About to back my first "real" quilt.. Advice?
 

My first project was a baby quilt, which was super easy since the fabric was big enough to cover the back. Now I am about to get my sandwich together for my second project, a large lap quilt (had to buy twin sized batting). I just pulled the batting out of the dryer, so it should be shrunk and ready to go. I've been googling for methods of doing this with fabric that isn't sized large enough to cover the back without piecing it together.

What is your preferred method? Also, any thing I should look out for with grain direction?

It seems some people like to just have a seam down the middle (vertical or horizontal) while others like to offset the seam. For the larger quilts I also saw one suggestion to cut three panels, and have a larger panel in the middle with smaller panels on the sides.

One that I particularly liked, and am toying with in my head, is putting a strip of a different fabric between the two halves of the backing fabric(s) to create a stripe. Since this is the back of a lattice quilt with a black background, I was thinking it might even look good to make a kind of offset + with black strips... but that will require a trip to buy more black fabric.

About the only things the methods seem to agree on is that you need a 1/2" seam that is pressed open, and that the selvage should be cut off.

Putting a design element on the back sounds really nice. It doesn't necessarily need to be black - you could use a solid or print of any color at all and you'd have a reversible quilt. Pictures! We want pictures!

On the back you can put some of your left over fabric from the front, even some of the squares, strips, whatever. I had a back that wasn't big enough, so I just cut it into 4 pieces - not the same size, added some squares (made to look like a race track) and sewed it up. It turned out pretty nice! If you can, use what you have.

I use scraps for the back. Like this:
[ATTACH=CONFIG]433201[/ATTACH]

Or if I don't want it so scrappy, I'll do it like this:
[ATTACH=CONFIG]433202[/ATTACH]

My sister always told me not to run the seam down the middle of the back. I don't know why, but I've followed her advice. I, also am creative with my backings. I usually add different fabrics together for the backing and like what it looks like.

I think the seam down the middle is only a bad idea if you are sending it to a long arm quilter....and then it is okay if the seam is horizontal rather than vertical. (loading the back to quilt on the long arm ...you don't want that vertical seam lapping over itself over and over.) If you are going to quilt it yourself, that seam down the middle is just a personal preference or not.

Welcome to the quilting world. Are you addicted yet?? It doesn't take long.

Dina

My absolute favorite method to "fill in" the back is to make extra blocks or use the blocks that aren't quite good enough for the back and run a strip of blocks down the back. (or across the back if it is better). I make 48 x 72 throws so, I only need about a block's width to add. If I don't have extra blocks, then I sew squares of the fabric from the front and use that. Of course, squares you could go 2, 3, 4 or more to add width.

In my earlier googling I read this was because some people believed that if the seam was in a fold line the quilt would wear out faster, but not sure if that is true or not.

I don't have any of the front fabric left over because it was done with a jelly roll. I am trying to decide if I want to just do the one fabric (pictured below) for the backing, or if I can be patient enough to go get more black fabric and add a design element. I was playing with meandering FMQ for the first time yesterday and now I am excited and ready to start trying it on this quilt. (off topic question... black thread or dark grey thread for the meandering stitch? opinions? hubby says black, but I am not positive)

Was asked for pictures...

Quilt top:
[ATTACH=CONFIG]433206[/ATTACH]

Fabric I chose for the back: (can't really see the detail here, but the color is true)
[ATTACH=CONFIG]433207[/ATTACH]

A picture of back fabric detail: (colors not true)
[ATTACH=CONFIG]433212[/ATTACH]

That sounds awesome, I will keep that in mind for my next quilts. I have two lined up: Yellow Brick Road and Hopscotch. I am thinking that would look great with the Yellow Brick Road, and I am thinking maybe a few scattered or spaced blocks for the Hopscotch.

Both of those are awesome. The second one is what I was talking about with the stripe of a contrasting fabric, I really like that method. I was thinking of doing something similar with this one. Where you have your block with the tag, I was thinking I could put another vertical stripe to make an offset + with black fabric. I am just worried I won't get it straight and it will bother me forever (as in the whole back, not the stripes).

If I am making a full size quilt, I put the seam down the middle of the back. If I making a queen or king, I put a width of fabric down the middle and a seam on each side.

I like backings with interest and life to them, so to me that's a perfect one!

As for the thread ... audition them, just as you do with fabrics.

An easy way to do it is to pull off a few yards of the thread, and let it fall onto the quilt, much like the quilting lines would be. Stand back and take a look. Black or Grey as you are already considering ... I would even try the same colour as your backing. And for more interest ... look at variegated threads ... grey/black ... and you might even find one that mixes in some of that turquoise of the backing.

It's a beautiful quilt!

romille, that is a spectacular quilt! Where did you get the pattern???

Thanks :) It is Sheri Pape's Basket Lattice quilt. It is excellently done with full color pictures to show you how to piece things together.

I got it from a local shop, but I have seen it several places online as well. So just check your favorite shops or google around for it. This is the website for it: http://sheripapedesigns.com which is pretty much just an image of the outer page of the pattern, so you will know you have the right one when you find it (you'll only see the right side if your looking online, the printed page is folded so the left side is the back of package).