Go Back  Quiltingboard Forums >
  • Main
  • Newbie question :-) >
  • Newbie question :-)

  • Newbie question :-)

    Thread Tools
     
    Old 10-21-2010, 10:15 AM
      #1  
    Member
    Thread Starter
     
    Join Date: Oct 2010
    Posts: 4
    Default

    So, I'm very, very new to quilting, and I'm sure this is a very elementary question. But I still need help!

    I'm doing a T-shirt quilt. I was trying to make my squares 14" in addition to the seam allowance. Well, that's already gone because I have such trouble cutting precise squares! That's my question. How do I make sure I get exactly the size I need? Some of the sides will be sloped a little because I must've moved a little. I understand now why everything needs to be an exact measurement. I'm assuming I can just bring down the measurement a little, just as long as they are all the same size. But I can't get them all the same size! I am surely not cutting anymore until I figure it out, because I would hate to mess up beyond repair. I have a 12" by 18" mat, and a 18" ruler.

    I know most of you are way beyond me, so thanks for answering my question! :-)
    LesleyMarie is offline  
    Old 10-21-2010, 10:19 AM
      #2  
    Super Member
     
    Butterflyblue's Avatar
     
    Join Date: May 2010
    Location: Texas
    Posts: 1,441
    Default

    Have you stabilized the tee-shirts with something, interfacing or whatever? It seems like cutting a knit might be easier after it is stabilized.

    I like to do my cutting on the floor. If your knees allow, that might be part of the answer. I put a knee on the ruler and it helps keep it firmly anchored where I put it.

    Maybe you can use some of the scraps of tee shirts already cut to practice cutting some more on?
    Butterflyblue is offline  
    Old 10-21-2010, 10:29 AM
      #3  
    Super Member
     
    Join Date: Mar 2010
    Location: Elmira, NY
    Posts: 6,113
    Default

    I was going to suggest the stabilizer, too. That would make a big difference in cutting
    wolfkitty is offline  
    Old 10-21-2010, 10:33 AM
      #4  
    Moderator
     
    kathy's Avatar
     
    Join Date: Nov 2006
    Location: on the Texas Coast
    Posts: 4,020
    Default

    and you don't want a long skinny ruler, the fatter the better, 6X18 would be real good, or even a big square one
    kathy is offline  
    Old 10-21-2010, 10:34 AM
      #5  
    Super Member
     
    sahm4605's Avatar
     
    Join Date: May 2010
    Location: Blue Springs, MO
    Posts: 2,167
    Default

    if you don't want to use stabilizer soak your t-shirts in starch and let them dry then iron the snot out of them. Then get a square ruler or l-shaped ruler and that will help getting them squared up properly. I would also suggest maybe getting a larger mat so that you can just turn the mat or walk around the mat as you cut. that could be part of the problem. the mat is not large enough to accommodate a 14" square. I had to get a real cutting mat when I started making quilts. I had been using a 6 1/2" x 12" cutting mat. it will make a world of difference in the cutting.
    sahm4605 is offline  
    Old 10-21-2010, 11:20 AM
      #6  
    np3
    Power Poster
     
    Join Date: May 2010
    Location: Bakersfield, CA
    Posts: 13,214
    Default

    They really need to be stiff...
    np3 is offline  
    Old 10-21-2010, 12:12 PM
      #7  
    Power Poster
     
    Join Date: May 2009
    Location: NY
    Posts: 10,590
    Default

    I have made about 8 T-shirt quilts. I use my 12 1/2" square ruler and cut my shirts out using that. I do not move the ruler at all. Basically I contort myself to cut out the square so I don't have to move the ruler. I don't stabalize or starch when cutting but as soon as I cut the T-shirt square I have my ironing board right behind me so the cut square goes on the ironing board and I have a 12 1/2" fusible interface ready to immediately put on my cut T-Shirt. I agree with the others, you need a bigger cutting mat too, at the very least it would make things much easier for you and result in more accurate cuts.
    feline fanatic is offline  
    Old 10-21-2010, 12:21 PM
      #8  
    Super Member
     
    quilt addict's Avatar
     
    Join Date: Apr 2007
    Location: Southern California
    Posts: 2,746
    Default

    My only addition is if you are having problem with the ruler slipping, I have added little circles of sandpaper to the underside of my ruler. It helps keep it from sliding if that is an issue. You can find them at the sewing store or make your own.
    quilt addict is offline  
    Old 10-21-2010, 12:30 PM
      #9  
    Super Member
     
    clem55's Avatar
     
    Join Date: Jan 2010
    Location: Lexington,Kentucky
    Posts: 6,163
    Default

    I'd get the iron on stabilizer and get it ironed on BEFORE trying to cut. I've tried marking on knits before, and even that can pull a knit out of line.
    clem55 is offline  
    Old 10-21-2010, 01:29 PM
      #10  
    Super Member
     
    Join Date: Mar 2010
    Location: Anchorage, AK
    Posts: 1,396
    Default

    there is no rule that says the squares all have to be the same size. You can add strips of coordinating fabric to the smaller blocks to bring them up to the size of the larger ones..might even add some interest to the quilt to have some variation in the sashing.
    ktbb is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    vBuckyquilts
    Introduce Yourself
    47
    06-29-2011 04:31 AM
    gixxerangel
    Introduce Yourself
    56
    02-25-2011 03:57 PM
    DianeN
    Main
    21
    09-01-2007 08:04 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter