Leveling a studio 2 from from HQ
 

i was wondering if someone could explain how I level my frame. I asked my representative and he told me. I need to get on my hands and knees and turn a screw with the special screw driver. My question? which screw driver and what screws needs to be turned , another words, where exactly is the screw located. My machine drifts forwards. Any help and pics would be perfect. Thank-you in advance.

There is a tiny section in this video , at 17.10 on how to level the frame.

https://www.youtube.com/watch?v=DQkvi_EKMI8

The flat wrench in the video is the correct tool to use. The nut that you adjust is just above each foot, and there are 8 of them. To lower the frame, you'd turn it to the left. Usually to tighten is "righty-tighty," but you are looking at it from the top, not from the bottom. To raise the frame, you'd turn to the right. Here's a picture.

Thank- you both, i’ll Try and work on it later tonight.

Thank-you for the information. I got on my hands and knees and tighten the screws and my table is leveled. Thank-you.
happylab,

Yay! Now you can get some quilting done. Have fun quilting!