|
How do I cut the backround fabric?
1 Attachment(s)
I saw this tree skirt on Pinterest that a lady had designed herself. I would love to make a similar one for our smaller fiberoptic tree. It only has to be about 18" - 20" across. I have the 8 trees made but for the life of me I cannot get the correct octagon shape. The trees are 4" across the bottom & 5" high. Any suggestions on how to cut the white background?[ATTACH=CONFIG]372946[/ATTACH]
|
Looks like it's 8 triangles. How about deciding on the size of the white triangles and then appliquéing the trees on them.
|
looks like the trunks are made with white on either side then tree the same way then sew trunk section to tree section then i would trim the unit to the size triangle you want...its super cute...may have to make one
|
A full circle is 360°
With 8 pies sections (trees), each needs to be 45° degrees. Therefore, IF each tree is 45°, they will go together to make a full circle. Looking at the photo, each tree was made, then the trunk and white at the bottom was added. Then a strip of white on one side, then the other side. And back and forth til each piece of pie is to size. The more white that's added, the bigger the circle will become. Join the pieces of the pie together, leaving one open for your skirt opening. If it were me, and it were for a novelty tree, I'd sew the eighth section from the outside in to the centre and leave just enough opening to feed the bottom of the tree thru. Would give a much neater and tidier look for oohing and aahing! :) |
QuiltE is right - you need a 45 degrees angle at the top of your tree. Based on your measurements, the tree is close, but not quilt 45 (It's 47 degrees). If you already have the tree on the white background. cut one edge of the white parallel with your tree. Then, lay the 45 degree line of your ruler along that cut, and trim the other edge to get a perfect 45 degrees.
|
I would get a huge piece of paper (wrapping paper). I would make sure it is square. Then fold it in half, fold in half again and half again to form a triangle. Unfold it and it should have eight crease marks dividing the paper into 8 equal sections. Measure out with a ruler from the center point the required distance for your triangle and mark a dot. Draw straight lines from dot to dots and you should have an octagon. Cut out a section for your cutting template but make sure to add your seam allowance.
|
Originally Posted by QuiltE
(Post 5618120)
Therefore, IF each tree is 45°, they will go together to make a full circle.
Originally Posted by QuiltE
(Post 5618120)
......Then a strip of white on one side, then the other side.
And back and forth til each piece of pie is to size. The more white that's added, the bigger the circle will become......
Originally Posted by QuiltE
(Post 5618120)
If it were me, and it were for a novelty tree as you are, I'd sew the eighth section from the outside in to the centre and leave just enough opening to feed the bottom of the tree thru. Would give a much neater and tidier look for oohing and aahing! :)
|
Seeing that it is only 18-20" across I can think of 2 different ways to add the white.
Use 8 - 45 degree triangles and applique the small trees onto those pieces. Or just cut an octogon [8 sided] piece of your white background. The applique the trees at the bottom of each side. Let the quilting do the rest to make it look like 8 triangles sewed together. ali |
Thank you all for your advice. I have to put this project on hold for awhile. We are leaving for AZ on Tuesday so it is time to pack. I will post pics of the finished skirt probably next weekend.
|
Love the pattern. Give us a tute when you are finished.
|
| All times are GMT -8. The time now is 01:17 AM. |