Go Back  Quiltingboard Forums > Main
Confused about cutting strips >

Confused about cutting strips

Confused about cutting strips

Thread Tools
 
Old 03-14-2010, 06:48 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Mar 2010
Location: Buffalo, N.Y.
Posts: 383
Default

Please help a newbie?

The directions say cut a 2" strip, and a 3" strip, and another 2" strip, then sew them...and I'm supposed to end up with a 6" block??? I don't get it.

I have been looking at the "Warm Wishes" quilt here:
http://www.quiltmaker.com/patterns/d...html?idx=5185_

Could someone explain?
Thanks
Beth33 is offline  
Old 03-14-2010, 06:51 PM
  #2  
Super Member
 
Join Date: May 2009
Location: Central PA
Posts: 5,573
Default

If you take 2 + 3 + 2 inch (total 7in) strips and sew them together with an exact scant 1/4" you will wind up with a 6" width. Then you would cut the length to get 6" blocks unless your strips were 6" long. If you get more or less than 6" when you sew the strips together, you need to readjust your 1/4" and try again. The extra is taken up in your seams.
nursie76 is offline  
Old 03-14-2010, 06:55 PM
  #3  
Super Member
 
CAROLJ's Avatar
 
Join Date: Feb 2010
Location: Rancho Mirage, CA
Posts: 1,855
Default

If you use a 1/4" inch seam you will have used 1" in the seam, thus 6" block. The seam allowance takes off 1/4" from each strip. Hope this helps.
CAROLJ is offline  
Old 03-14-2010, 07:41 PM
  #4  
Power Poster
 
Join Date: Nov 2007
Location: SW Iowa
Posts: 32,855
Default

That does make sense. How does it fit into the quilt?
littlehud is offline  
Old 03-14-2010, 08:17 PM
  #5  
Super Member
 
Join Date: May 2009
Location: Central PA
Posts: 5,573
Default

Originally Posted by littlehud
That does make sense. How does it fit into the quilt?
If you look closely at the pattern, the 3 strip 6" block is every other block. I really like that pattern.
nursie76 is offline  
Old 03-14-2010, 08:36 PM
  #6  
Power Poster
 
amma's Avatar
 
Join Date: Jul 2007
Location: Out searching for some sunshine :-)
Posts: 58,856
Default

Originally Posted by Beth33
Please help a newbie?

The directions say cut a 2" strip, and a 3" strip, and another 2" strip, then sew them...and I'm supposed to end up with a 6" block??? I don't get it.

I have been looking at the "Warm Wishes" quilt here:
http://www.quiltmaker.com/patterns/d...html?idx=5185_

Could someone explain?
Thanks
when you add the widths of the 3 strips together and subtract off all of the seam allowances your strip will measure 6 1/2" and when you cut this strip into 6 1/2" blocks, take a 1/2" off that for additional seam allowances your block will finish at 6".

Almost every block in every pattern will be a 1/2" bigger all the way around when "unfinished."
amma is offline  
Old 03-15-2010, 03:27 AM
  #7  
Senior Member
Thread Starter
 
Join Date: Mar 2010
Location: Buffalo, N.Y.
Posts: 383
Default

I still don't understand the math part, but if it makes sense to you guys, then I'll give it a try and see what happens. Have some FQs coming from Ebay that I can play with.....soon I will have "a stash"!!! I'm so excited!

I feel like a kid in a candy store...I want that fabric, and I want that fabric, etc.

Thanks again!
Beth33 is offline  
Old 03-15-2010, 06:33 AM
  #8  
Super Member
 
Join Date: May 2009
Location: Central PA
Posts: 5,573
Default

Originally Posted by amma
when you add the widths of the 3 strips together and subtract off all of the seam allowances your strip will measure 6 1/2" and when you cut this strip into 6 1/2" blocks, take a 1/2" off that for additional seam allowances your block will finish at 6".
Almost every block in every pattern will be a 1/2" bigger all the way around when "unfinished."
Amma, Just checked the referenced pattern and checked the math, and when the 2 -3-2 strips are joined, they should indeed measure 6 inches, not 6-1/2. The pattern then calls for cutting that strip unit into 6 inch squares. I know that is odd as 6-1/2 unfinished is the norm, but not in this case. Just don't want to get our new quilter even more confused. (Usually it is me that is confused, but for some reason, this morning I can see this issue very clearly...mark it on the calendar! lol)
nursie76 is offline  
Old 03-15-2010, 01:52 PM
  #9  
Senior Member
 
newestnana's Avatar
 
Join Date: Nov 2009
Location: Brick, NJ
Posts: 819
Default

So the unfinished block is 6" but after it's finished it will be 5-1/2", right?
newestnana is offline  
Old 03-15-2010, 02:02 PM
  #10  
Super Member
 
Oklahoma Suzie's Avatar
 
Join Date: Aug 2008
Location: Home town: Rehoboth, MA Now living in OK
Posts: 7,774
Default

It sure makes a cute quilt.
Oklahoma Suzie is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ebony
Main
3
04-01-2014 12:12 PM
wildyard
Main
104
02-10-2011 09:32 AM
CompulsiveQuilter
Main
33
01-24-2011 04:03 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter