Last night I was working on a table runner and I had to take the needle plate off to see why the thread was sticking. I took the bobbin case out and now I have an "L" shaped piece left over when I put it back together. Can someone with a Sapphire 875 take the needle plate off and bobbin case out and show me what the bobbin case area looks like?
|
3 Attachment(s)
I have the same machine - here are some pics - hope this helps. If not send me a message and we can work it out. Ok - here goes...
Teresa this is the bare bones. [ATTACH=CONFIG]82746[/ATTACH] with bobbin case in [ATTACH=CONFIG]82818[/ATTACH] these are the pieces removed [ATTACH=CONFIG]82819[/ATTACH] |
THANK YOU!!!!!!!!!!!!! I found where the piece goes . . . I really appreciate your help, now I don't have to drive 50 miles for a simple solutionE!
|
Originally Posted by 0tis
I have the same machine - here are some pics - hope this helps. If not send me a message and we can work it out. Ok - here goes...
Teresa |
I have the 835 and i had the exact same problem first time i took out the bobbin case!
|
All times are GMT -8. The time now is 07:48 PM. |