|
Back to Sewing
2 Attachment(s)
I found my interest in quilting on a visit to the US....that's when I found and joined this group. It's been a long lull since then. Went back to work and life took over. Now I am back in Canada, and my interest has sparked again.
Enthusiastically made this Table runner....and I am truly humbled by the amount of work that goes into piecing! I ironed, measured, cut, sewed, squared Yet I can see imperfections. I have lost some of the Star leg points. though I did have scant 1/4th" margins. What should I do to avoid losing the points in future? Also , This is the 1st time I have used batting. Q. Do I have to use another sewing Foot when stitching through Batting or is the regular foot good enough? Would be grateful for any advice or suggestions. |
Welcome to the forum. Your work is very sharp and detailed and beautiful. Don't fret over it but enjoy your own work. You did very well. points will come in time. If you have been careful with your measurements and cutting and 1/4 inch seams, things will begin to fall in place with practice. So far, so good.
|
Pay attention to the direction you are pressing the star points. Yes it does make a difference which way the seams are pressed. Usually, the pattern will show little arrows to press in in that direction. Make sure you press, not scrub iron while pressing. That can distort the seam because it is on the diagonal it is bias. Bias is very easy to press out of shape. You see?
|
Lovely runner! Cut and sew as accurately as you can and you will get better the more time you invest in quilting. In the meantime, enjoy the process . You can quilt using your regular foot but a walking foot does make it easier. If you are stitching in the ditch on your runner, lengthen the stitch length a bit and quilt from the middle out. Starting to quilt in the centre and working to the edge helps to move any extra fabric out to the edge so you don’t get wrinkles in the back.
|
Originally Posted by RedGarnet222
(Post 8533220)
Pay attention to the direction you are pressing the star points. Yes it does make a difference which way the seams are pressed. Usually, the pattern will show little arrows to press in in that direction. Make sure you press, not scrub iron while pressing. That can distort the seam because it is on the diagonal it is bias. Bias is very easy to press out of shape. You see?
|
Originally Posted by Tartan
(Post 8533225)
Lovely runner! Cut and sew as accurately as you can and you will get better the more time you invest in quilting. In the meantime, enjoy the process . You can quilt using your regular foot but a walking foot does make it easier. If you are stitching in the ditch on your runner, lengthen the stitch length a bit and quilt from the middle out. Starting to quilt in the centre and working to the edge helps to move any extra fabric out to the edge so you don’t get wrinkles in the back.
It's quite exciting for me . |
Originally Posted by Quiltwoman44
(Post 8533209)
Welcome to the forum. Your work is very sharp and detailed and beautiful. Don't fret over it but enjoy your own work. You did very well. points will come in time. If you have been careful with your measurements and cutting and 1/4 inch seams, things will begin to fall in place with practice. So far, so good.
|
That's a great execution for a short time quilter. My quilting group meets together to sew and we help each other on learning.
|
Love your table runner. Just a thought, but could your scant seams be too scant? Perhaps if you made them the full 1/4" you would have enough room on the ends of the star points so they will not be cut off.
|
Starch is your friend, especially when sewing cross grain. I buy regular corn starch, make my own. This will help stiffen your fabric and you'll see much straighter blocks. As others stated, ac walking foot, to me, is a must when machine quilting.
|
| All times are GMT -8. The time now is 10:34 PM. |