Pfaff sewing machines
01-07-2010, 08:21 PM
#21
Senior Member
Join Date: Sep 2009
Location: Livonia, MI near Detroit
Posts: 627
I just got a Pfaff Creative Vision in September for my 35th wedding anniversary and love it! I wanted one that would do the embroidery since my Janome didn't. I had used the CV in classes I took with Betty Cotton and loved the way it sewed. I know you said you did not want any embroidery but I would get the most machine I could afford. I have wished for a long time that I had the option on the Janome. Best of luck.
Wendy
Wendy
01-08-2010, 09:20 AM
#24
Super Member
Join Date: Dec 2009
Location: Medina NY/Naples, FL
Posts: 1,668
I love my Pfaff. It is a Quilt Expression 2044. I recieved it from my husband a few years ago as a birthday present.
Lots2do, The IDT stands for Integrated Dual Feed. The fabric is fed from top and bottom at the same time so it is very precise. It keeps all the layers when quilting aligned.
Lots2do, The IDT stands for Integrated Dual Feed. The fabric is fed from top and bottom at the same time so it is very precise. It keeps all the layers when quilting aligned.
01-08-2010, 09:30 AM
#25
Power Poster
Join Date: Mar 2009
Posts: 15,639
Originally Posted by daria
what does IDT stand for?
The walking foot is built in and it carries the top fabric and the bottom fabric at the same speed so there is no (or very little) distortion. Makes it easy to match seams and patterns.
01-08-2010, 02:29 PM
#27
Senior Member
Join Date: Mar 2009
Location: Romania
Posts: 447
I have a Pfaff Select with IDT and I love it. It doesn't have too many decorative stitches, but I don't need them !
It is my first sewing machine and the only machine I use for piecing and IDT is wonderful for this.
Of course, it is wonderful for free motion quilting, too!
It is my first sewing machine and the only machine I use for piecing and IDT is wonderful for this.
Of course, it is wonderful for free motion quilting, too!
09-28-2013, 06:03 PM
#29
Senior Member
Join Date: Mar 2013
Location: Mission Viejo, CA
Posts: 832
Does the Pfaff have it's version of the BSR to regulate stiches in FMQ
Originally Posted by Quiltmaniac
It stands for integrated dual feed (I don't know where they get the "T" from).
If you have ever heard of a walking foot attachment, it's the same idea, but it's permanently fixed to the machine, although you can disengage it if you need to. It feeds the two layers of fabric evenly whereas without it, the feed dogs feed the fabric through faster than the top layer feeds through (or is it the other way around?).
I have the Margaret Islander sewing tapes and she demonstrates by sewing together two pieces of fabric, each 45" long. She begins with them even at the top, sews a regular seam, and when she gets to the bottom of the strip, the bottom piece extends by about an inch beyond the top piece. She then demonstrates it again, this time holding the strips up at an angle so that the bottom piece isn't being pushed along by the feed dogs, and at the end they are even! (i.e. she "eases" them in togethe)r.
Still, you can't do this with a couple of 2" squares you are trying to sew together.
I had a machine before the Pfaff for which I purchased a "walking foot" but it didn't work nearly as well and it was also very noisy!
I love my IDT!
If you have ever heard of a walking foot attachment, it's the same idea, but it's permanently fixed to the machine, although you can disengage it if you need to. It feeds the two layers of fabric evenly whereas without it, the feed dogs feed the fabric through faster than the top layer feeds through (or is it the other way around?).
I have the Margaret Islander sewing tapes and she demonstrates by sewing together two pieces of fabric, each 45" long. She begins with them even at the top, sews a regular seam, and when she gets to the bottom of the strip, the bottom piece extends by about an inch beyond the top piece. She then demonstrates it again, this time holding the strips up at an angle so that the bottom piece isn't being pushed along by the feed dogs, and at the end they are even! (i.e. she "eases" them in togethe)r.
Still, you can't do this with a couple of 2" squares you are trying to sew together.
I had a machine before the Pfaff for which I purchased a "walking foot" but it didn't work nearly as well and it was also very noisy!
I love my IDT!
09-29-2013, 01:11 AM
#30
Super Member
Join Date: Jan 2012
Posts: 4,783
I have a Pfaff Tiptronic 2040 with IDT and love it. I used to have an earlier Pfaff Tiptronic, but a friend took it when I bought my Babylock Serenade (which also has upper feed dogs). I wanted the knee lift for the presser foot (both hands free, yay!) and thread cutter of the Serenade, so now my Pfaff Tiptronic is my backup machine. You can't beat having upper and lower feed dogs. I don't ever plan to sew with only lower feed dogs again, if I can help it. Not all Pfaff machines have upper feed dogs---some of the really early machines don't have them, and I don't think the "Hobby" has them, so be aware of that when shopping for a used machine.
Thread
Thread Starter
Forum
Replies
Last Post
SingerSewer
Main
10
06-22-2013 06:24 AM
EvelynAnita
For Vintage & Antique Machine Enthusiasts
9
09-16-2012 07:48 AM
