HELP, the ink washed out of my label!
 

I just made my first label on my printer with freezer paper. Just washed the quilt, and the writing was gone! Has that happened to any of you?

I guess I will write on it with pigma pen....does that wash out??

I am supposed to be gifting it to someone today.

I've never tried with a printer before. I've only ever used pens. Just make sure that your label material is clean. I put a drop or two of dishwashing soap on it and wash it in the sink and then throw it in the dryer. Then apply your freezer paper and write the label. Make sure to set the ink with a hot, dry iron and it should be fine.

Sorry that happened. I would just use a pigma pen and rewrite the label

I just used a permanent sharpie and heat set it, which is what I usually do. My pigma pen is way way too fine. Oh well. I figured I would try something new.

I used to hand stitch my labels....I would put my first initial, last name, and the year...they were nice, but a bit time consuming. Thanks.

There is a product called "bubble jet set" that is supposed to make your printer in permanent, maybe try that next time, or use the pre treated fabric sheets. I didn't think printer ink was permanent unless treated first.

micron pigma pens are permenent- archival quality, acid free-- do not fade, or bleed-no fuzzy edges.
as for your label---
did you let it cure? then heat set it? then rinse it in cool water?
was the fabric prepared for dyeing?
do you have good ink (sorry it takes the expensive stuff) in your printer?there is permenent inks- and there are water soluble inks-
the inexpensive, re-fillable cartridges the ink will wash out every time-

Yes that happend to me use my other printer (diff. Ink) and it stay in there.

Great info...thanks!

I have to agree with Woody. If you are using your own fabric, and not the sheets made for printing you need to chemically treat the fabric with bubble jet set.

Also, make sure the ink in your printer is pigment not dye based. I found out the hard way that dye based inks are not color fast. I bought a Kodak printer and found out I can't use it for fabric. I've heard HP, Brother and Cannon are the three best companies for printers that work on fabrics.

Micron Pigma pens stay. i do heat set with the iron a few seconds though. if you can't write on your label, you could hand embrioder on it instead.

Thanks for all the info concerning the printer, ink, fabric,etc.. I will have to check out the details of my printer.

If I use my printer to make labels, I have to just use black ink. The color ink washes out but not the black.

Ohhhh! At first I made my label with black ink, I heat set it , got it wet just to make sure it would stay. Then I decided to do it in color and did not bother to check it. Thankfully I washed the quilt after I sewed it on, only to find theh ink wash out. I wrote on it with a permanent sharpie. I will be experimenting with my printer.