I believe this is what you are looking for, it is included with the pattern - HTH :o)
http://www.fatquartershop.com/store/...45&Parent_Ids=

If you have a larger version of the twister and you have a 1 1/2" plastic template, then just place the template over the larger twister square and follow the lines. No matter what size, smaller or larger, you can duplicate it yourself. Linda

thank you so much, I think that's what I'm looking for

thank you all for your help

I made my own template from cardboard and then traced around it with pencil and used scissors. I used scraps from the wall hanging. [ATTACH=CONFIG]296305[/ATTACH]

very cute, looks like Christmas

make your own....go to hardware and see if they can cut ya a 1 1/2" square....mark quarter of an inch from right corner (mark with a T for top) and then rotate right and mark all the way around, connect the lines top to bottom....I have a package of square templates I bought somewhere and marked the 3" one this way. We want to see the mini when you get it done....the picture is of 3 ½ and the 6 ½

I tried to post this before, didn't show up! To draft your own use your existing twister tool (no matter what size) and use a 1 1/2" template on top of the twister tool. Square them up, and use a marker to line up the "twisted lines" from the center. I used an additional ruler to make sure the lines were trully straight. This will work on a larger template as well. The angles are worked out mathmatically and will translate into any size. Linda