Looking for some direction for tuning up a basic Kenmore
Hello; I would like to revive my first sewing machine it is a Kenmore front loading bobbin 8 stitch, which I bought new about 20 ish years ago. It was a good basic machine, that got a fair amount of abuse. It has been shelved for 10 years or so waiting for someone to fix it. It has been oiled, and all the dirt etc cleaned up. The wheel moves freely when you use the foot pedal and sounds good but when you hand crank there is resistance but no sticking, when the needle is at the highest and lowest part of the rotation. The bigger issue it the top thread gets caught by the hook and is pulled down the side of the bobbin but then does not come off the hook to move over to the right side of the bobbin and then back up to catch the bobbin thread and up and out the hole of the needle plate. I did have to adjust the timing as initially the thread was not getting caught by the hook, I have changed my needle and it only goes in one way so I know its correct. The tension feels good on both top and bottom. Is it possible that the hook is not being rotated enough is that even a possibility?? What could be the cause of the top thread not following all the way around the bobbin and back out? I am trying to do this myself, it wouldn't be worth the cost of taking it into a repair shop. Thanks for any input
|
You will get lots of info by posting here on the Forum thread called For Vintage & Antique Machine Enthusiasts.
Click above on Forum and the Discussion section will come up. They will be very helpful. |
Here's the link:
http://www.quiltingboard.com/vintage...thusiasts-f22/ |
is the needle the correct size?
|
Originally Posted by frogged
(Post 7616624)
Hello; I would like to revive my first sewing machine it is a Kenmore front loading bobbin 8 stitch, which I bought new about 20 ish years ago. It was a good basic machine, that got a fair amount of abuse. It has been shelved for 10 years or so waiting for someone to fix it. It has been oiled, and all the dirt etc cleaned up. The wheel moves freely when you use the foot pedal and sounds good but when you hand crank there is resistance but no sticking, when the needle is at the highest and lowest part of the rotation. The bigger issue it the top thread gets caught by the hook and is pulled down the side of the bobbin but then does not come off the hook to move over to the right side of the bobbin and then back up to catch the bobbin thread and up and out the hole of the needle plate. I did have to adjust the timing as initially the thread was not getting caught by the hook, I have changed my needle and it only goes in one way so I know its correct. The tension feels good on both top and bottom. Is it possible that the hook is not being rotated enough is that even a possibility?? What could be the cause of the top thread not following all the way around the bobbin and back out? I am trying to do this myself, it wouldn't be worth the cost of taking it into a repair shop. Thanks for any input
|
All times are GMT -8. The time now is 01:10 AM. |