My best machine just began pulling the top thread through to the internal bobbin mechanism and 'hanging up'. I oil her and keep her lint free. I use good thread that she has always loved (Gutterman). I feel like it may be a tension problem, but tried to adjust. The top stitch is not her familiar quality, but she works for a while and then the top thread gets stuck in the internal bobbin mechanism. Please help. I am in the middle of piecing for a class.
|
If you haven't already done so, rethread her top and bottom.
|
Change the needle....
|
try a different bobbin
|
Will change needle and bobbin this morning! Thank you. Have re-threaded a few times and it made her sew somewhat better. I am wondering about tension.
|
Could be a bad needle. I would do as they say, change needle and bobbin. Then rethread. Make sure the upper tension is not too loose.
|
Take the bobbin out and turn the machine over...sounds like something is stuck down in the bobbin assembly area...even 1 tiny thread will do that. Also do what the others said...new needle, etc.
|
Good luck
|
|
Thanks everyone. I used several suggestions and she is sewing like a dream!
|
All times are GMT -8. The time now is 12:50 PM. |