Go Back  Quiltingboard Forums > Main
That pesky 1/4" >

That pesky 1/4"

That pesky 1/4"

Old 02-20-2012, 07:56 AM
  #1  
Senior Member
Thread Starter
 
Termi's Avatar
 
Join Date: Mar 2011
Location: Connecticut
Posts: 412
Default That pesky 1/4"

OK, I have a question. I understand that we're supposed to use a scant 1/4" which works fine if you just sew two pieces of fabric together and iron the seam to one side. Ironing to one side uses up the scant part. However, what do you do when one seam crosses another causing some bulk? If you iron the whole thing to one side, the bulky part takes up more than a scant so part of the seam uses up the scant and the bulky part uses up more than a scant causing things to look wonky. I've tried using a hammer to flatten the bulk, sometimes it works, sometimes not. I've tried not sewing into the seam but that doesn't help the fact that two lines of stitching are crossing each other causing the bulk.
I hope I've explained this clearly. Am I trying to be too perfect? Thanks so much!
Termi is offline  
Old 02-20-2012, 09:37 AM
  #2  
Super Member
 
Join Date: Mar 2011
Location: Peotone IL
Posts: 2,802
Default

I, too, have problems with 1/4" seams, but I have found when crossing seams, it helps to have the seams pressed open. It doesn't completely solve the problem, but it does help.
gramajo is offline  
Old 02-20-2012, 11:43 AM
  #3  
Super Member
 
Join Date: Dec 2010
Location: Norfolk, VA
Posts: 5,397
Default

Steam them into submission. Works great. If they are on the bias you might need starch to keep them from stretching.
romanojg is offline  
Old 02-20-2012, 11:57 AM
  #4  
Senior Member
 
QuiltingCrazie's Avatar
 
Join Date: Oct 2011
Location: Las Cruces, NM
Posts: 751
Default

I press open on lots of seams like pinwheels and 'm doing carpenter blocks for a quilt and I'm pressing them all open so they will lay flat. I try to be perfect too but I don't make quilts for show either mine are all made to be used and loved!!
QuiltingCrazie is offline  
Old 02-21-2012, 05:29 AM
  #5  
Super Member
 
Join Date: Feb 2011
Location: New Rockford, ND
Posts: 2,003
Default

i also go to the side but when doing double seams i press open.
it works for me, mine are not for show either just to be used.
Joset is offline  
Old 02-21-2012, 06:03 AM
  #6  
Super Member
 
117becca's Avatar
 
Join Date: Oct 2010
Location: dayton OH
Posts: 1,911
Default

I guess I don't over-think it. I sew on the same machine, using the same guide for my seam width. There is then consistency thru-out the quilt. If I had several layers of fabric, I would be pressing seams open, too. It reduces the bulk.
117becca is offline  
Old 02-21-2012, 06:31 AM
  #7  
Power Poster
 
BellaBoo's Avatar
 
Join Date: Jan 2009
Location: Front row
Posts: 14,646
Default

I press open all seams that will have four layers or more of fabric in them.
BellaBoo is offline  
Old 02-21-2012, 07:17 AM
  #8  
Banned
 
Join Date: Mar 2010
Location: Sturbridge, Ma
Posts: 3,992
Default

Yes the bulky seams do cause a problem in making the blocks fit. I believe you have to press in such a way and join to give the least bulk at these junctions. Also, fabric weight and thread weight can make a difference. This is why it is always a good idea to make a small practice sample and then adjust according to the nature of the fabric and thread. I find that heavier weight - even #50 can cause more space to be taken up. Even one eight in bobbin and the other in top can give problems. One has to experiment.
I tend to grab any thread handy when thread runs out and if it takes up more space then switch back etc etc etc.
There is no sure way - need to experiement. Then, if I do have a bulk problem, I may shave a bit of one seam allowance to reduce the bulk.
Holice is offline  
Old 02-21-2012, 07:25 AM
  #9  
Power Poster
 
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
Default

if you 'nest' your seams they do not build up- turn one one way the next the other way- & nest them side by side. alternate rows, so seams are pressed in one direction for one row- the opposite direction for the next row- and nest them as you join them. i've heard of beating seams with a hammer-but doesn't that break down the fibers??? an awful lot of work- to just destroy the integrity of the fabric--(just my thoughts)
ckcowl is offline  
Old 02-21-2012, 08:07 AM
  #10  
Power Poster
 
joyce888's Avatar
 
Join Date: Oct 2010
Location: Georgia
Posts: 11,189
Default

I sew the scant 1/4" seam and press my seams open. For me it's easier to get the seams matched and cuts down on bulk.
joyce888 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bearisgray
General Chit-Chat (non-quilting talk)
65
02-01-2024 09:04 AM
vjohn1006
Pictures
111
07-26-2014 03:14 AM
Charlee
For Vintage & Antique Machine Enthusiasts
6
07-26-2012 10:05 AM
emsgranny
General Chit-Chat (non-quilting talk)
31
11-14-2010 03:45 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter