|
Thank you all for your help & suggestions. I'm going to check into every suggestion made & hopefully 1 or the other will solve the problem. I think that my problem may just be a combination of all of the above, tension too tight, because I do get "eyelashes", but only on 1 machine. The other 2 that I've used at other times, do fine. Even my old antique Kenmore makes beautiful stitches. Lots of fuzzies from the Walmart threads on my Viking, but not so much on my Kenmore or Elna. All have the little white "Bobbin Genie" in them for easier thread flow too. Hmmm.... If I do a straight stitch & usually set it at the "stretch stitch" setting when quilting. As for Batting, I use the Warm & Natural & if I want a little more "POOF", I double it, But I stay away from cheap brands so won't get too many fuzzies in my sewing machine.
|
P.S. I don't want to be a "THREAD SNOB" either, so I have tried Superior & Aurifil. Love them both. A little pricy, but I guess I'll have to invest so no more broken threads & ruined quilts. Never used Serger threads for quilting, no matter how tempting it is.
*** 2 more questions for you all experienced quilters?*** To prewash or not prewash quilting fabric, if not prewashed, could that be why threads are breaking? |
The quilts that I've made using the cotton-covered Coats & Clark Dual Duty threads are still going strong - after many years and many washings!
Maybe it's because I bought the Coats & Clark threads at someplace other than WalMart? (I am very sure that any C&C thread purchased at WalMart is equal to any C&C thread purchased elsewhere - just in case someone might think that C&C thread sold by WalMart is inferior to the C&C thread sold at JoAnn's) When I did have threads 'pop' - it was because the tensions on the machine had gotten way off. When one thread is laying totally on the surface, there is no 'give' in that thread - so any stress -especially on/in a seam sewn on the bias - that will cause breakage. After I noticed that issue - I did the seams over after I got the tensions adjusted properly. A thread that is almost 'floating' is quite easy to pull out. |
Originally Posted by bearisgray
(Post 6096209)
I am very sure that any C&C thread purchased at WalMart is equal to any C&C thread purchased elsewhere - just in case someone might think that C&C thread sold by WalMart is inferior to the C&C thread sold at JoAnn's.
|
Originally Posted by VIKINGQUEEN
(Post 6096125)
To prewash or not prewash quilting fabric, if not prewashed, could that be why threads are breaking?
|
So can you please tell me what IS the correct size needle, thread, etc, when quilting, free motion or straight stitch? I have alot of needles, Top Stitching, Quilting, etc, all Schmetz. No Skimping there! But when it comes to quilting, I just can't seem to get it right. My stitching to make the quilt itself are all good.
**To Bearisgray** You made a very good observation. I have always had very tight stitches, straight or otherwise. It was just recently, that I noticed just how tight they were, when I had to tear something out & the stitches were so tight that my smallest seam ripper could not get underneath the stitches to rip them out. *** My favorite sewing machine & most user friendly that I have is a Husqvarna Viking Desinger SE. My other 2 favorite machines for just piecing or sample stitching are my Kenmore & my little ELNA 1010, both very friendly & uncomplicated , non-computerized sewing machines, which make perfect stiches, especially free motion quilting, but too small to quilt large quilts. |
Originally Posted by VIKINGQUEEN
(Post 6097794)
I had to tear something out & the stitches were so tight that my smallest seam ripper could not get underneath the stitches to rip them out.
That right there is probably your number one problem. The stitches should NOT be that tight.
Originally Posted by VIKINGQUEEN
(Post 6097794)
So can you please tell me what IS the correct size needle, thread, etc, when quilting, free motion or straight stitch?
You can find tons of useful information at Superior Threads website. http://www.superiorthreads.com/educa...e-right-needle http://www.superiorthreads.com/media...tion_Guide.pdf |
Thank you so much! Have a Tearr-rrific weekend! LOL!
|
| All times are GMT -8. The time now is 11:45 PM. |