Go Back  Quiltingboard Forums > Main
Need help in figuring out size of triangles... >

Need help in figuring out size of triangles...

Need help in figuring out size of triangles...

Old 06-11-2011, 09:34 AM
  #1  
Member
Thread Starter
 
Join Date: Mar 2010
Location: Michigan
Posts: 9
Default

I just bought the Fons and Porter Octagon ruler, 6", and I now need to figure out what size triangle or square to cut to fit it. I bought it at Jo-Ann's and of course they don't carry the triangle ruler that accompanies this ruler. I just re-watched the "triangle bootcamp" episode and that resulted in a HUGE triangle. Each side of this Octagon ruler is 3.75". I would prefer to cut strips and make triangles from that but if I have to cut squares and cut them in 2, that would be ok too. Any suggestions? :shock:
ccm1 is offline  
Old 06-11-2011, 12:57 PM
  #2  
Super Member
 
CoriAmD's Avatar
 
Join Date: Feb 2010
Location: Lake Orion, Mich
Posts: 1,630
Default

try the Fons & Porter web site.... they probably sell all their rulers there :wink:
CoriAmD is offline  
Old 06-12-2011, 04:31 AM
  #3  
Member
Thread Starter
 
Join Date: Mar 2010
Location: Michigan
Posts: 9
Default

I am trying to cut pieces with out having to buy another ruler. I know Fons and Porter sell rulers. I also figured out that because this is an octagon I cannot use a square cut in half, the angles are different.
ccm1 is offline  
Old 06-12-2011, 04:48 AM
  #4  
Senior Member
 
Join Date: Aug 2010
Posts: 601
Default

Graph paper? Without seeing the finished block to visualize what you want, that's my best suggestion.
Mattee is offline  
Old 06-12-2011, 04:53 AM
  #5  
Junior Member
 
Pattycakes's Avatar
 
Join Date: Mar 2011
Location: Mansfield, Ohio
Posts: 104
Default

Can you use the octigon to make a template. Use a regular ruler and measure out the triangle and mark the octagon with a marker or tape where your material needs to stop. cut a strip or strips the depth of the triangle and cut your triangles that way.

I'm sure it would work!
Pattycakes is offline  
Old 06-12-2011, 04:57 AM
  #6  
Banned
 
Join Date: Mar 2010
Location: Sturbridge, Ma
Posts: 3,992
Default

I am definitely math challenged. So when I have situations which you describe, I will draw the finished block on graft paper and then measure to determine the size strip I will need.
Holice is offline  
Old 06-12-2011, 05:11 AM
  #7  
MTS
Banned
 
Join Date: Nov 2010
Posts: 4,134
Default

Originally Posted by ccm1
I am trying to cut pieces with out having to buy another ruler. I know Fons and Porter sell rulers. I also figured out that because this is an octagon I cannot use a square cut in half, the angles are different.
If it's an octagon, then you most certainly can use a square cut in half. An (equilateral) octagon ALWAYS has 4 right angles in the corners. Ask Euclid. ;-) Putting a HST on each corner will get you a square - just like a Snowball block.

Are you sure you don't have a HEXAGON ruler (six sides)?
(I just did a quick search and I can't find a F&P octagon ruler.)

You need 2 setting triangles (cut your square TWICE on the diagonal). That will allow you to have the straight of grain on the top and bottom. Starch the fabric well before cutting to minimize any stretching you might get from handling the bias edges. It's still a right angle triangle, but the 90degree angle is placed in the interior, not on the edge.

When you attach this to the upper right and lower left corners, it will make a parallelogram which will allow you sew these blocks together into rows.

Depending on your color choices for these triangles, it will create a secondary pattern of a star around each hexagon.
MTS is offline  
Old 06-12-2011, 06:37 AM
  #8  
MTS
Banned
 
Join Date: Nov 2010
Posts: 4,134
Default

ooppss!

Ignore that. :roll:

After I posted that, I was cleaning the floor and realized I wrote an answer to another question I'd been figuring out for myself. I've had hexagons and pentagons and penroses floating around in my head for days.

By the time I got back, I couldn't edit it.

The octagon info is correct - in order to make a square, you can use a HST on each of the 4 corners.

For the hexagon, you need equilateral triangles - 60 degrees at each angle, and all 3 sides the same length.

The easiest way to cut those is from a strip. But since they're the same no matter which way you orient them, you need to be careful that the straight of grain edge is always placed next to the top or bottom edge of the hexagon.

Otherwise, you've got bias on the outside edges. A lot of starch of the fabric before it's cut will help contain that.

I usually stack them together with a pin along the straight edge so I can keep track.
MTS is offline  
Old 06-15-2011, 02:26 PM
  #9  
Member
Thread Starter
 
Join Date: Mar 2010
Location: Michigan
Posts: 9
Default

My apoligies! I just realized this is a HEXAGON and not an Octagon! I had just seen a tv quilt show about Octagons and I had that on the brain! What I did was trace one side of the ruler and drew lines up from each side until they intersected. I now know I could make my own template but instead I just ordered the pryamid ruler from Fons and Porter. Life is just easier when I use a ruler and not my own template. Sorry about the confusion.
ccm1 is offline  
Old 06-15-2011, 02:32 PM
  #10  
MTS
Banned
 
Join Date: Nov 2010
Posts: 4,134
Default

LOL!!! I'm sure my answer was just as confusing as I was also thinking about other shapes.

I saw the F&P ruler at Joann's the other day. Not on sale but couponable.

Good luck with your hexagons.
MTS is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Glenda m
Pictures
43
04-18-2015 07:37 AM
Glenda m
Pictures
10
04-14-2015 01:06 PM
Glenda m
Pictures
45
10-10-2014 11:52 AM
btiny36
Main
5
09-28-2013 02:31 AM
gellybean402
Main
10
01-15-2012 07:56 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter