Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Main (https://www.quiltingboard.com/main-f1/)
-   -   Complaint About Me (https://www.quiltingboard.com/main-f1/complaint-about-me-t71024.html)

winia 10-19-2010 06:14 AM

Why is it when I have everything lined up, a foot that has markings on it that I follow rather than the needle I still can't sew in a straight line? What is wrong with me? It's extremely annoying.

sandpat 10-19-2010 06:15 AM

Have you tried uncrossing your eyes???? (just kidding...)

I have the same trouble, so don't feel like you are alone. It does seem to help when I slow down though.

debbieumphress 10-19-2010 06:16 AM

JOin the party. Maybe better glasses? If you find the mark you want to sew on, I will put some blue painters tape down so it is straight, then another on top of it and maybe a third. It makes it thicker so you can pratically line the fabric up with the tape and feel the border. Might help you too.

Holice 10-19-2010 06:16 AM

put some painters tape down the front of the foot onto the arm of the machine and table (if necessry) to help you guide. This helps keep it straight going under the foot.

ktbb 10-19-2010 06:40 AM

staring at the needle or even at a foot close to the needle tends to result in crooked lines.....try marking the base of the machine a couple of inches ahead of your needle and use that as your guide for the edge of your fabric and see if it helps...If us use that as your primary check, you can spot check periodically to see that the edge of the fabric hear the needle is where you want it to be.

Think of driving down the road and focusing on a spot just ahead of your hood...you end up (usually) over compensating and the car moves back and forth a lot, even tho it may be small moves. If you focus on the road several yards ahead of the car, your turns are less jerky, the ride is smoother, and the path of the car is a straighter line.

sewTinker 10-19-2010 07:09 AM


Originally Posted by ktbb
staring at the needle or even at a foot close to the needle tends to result in crooked lines.....try marking the base of the machine a couple of inches ahead of your needle and use that as your guide for the edge of your fabric and see if it helps...If us use that as your primary check, you can spot check periodically to see that the edge of the fabric hear the needle is where you want it to be.

Think of driving down the road and focusing on a spot just ahead of your hood...you end up (usually) over compensating and the car moves back and forth a lot, even tho it may be small moves. If you focus on the road several yards ahead of the car, your turns are less jerky, the ride is smoother, and the path of the car is a straighter line.

I love this advice! From now on, I'll be driving my Machine down painter's tape alley. Thank you for the vivid imagery.

ckcowl 10-19-2010 07:15 AM

one way that helped me start sewing straighter was to take a moment and draw the seam lines on my fabric with a pencil, it only takes a moment and makes a huge difference. i don't have to anymore, somehow just doing it for a couple projects helped me get the hang of keeping everything straight. i still always draw the lines for hand piecing but sew nice and straight with the machine now.

Ripped on Scotch 10-19-2010 08:35 AM

I have found that if I line myself up with the center of the needle and not the center of the machine I sew a much straighter line.

Jan in VA 10-19-2010 09:03 AM


Originally Posted by ktbb
staring at the needle or even at a foot close to the needle tends to result in crooked lines.....try marking the base of the machine a couple of inches ahead of your needle and use that as your guide for the edge of your fabric and see if it helps...If us use that as your primary check, you can spot check periodically to see that the edge of the fabric hear the needle is where you want it to be.

Think of driving down the road and focusing on a spot just ahead of your hood...you end up (usually) over compensating and the car moves back and forth a lot, even tho it may be small moves. If you focus on the road several yards ahead of the car, your turns are less jerky, the ride is smoother, and the path of the car is a straighter line.

I'd like to expand on this and suggest placing a FULL small Post-it note (glued edge of notes) smack up against the right side of your presser foot with the majority of it extending in front of the foot. Then the front edge of the Post-it note becomes your eyeball site, and the raised edge of the note becomes your guide to keep the fabric aligned.

Two issues, the sticky back on the Post-it Note does NOT adhere to most throat plates more than a minute -- I use a fat, thick rubber band around the free-arm portion of MY Bernina 1031 to hold it in place. Or a long piece of scotch tape. Both are easily repositioned for changing bobbins or sewing other seams.

Also, if your feed dogs extend outside the width of your presser foot, this technique becomes more difficult. Try learning to sew with a changed needle position to create your 1/4" seam allowance.

This little tip has saved me literally countless hours of pokey driving like a little old lady eyeballing right off the hood of her car! I now sew a perfectly straight seam with the pedal to the metal!

Jan in VA

franie 10-19-2010 09:13 AM

I "wave" sometimes too! I usually fix it. Watch out for leaning left or right at the end of a seam.


All times are GMT -8. The time now is 03:52 AM.