Do we have a tutorial here for using Elmer's Glue to sandwich a quilt?
Hint hint, I have two quilts ready to sandwich and am truly a visual learner. So was hoping something would be posted before I attempt this.
Thanks for thehelp. |
It's a video by Sharon Schamber:
https://www.youtube.com/watch?v=a2hWQ5-ZccE |
Carslo, MTS gave you one for binding, but did you mean you're ready to baste it? Personally, I wouldn't use elmers for that.
Here is Sharon's method for basting that I use and I love it! It's the best method I've found and have never had a quilt shift or pucker doing them this way, and it goes much faster than you would think. No more clamping or taping to the floor for this girl. lol https://www.youtube.com/watch?v=bhwNylePFAA |
Originally Posted by sewobsessed1
(Post 5603598)
Carslo, MTS gave you one for binding,
I was started out looking for COYOTE's post, got distracted, and went for the binding link. Here's COYOTEMAGIC's explanatin of her Elmer's glue BASTING process: http://www.quiltingboard.com/main-f1...ml#post5022726 But you could use Sharon's method with the boards, and instead of thread basting or using 505 spray, use the Elmer's Glue instead. As I have around 10 cans of 505 here, until those are used up, I won't need to try it out myself. |
I have basted my last 5 quilts with Elmers School glue and LOVE IT!!!!!!!!!!!!!!!!!!!!!
I use my dinning room table to lay out my backing, batting and top. I pin down the center from left to right to give me a 'fold point'. I thin drizzle on my glue about 12-18" at a time, smooth down my top, and proceed on. Both my top and backing are as soon as glass when I am done. I do NOT get any puckers any where at all. I usually allow the glue to dry 24 hours as I don't want to be bothered with the iron, and then FMQ the top. I do not get any build up on my needle, I do not encounter any 'bumps' that are hard to stitch on.....and everything stays in perfect place during quilting NOTHING MOVES at all.....Glue is super cheap at like $1.25 for a good size bottle and you can do 1-3 quilts per bottle, pending quilt size. I do not have to worry about overspray or fumes in my house. I do have pictures taken to do a tute but have not taken the time to do so as everyone have been do critical of late here. |
I use Elmer's School Glue for my quilts the same way as Deborahlees. I hit it with iron when I am impatient, but that is just me. The last quilt I did I payed close attention to see if I got any puckers. There were none. My post is not a tutorial but if you would like to see the quilt, the post is called QB Scrap. Good luck!
http://www.quiltingboard.com/main-f1/qb-scrap-t203563.html |
Originally Posted by MTS
(Post 5603641)
Ha! So I did.
I was started out looking for COYOTE's post, got distracted, and went for the binding link. Here's COYOTEMAGIC's explanatin of her Elmer's glue BASTING process: http://www.quiltingboard.com/main-f1...ml#post5022726 But you could use Sharon's method with the boards, and instead of thread basting or using 505 spray, use the Elmer's Glue instead. As I have around 10 cans of 505 here, until those are used up, I won't need to try it out myself. |
Originally Posted by Deborahlees
(Post 5603755)
I have basted my last 5 quilts with Elmers School glue and LOVE IT!!!!!!!!!!!!!!!!!!!!!
I use my dinning room table to lay out my backing, batting and top. I pin down the center from left to right to give me a 'fold point'. I thin drizzle on my glue about 12-18" at a time, smooth down my top, and proceed on. Both my top and backing are as soon as glass when I am done. I do NOT get any puckers any where at all. I usually allow the glue to dry 24 hours as I don't want to be bothered with the iron, and then FMQ the top. I do not get any build up on my needle, I do not encounter any 'bumps' that are hard to stitch on.....and everything stays in perfect place during quilting NOTHING MOVES at all.....Glue is super cheap at like $1.25 for a good size bottle and you can do 1-3 quilts per bottle, pending quilt size. I do not have to worry about overspray or fumes in my house. I do have pictures taken to do a tute but have not taken the time to do so as everyone have been do critical of late here. |
Yes pplease! Do a tutorial on this method. I am sure that many of us are interested and just need a bit of help visually to try it. I am sorry that some folks are being nay sayers but maybe of us want to say "yeah" it works :)
Originally Posted by Deborahlees
(Post 5603755)
I have basted my last 5 quilts with Elmers School glue and LOVE IT!!!!!!!!!!!!!!!!!!!!!
I use my dinning room table to lay out my backing, batting and top. I pin down the center from left to right to give me a 'fold point'. I thin drizzle on my glue about 12-18" at a time, smooth down my top, and proceed on. Both my top and backing are as soon as glass when I am done. I do NOT get any puckers any where at all. I usually allow the glue to dry 24 hours as I don't want to be bothered with the iron, and then FMQ the top. I do not get any build up on my needle, I do not encounter any 'bumps' that are hard to stitch on.....and everything stays in perfect place during quilting NOTHING MOVES at all.....Glue is super cheap at like $1.25 for a good size bottle and you can do 1-3 quilts per bottle, pending quilt size. I do not have to worry about overspray or fumes in my house. I do have pictures taken to do a tute but have not taken the time to do so as everyone have been do critical of late here. |
Originally Posted by Deborahlees
(Post 5603755)
I have basted my last 5 quilts with Elmers School glue and LOVE IT!!!!!!!!!!!!!!!!!!!!!
I use my dinning room table to lay out my backing, batting and top. I pin down the center from left to right to give me a 'fold point'. I thin drizzle on my glue about 12-18" at a time, smooth down my top, and proceed on. Both my top and backing are as soon as glass when I am done. I do NOT get any puckers any where at all. I usually allow the glue to dry 24 hours as I don't want to be bothered with the iron, and then FMQ the top. I do not get any build up on my needle, I do not encounter any 'bumps' that are hard to stitch on.....and everything stays in perfect place during quilting NOTHING MOVES at all.....Glue is super cheap at like $1.25 for a good size bottle and you can do 1-3 quilts per bottle, pending quilt size. I do not have to worry about overspray or fumes in my house. I do have pictures taken to do a tute but have not taken the time to do so as everyone have been do critical of late here. |
All times are GMT -8. The time now is 08:36 PM. |