Go Back  Quiltingboard Forums > Main
Paper Piecing should NOT be icky... >

Paper Piecing should NOT be icky...

Paper Piecing should NOT be icky...

Old 04-19-2012, 04:13 PM
  #11  
Super Member
 
Join Date: Apr 2007
Location: Alturas, CA
Posts: 9,393
Default

I use the cheapest copy paper I can find, and don't usually have a problem with the stitches coming out, but another suggestion I have, since you have shortened the stitch length, is to perforate the paper before stitching, then go ahead and sew your fabrics on. You don't say how much you shortened your stitch length, so that might be another possibility. My machine's automatic length is 2.8, I shorten it to 1.5.
pocoellie is offline  
Old 04-19-2012, 05:01 PM
  #12  
Power Poster
 
ube quilting's Avatar
 
Join Date: Jul 2010
Location: PA
Posts: 10,704
Default

This is a subject that has lots of opinions. A lot of people say they use copy paper with no problem. Every time I tried to use this paper with all the proper stitch adjustments and pulling the block a little to stretch the paper abit to tear it away from the seam, It always loosened the stitching. I find copy paper just to thick for PP. There are some things I feel I just have to spend money on. PP paper is one of them. It is like tracing paper and tears away very easily from the stitching with no problem. Please do not wet the paper trying to remove it. You will have a paper mash mess.

Try running a chop stick along the edge of the stitching to pre- tear the paper then gently pull the finished block (like stretching it VERY GENTLY). this should help to remove the paper.

I also use a seam ripper to gently work out the little pieces that stick in the corners of stitching intersections.
Hope this helps a little. Don't give up.
Stitch length = 1.5
peace

Last edited by ube quilting; 04-19-2012 at 05:04 PM.
ube quilting is offline  
Old 04-19-2012, 05:10 PM
  #13  
Super Member
 
bibliostone's Avatar
 
Join Date: Feb 2010
Location: Ohio, USA
Posts: 1,485
Default

I use copy paper, however, I never shorten my stitches. That just grabs the paper tighter. Also, I start tearing the paper in the middle and go towards the ends.
bibliostone is offline  
Old 04-19-2012, 05:29 PM
  #14  
Senior Member
 
texpat45's Avatar
 
Join Date: Mar 2011
Location: N Texas
Posts: 537
Default

I use copy/printer paper - have never done muslin - and don't shorten my stitches. I run my fingertip under the paper along the seam line or use a letter opener, my Purple Thang or even a table knife and have never had a problem.
texpat45 is offline  
Old 04-19-2012, 06:22 PM
  #15  
Power Poster
 
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,445
Default

I have an ongoing Spiderweb scrap quilt from Quiltville that I am working on. I used the telephone pages for the triangle section and a dab of glue on the center triangle to hold it in place. I stitch and flip out my scraps until the triangle telephone paper is covered and then trim the excess off with a rotary cutter and ruler. I pulled off a couple of my blocks after stitching and the t. paper came out really well. I did use a shortened stitch length. I only pulled the paper out of a couple because I want to leave the paper in until I sew all the sections together. I think it will help with any bias edges and be more accurate. One word of caution about t. paper, I was careful not to use steam on my finished blocks as I didn't want to chance the ink transferring to my fabric.
Tartan is offline  
Old 04-19-2012, 07:09 PM
  #16  
Super Member
 
Join Date: Mar 2011
Location: Peotone IL
Posts: 2,802
Default

I use regular copy paper & do not shorten the stitch from the machine's default of 2.5. After stitching, I fold the paper at the stitching line. Then I run the back of my seam ripper along the stitching line to 'cut' through the paper. I gently pull the paper along the line to get it off. If there are any little bits of paper still caught under the stitching, I gently use tweezers to pry the paper out from under the stitches. I've never had a problem with the stitches tearing.
gramajo is offline  
Old 04-19-2012, 07:10 PM
  #17  
Banned
 
Join Date: Dec 2009
Location: Enid, OK
Posts: 8,273
Default

spritz, run a metal nail file next to the stitches, and tear it off! don't worry about the tiny bits in the seams if your stitches are so loose they are pulling out!
jaciqltznok is offline  
Old 04-19-2012, 07:10 PM
  #18  
Banned
 
Join Date: Dec 2009
Location: Enid, OK
Posts: 8,273
Default

Originally Posted by gramajo View Post
I use regular copy paper & do not shorten the stitch from the machine's default of 2.5. After stitching, I fold the paper at the stitching line. Then I run the back of my seam ripper along the stitching line to 'cut' through the paper. I gently pull the paper along the line to get it off. If there are any little bits of paper still caught under the stitching, I gently use tweezers to pry the paper out from under the stitches. I've never had a problem with the stitches tearing.
you really should use a smaller stitch...to make up the thickness of the paper, once you remove your paper, your stitches will be too large and gaping!
jaciqltznok is offline  
Old 04-19-2012, 07:37 PM
  #19  
Super Member
 
Join Date: May 2011
Location: Pacific NW
Posts: 9,345
Default

I had the exact same issue when I first started PPing. First I switched to vellum and was much happier because it tears easier. Then I switched techniques and now I use the fold-and-stitch method - no ripping! Instead of stitching the line on the paper, fold the paper on that line and stitch right next to it. Trim with an add-a-quarter ruler and you're done. Vellum works great for this technique because you can see through it, so you can see if you're folding on the line.
Peckish is offline  
Old 04-19-2012, 09:17 PM
  #20  
Super Member
 
kitsykeel's Avatar
 
Join Date: Sep 2010
Location: Salisbury, North Carolina
Posts: 1,046
Default

Granny Dean,

Yes, you surely can soak the blocks in warm water. I use copy paper also and it works perfectly well when I soak it. Give it a try, you will be pleased (I hope.) But I recently tried a method I learned on this board from Peckish. She told of folding the paper on the line and stitching right next to it. That way the paper is never attached to the fabric. I do us a bit of glue to hold the pieces I am sewing though. I find that using pins distorts the fabric. Good luck and please share with us a pic of the finished product.

WHOOPS!! I just looked at the post above mine and guess what. It's from Peckish. So you are in good hands now. She is a pro.
kitsykeel is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bearisgray
Main
34
05-24-2019 07:54 PM
craftybear
Links and Resources
0
04-26-2011 01:03 PM
Chasing Hawk
General Chit-Chat (non-quilting talk)
17
05-03-2010 05:45 PM
roselady
Main
10
08-29-2009 11:05 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter