Paper Piecing should NOT be icky...
04-20-2012, 02:28 AM
#21
Super Member
Join Date: Dec 2010
Location: Michigan
Posts: 3,334
Wow, you have a lot of great suggestions. I stitch the paper on the lines without any thread before adding the fabric. I like to fold on the line and trim the seam each time I add a new fabric.... then, it tears off pretty easily as well. I don't shorten my stitch much.
I think you might stretch your block out of size if you do too much pulled on the paper.... Good luck.
I think you might stretch your block out of size if you do too much pulled on the paper.... Good luck.
04-20-2012, 02:47 AM
#22
Super Member
Join Date: Dec 2010
Location: New York City/Manhattan
Posts: 1,316
I've done printer paper for years and years and never had a problem except for losing patience with the process. I now sit outside with a glass of wine and do the removal! makes it much less tedious.
04-20-2012, 06:16 AM
#24
Senior Member
Join Date: Nov 2011
Location: a small village about 65 miles north of NYC
Posts: 551
I use re-cycled copier paper all the time for pp'ing, use a very small stitch and make sure I crease the paper when I fold it back to trim the seam allowance - even if the seam allowance is okay and no trimming is needed, I fold the paper back and run my finger on the line, then un-fold it and start with the next step. Even with tiny intricate pieces I never have a problem with getting the paper off, a pin stuck in a point or corner will start the paper to tear if it doesn't pop out with a gentle twist and my stitches are intact.
04-20-2012, 06:22 AM
#25
Super Member
Join Date: Feb 2010
Location: NE of Fort Worth
Posts: 2,456
I love, love PP! Am using foundation paper from Carol Doak. Its lasted a long time & was cheap. I use 2.5 or 2.0 stitch. Tearing out is the most tedious.
Oh, just read Tartan's tip on not using steam in case ink transfers... Good tip!
Oh, just read Tartan's tip on not using steam in case ink transfers... Good tip!
04-20-2012, 06:28 AM
#26
Junior Member
Join Date: Jan 2011
Location: Central Indiana
Posts: 108
I could not use copy paper. Too heavy. If you don't want to buy foundation paper (Carol Doak has some) I found a tablet of Tracing paper in the art department section. I can use in a copier, with a fight, because it is thin. A computer printer works better if you have your pattern on the computer. That is all I use for paper piecing. Never had a problem.
04-20-2012, 06:33 AM
#27
Senior Member
Join Date: Sep 2011
Location: Virginia
Posts: 811
I use copy paper - I fold it on the seam line, use a little wooden presser (my DH made mine out of a dowl (SP?) rod with the end cut off at an angle) you can buy this too it is called a finger presser - anyway and then I use a bottle of water and spritz the paper. I find it pulls of pretty easy and the fabric needs pressed anyway so the dampness from the water is not a problem.
04-20-2012, 07:07 AM
#28
Super Member
Join Date: Mar 2011
Location: Peotone IL
Posts: 2,802
Originally Posted by jaciqltznok
you really should use a smaller stitch...to make up the thickness of the paper, once you remove your paper, your stitches will be too large and gaping!
04-20-2012, 07:53 AM
#29
Member
Thread Starter
Join Date: May 2011
Posts: 7
Such a generous board...thanks, everyone for the good advice... I was especially made aware of the prospect of doing this all at the end and trying to get the seams to lay flat again. I love quilting and nice to know so many others do as well. Off to sew....Granny Dean
04-20-2012, 09:16 AM
#30
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,379
Originally Posted by kitsykeel
Granny Dean,
Yes, you surely can soak the blocks in warm water. I use copy paper also and it works perfectly well when I soak it. Give it a try, you will be pleased (I hope.) But I recently tried a method I learned on this board from Peckish. She told of folding the paper on the line and stitching right next to it. That way the paper is never attached to the fabric. I do us a bit of glue to hold the pieces I am sewing though. I find that using pins distorts the fabric. Good luck and please share with us a pic of the finished product.
WHOOPS!! I just looked at the post above mine and guess what. It's from Peckish. So you are in good hands now. She is a pro.
Yes, you surely can soak the blocks in warm water. I use copy paper also and it works perfectly well when I soak it. Give it a try, you will be pleased (I hope.) But I recently tried a method I learned on this board from Peckish. She told of folding the paper on the line and stitching right next to it. That way the paper is never attached to the fabric. I do us a bit of glue to hold the pieces I am sewing though. I find that using pins distorts the fabric. Good luck and please share with us a pic of the finished product.
WHOOPS!! I just looked at the post above mine and guess what. It's from Peckish. So you are in good hands now. She is a pro.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
13
05-08-2011 01:56 AM
craftybear
Links and Resources
0
04-26-2011 01:03 PM
