|
From the images that came up on Google, it looks like it's a side-loading machine, which usually means the needle goes in side-ways. That would make a huge difference, to have the needle in the right way. The older machines are really sturdy, but your sewing machine mechanic might charge up to $100 to service it. It shouldn't cost anything for your mechanic to give you an estimate. I wouldn't put more than $80 into it. Does the foot control work? Just to replace that would add another $35 or more.
|
Bartack, The setscrew may be in the bottom of your machine. It is very tiny. Look for it and if you find it, put it back in the stud inside the machine. It will tighten up the stud. If it is gone, that is your problem. Be careful with the stud. I have been hunting one, and can't find one.
|
"Get rid of it. Old appliances are covered in lead paint."
In response I do not lick my sewing machine :) |
Looking for manual for a Nelco B-250-B-3
Originally Posted by Joyce123
(Post 5674064)
Hi: Just seen your question about a Nelco Sewing Machine. I have one that I have used since 1965. I purchased it in 1965. This machine is a sister to the Necchi Sewing Machine, which is a very expensive sewing machine. I used it so much that about 20 years ago I purchased a new motor for it. They are located in New York. I can't begin to tell you how much I have used this machine. I have made so many pairs of drapes, awnings, boat covers, dresses, costumes for boy scouts you name it this machine has done it. This machine cost more back in 1965 than the cheaper machines cost now. It is well made and whatever it needs fix it. You can't possibly buy a machine made today that will be the work horse that one is. If you need the manual I still have mine, however that machine is so easy to use.
Good luck. Joyce I am looking for a manual for a Nelco N-250-B-3. Yours wouldn't happen to be that model would it? Can't even find one to buy, one similar, but not quite correct. Jan |
Originally Posted by sewwhat85
(Post 7045649)
"Get rid of it. Old appliances are covered in lead paint."
In response I do not lick my sewing machine :) |
Originally Posted by HeatherSyl
(Post 6264625)
Get rid of it. Old appliances are covered in lead paint.
|
I had a Nelco for years and used it a lot, but it was not my favorite machine and I did have tension problems and had to have it adjusted regularly. It had trouble sewing through anything but reg. weight fabric. Skipped stitches with very light weight or heavier fabric. Wish I had gotten rid of it sooner. I would not recommend it. I now have an old Bernina 930 and only have it serviced to keep it clean so it will have a long life. I LOVE it. It never misses a stitch no matter what I'm sewing and I'm determined it will live as long as I do. Thus my yearly visits for cleaning and oil. (I'm turning 56 tomorrow. So we should have many more happy years of sewing together.) You'll spend more on an old Bernina, but you will have a workhorse of a machine.
|
I have a nelco from the 60's and several of the 'sister' machines from the same manufacturer under other labels. All are workhorses, extremely reliable and have required nothing but oil and grease and the occasional cleaning to keep plowing through everything from lawn to leather.
|
Originally Posted by HeatherSyl
(Post 6264625)
Get rid of it. Old appliances are covered in lead paint.
|
Hello, All! My son just gave me a Nelco Model 210 that he found, which I am quickly learning to love. I have had an alterations business for the last 21 years, and I quilt and do many different kinds of sewing for my own pleasure. Because of that, I recognize and appreciate a good sewing machine when I see one. Almost all of my machines are Singers that date before the fifties. But I admit that I know nothing about Nelcos, nor do I remember ever hearing about them. If anyone could tell me about their experiences with Nelcos, I would be grateful! Thanks!
|
| All times are GMT -8. The time now is 03:19 PM. |