 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Nov 2006
Location: Central California
Posts: 149
Default

My sewing machine is in a cabinet that sits up against a wall. I was machine quilting and having a hard time managing the fabric. I pulled the cabinet out from the wall and put the ironing board (adjusted to height) between the two.

This is not my original idea, I read it somewhere, but it works like a charm.

What is your favorite tip?

Judy
Judy Gail is offline  
Old 12-11-2006, 10:10 AM
  #2  
Boo
Senior Member
 
Boo's Avatar
 
Join Date: Nov 2006
Location: Michigan
Posts: 484
Default

Judy, I used to use the ironing board set to my left to hold the weight of the quilt while machine quilting. I still struggled because the weight of the quilt would sometimes fall off the ironing board causing me to lose my rhythm. One day I purchased one of those sewing tables at a thrift shop with the well for the machine. I set it up in the dining room next to the table, and another bright light went off. Trust me this doesn't happen often. I got out a folding table and set that one in front of the sewing table so that the machine was sandwiched between the two. I know what you thinking, 'how in the world would this work?' Well, put your chair at the head of the machine! After rolling up your quilt sandwich, and sitting at head of machine, you now have equal surfaces to take the weight. I can free motion or use my walking foot to stitch in ditch or do grid work from this set up. I am always amazed when one of my ideas works! :lol:
Boo is offline  
Old 12-11-2006, 10:58 AM
  #3  
Suz
Super Member
 
Join Date: Nov 2006
Location: Central PA
Posts: 1,920
Default

Boo,
So once you surround yourself with the tables, ironing board, etc, you are actually facing the left side of your machine, rather than in front as we usually do. Right? Suzanne
Suz is offline  
Old 12-11-2006, 01:45 PM
  #4  
Boo
Senior Member
 
Boo's Avatar
 
Join Date: Nov 2006
Location: Michigan
Posts: 484
Default

Exactly, Suz. I roll up the quilt from both sides. Then I begin in the middle and work my way out. When I am through with the roll under the machine, then it gets turned around with the new roll placed in the keyhole. This method has given me more control and less stress. I also wear gloves called Machingers, but any glove for traction works. The dollar store sells gardening gloves with those dots on them. If you find that you are actually dragging the quilt on the table, use some spray polish or wax. This isn't rocket science, just a method I stumbled on that works for me.
PS--no ironing board with this one. The tables are one in front of machine and one in back of machine. Then I sit on head end of machine.
Boo is offline  
Old 12-12-2006, 03:50 AM
  #5  
Member
 
Jezebel George's Avatar
 
Join Date: Nov 2006
Location: Northern Virginia
Posts: 64
Default

Not following - please help. Normally, when straight sewing, I sit with the head of the sewing machine pointing left. The stitching seam is flowing perpendicular from me to the machine. The throat of the machine is to my right.

Are you saying that when you free motion, the machine is rotated so that you are facing it head on? That doesn't make sense to me if you are in the same position to SID. So I am quite confused.

I need more prepositions, please. Once I've lost my bearings, left, right, front and back just confuse me.

Jezebel George is offline  
Old 12-12-2006, 04:24 AM
  #6  
Member
 
Join Date: Nov 2006
Posts: 41
Default

:!: Hi Boo, I had to re-read a couple times too to get it but once I did I flipped out. Being a newbie & just kinda testing the water on a little bit of machine quilting here and there, cause I haven't done much and don't want to ruin it totally or rip out for a night and a half, this is an awesome idea. It is so unconventional, yet so simple. Like they say, keep it simple stupid.....usually works. I am definitely going to give this a shot, and since I've not done much at all I won't have to unlearn a method to relearn this way. I had heard about the polish to keep it sliding, just wipe, wipe, wipe it off. I may have something I can add. These old hands and wrists think they have done enough for me over the years and now like to kick up on me when trying to grab, turn, hold tight, push, etc......I found that rubber finger tips from the office work good. Leaves your hands free so to speak but gives your fingers more grip so you can get away with using less pressure. A box of them, come in small, medium, large at office supply stores, is pretty inexpensive. 8) Betty
Betty is offline  
Old 12-12-2006, 05:15 AM
  #7  
Super Member
 
Knot Sew's Avatar
 
Join Date: Nov 2006
Location: NY
Posts: 5,652
Default



I can't get this straight. Could some one sketch it out and scan it. or set it out using x's and a f for front of machine......... :roll:
Knot Sew is offline  
Old 12-12-2006, 06:19 AM
  #8  
Boo
Senior Member
 
Boo's Avatar
 
Join Date: Nov 2006
Location: Michigan
Posts: 484
Default

I am awful at drawing but may try later. Okay, I sit facing the left end of machine. Remember the needle just goes up and down. It has no direction. When free motion quilting you are the one deciding what direction you are sewing. When you are doing a walking foot for straight lines, you are just moving the fabric from rt. to lt. instead of front to back. For those of you who are still confused, I will figure some sort of sketch when I get home from the shop tonight. Wrapping your head around a foriegn idea is something I struggle with also, so that I need to see it to understand it. Please bear with me, it worth the wait. :lol: In the mean time, have a piece of chocolate.
Boo is offline  
Old 12-12-2006, 08:49 AM
  #9  
Moderator
 
kathy's Avatar
 
Join Date: Nov 2006
Location: on the Texas Coast
Posts: 4,020
Default

I've meandered from this position before and it seems like you can do a larger area before you have to reposition the quilt, it is hard to get used to looking at things from that angle.
kathy is offline  
Old 12-12-2006, 11:29 AM
  #10  
Super Member
 
zyxquilts's Avatar
 
Join Date: Dec 2006
Location: So. California
Posts: 3,769
Default

This sounds like a wonderful idea - one of those "why didn't I think of that?!!" ideas! :D I drew a picture in Paint with my mouse, but I can't figure out how to put it in here. I tried the attach files, but I don't know where the picture went. sorry.
zyxquilts is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
15
04-07-2013 02:59 AM
EllieGirl
Main
8
11-13-2012 07:13 PM
craftybear
Links and Resources
1
08-12-2011 06:51 PM
craftybear
Links and Resources
7
06-02-2011 04:39 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter