As a relatively new quilter, I have only done straight line quilts. If I were to take a curved pattern and enlarge it on a copier, would the pieces still fit together? It would seem if everything were exactly 33 or 50% larger the curves would stay at the same amount of curvature and still fit together - just bigger. Any thoughts?

sounds reasonable to me....

Yes, it will work perfectly....

Just remember to resize/trim the seam allowances as those will also be enlarged (if your original shape/pattern already included them).

Sounds good

Ok, I don't understand this part. All of the patterns I have used so far have indicated they have allowed for a 1/4 inch seam allowance. Why would making everything else larger increase the seam allowance? And, what would it increase to?

if you have a friend that has EQ and its a stock quilt square, they can resize it for you...

Let's say you have an 6" FINISHED circle that you want to enlarge to 12".

If your template already has the 1/2" included on the pattern template, that means you've started with a 6.5" diameter circle, correct?

So you go to the copier and enlarge it, using 200% (to double the size)**.

How big does your new larger circle measure?

13". Because you double the size of the template which included the seam allowance - 6.5" double =13".

And there's nothing wrong with that except you wanted a 12" circle, which meant the diameter should now be 12.5".

A couple of ways around this:
If the template has the line drawn for the seam allowance, then once you enlarge the piece you just trim down the seam allowance to 1/4".

If the template does NOT have a seam allowance, then you still enlarge it 200%, and THEN add the 1/4" seam allowance to the paper before you cut it out (if you work that way), or don't add it to the paper, but add it when you're cutting the template from the fabric.

Or, if there is a seam allowance, you can remove it before enlarging the shape, and then it back on (if you need it).

Seam allowance or no - depends if you're doing fusible, needleturn, machine applique, freezer paper.

Make sense? Or did I confuse you more?

eta: **depends on the settings of your copier.

thanks

Are you talking about increasing a block size or are you talking about doing the actual `quilting` on the finished quilt?