Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Main (https://www.quiltingboard.com/main-f1/)
-   -   Fleece Backing on Long Arm ? (https://www.quiltingboard.com/main-f1/fleece-backing-long-arm-t150204.html)

rashley 09-03-2011 04:41 PM

I would like to use a fleece backing on a quilt using my long arm machine. Has anyone used fleece with a long arm before? Any advice on doing so?

Thanks !

ube quilting 09-03-2011 04:47 PM

I don't know how this would work. Fleece is very very very linty and will clog the bobbin and case and the enternal gears. I'm not sure I would try it. LAMs are very expensive to fix.

Grannymom 09-03-2011 04:50 PM

I tried it - on my particular setup (Bailey), I had a lot of broken thread - finally gave up

cjsparks 09-03-2011 04:52 PM

You might want to do a test sandwich.

Elise1 09-03-2011 04:56 PM

I used fleece backing on a Gammill long arm. There were a few broken threads, but I thought it came out just fine.

Elise

Selena 09-03-2011 06:38 PM

I did two full sized ones on my Voyager 17 and had no problems at all. Just don't over-stretch the fleece or you'll have a wonky quilt. I also vacuum out the bobbin area before I put in a new bobbin every time but I do that anyway.

Shelley 09-03-2011 06:41 PM

It's possible to do. If you are cleaning and oiling your LA every time you change bobbins you should be fine.

wesing 09-03-2011 07:05 PM

If you're talking about the polyester fleece I say go for it! We did a quilt for my FIL with a fleece back and it quilted beautifully, and there was almost no lint. Check my posts for Pop-Pop's quilt to see the finished quilt.

Darren

Anna.425 09-03-2011 07:42 PM

Definatly run a test first. Fleece also stretches a ton and that may be an issue with the tension of the fabric.

quilticing 09-04-2011 03:29 AM

I do it with the stretch going horizontal and use lightweight clamps. Minkee, too.

suemac54 09-04-2011 10:16 AM

We have done fleece backing on our Gammill with no problem

Jennie and Me 09-04-2011 12:16 PM

Love the fleece and Minkee on the backs of quilts. Just make sure that you don't stretch the backing. Works great with my APQS machine.

ckcowl 09-04-2011 12:21 PM

i've used fleece on the backs of many quilts - quilted on the long arm-
they stitch up beautifully!
the one thing to keep in mind is the stretch of the fleece- one way stretches more than the other- figure out which way is which-
and do not stretch it as you roll it up-simply smooth it.
i've done them with batting- without batting- with pieced fleece/minkie
just becareful of the stretch- use a larger needle- longer stitch length- and have fun with it- the kids in my family request fleece backed quilts all the time- they are called the 'get-naked' blankets! they love to wrap in them after their showers :)


All times are GMT -8. The time now is 08:56 AM.