Originally Posted by pstoner
Originally Posted by retired2pa
I use Insulbrite from Joann's. It's very cheap and also a layer of cotton batting.
Here is the link to the Swap section. You'll see the thread for the pot holder swap in there. http://www.quiltingboard.com/s-11-1.htm |
Originally Posted by doowopddbop
Originally Posted by twinkie
Originally Posted by lynnie
hi dotty, i just made a bunch using 1 layer of otton and one layer of insulabrite
|
look on the swaps thing
not due for a while |
I've made a ton of these. I think I used 8' squares and folded my four squares in triangles instead of rectangles. I did not quilt them.
On some I did stitch all the way around the finished potholder, about 1/2" from the edge, but that is not necessary. They make great gifts. |
Originally Posted by Sallyjane
I've made a ton of these. I think I used 8' squares and folded my four squares in triangles instead of rectangles. I did not quilt them.
On some I did stitch all the way around the finished potholder, about 1/2" from the edge, but that is not necessary. They make great gifts. |
Originally Posted by mosaicthinking
I use woollen blanket offcuts from a local factory outlet. Works well I'm lucky in that I live in a country with lots of sheep :-)
|
I just made your cute potholder...Very good instructions with easy to follow pictures. I will definitely make more of these!
|
I wentto joann's they had some regular batting for potholders. I ask if it had to be doubled, and they said no. I have tried it and it really works.
|
Was it specific for potholders? What is the name of it, sounds interesting!
|
That lady at TJ Maxx, inspecting the potholder display, the fabric,the design, the construction... that was me! The Halloween kitchen towels were calling to me, but I managed to get out w grocery funds intact! I do hope my next Secret Pal really likes cute things...! TGIF to all
|
Originally Posted by Butterflyblue
hmm, I have some felted wool fabric leftover from another project - that might work nicely too.
:mrgreen: I'm planning to cut them up to line potholders. |
It is spacifacly made to reflect heat. I will have to ask the name of it next time I go to joann's. At the time I just ask them for some kind of batting that would work in potholders. She said that is what it was for. If I get a chance to drop into joann's I will find out and get back to you.
|
I have handmade potholder hot pad trivets for a couple years now mainly for sale. I used the InsulBrite insulating fabric from Walmart or JoAnne Fabrics. The shiny side would go towards your cotton print fabric. The otherside goes against the prequilted plain color fabric.
I used the pre-quilted fabric to follow the quilted lines on and to give the potholder an extra layer of batting as well. Many of my potholder hot pads are currently listed on Ebay. I did sell 8 sets of potholders to one buyer recently. Then I made more potholders so I would have a longer set of postings on Ebay. Hope this helps you out. from, Debbie, Phoenix, AZ. |
I use 2 layers of insulbrite and 2 layers of batting! I like a heavy duty pot holder. I was afraid that much would be too stiff, but once I quilt them, they are perfect!
|
Originally Posted by Deborah2009
I have handmade potholder hot pad trivets for a couple years now mainly for sale. I used the InsulBrite insulating fabric from Walmart or JoAnne Fabrics. The shiny side would go towards your cotton print fabric. The otherside goes against the prequilted plain color fabric.
I used the pre-quilted fabric to follow the quilted lines on and to give the potholder an extra layer of batting as well. Many of my potholder hot pads are currently listed on Ebay. I did sell 8 sets of potholders to one buyer recently. Then I made more potholders so I would have a longer set of postings on Ebay. Hope this helps you out. from, Debbie, Phoenix, AZ. |
I buy insulbrite at Hobby Lobby
|
Originally Posted by Yarn or Fabric
Are you talking about the one that is made like the criss cross coasters? http://www.youtube.com/watch?v=sipzCAflJQ8
I am thinking of trying those - but quilting them afterwards :) |
Originally Posted by NanSew
Originally Posted by Yarn or Fabric
Are you talking about the one that is made like the criss cross coasters? http://www.youtube.com/watch?v=sipzCAflJQ8
I am thinking of trying those - but quilting them afterwards :) 8-) |
Originally Posted by dotcomdtcm
Please tell me what materials you prefer, batting/insulated fabric, and where you buy it. One of my old books says to buy an ironing board cover & cut it up!! Thanks once again.
|
Make the first one for you!
|
Originally Posted by dotcomdtcm
Please tell me what materials you prefer, batting/insulated fabric, and where you buy it. One of my old books says to buy an ironing board cover & cut it up!! Thanks once again.
|
Originally Posted by Bev
Originally Posted by NanSew
Originally Posted by Yarn or Fabric
Are you talking about the one that is made like the criss cross coasters? http://www.youtube.com/watch?v=sipzCAflJQ8
I am thinking of trying those - but quilting them afterwards :) 8-) |
I use insulbrite and warm and natural batting, plus the top and the back. I make many of these for my family and friends. They say they love them!!
|
Originally Posted by Yarn or Fabric
Are you talking about the one that is made like the criss cross coasters? http://www.youtube.com/watch?v=sipzCAflJQ8
I am thinking of trying those - but quilting them afterwards :) |
Originally Posted by nativetexan
insul-brite and cotton batting.
|
The criss-cross pot holder looks like a coaster pattern I found on the internet - except the coaster was a smaller version. Very easy. I used batting and plastic inside for the coaster.
|
i get some from fabric.com and when i get a ride i go and i buy from joann,s but mosty on line
|
If it's just to use up a sample block I might just use left over batting. For mats for hot pots to rest on I would probably use an insulated product.
I can feed my addiction at the Fabric Depot here in Portland. (For those of you who are not from the Pacific NW...Fabric Depot is 1 1/2 acres of fabric, bridal, home dec, needle craft and more of heavenly things. They do have an on line site.) |
Originally Posted by NanSew
Originally Posted by Bev
Originally Posted by NanSew
Originally Posted by Yarn or Fabric
Are you talking about the one that is made like the criss cross coasters? http://www.youtube.com/watch?v=sipzCAflJQ8
I am thinking of trying those - but quilting them afterwards :) I'm gonna start on some tomorrow. Got the chores all out of the way today. Tomorrow is play day! I want to make a couple for every one of my female relatives for Christmas. They look like they'd be fun to work on. I've got so many odds 'n ends of small fabric pieces that'll work well with them. I also bought a big batch of insulbrite once, a couple of years ago when it was on sale. Now I'll get to use it up. 8-) |
great idea! never would have thought of that
|
I use insulbrite and cotton batting. Have never thought about the ironing board cover idea. I think it would need to be one with the heat protection. Also use insulbrite for placemats.
|
Thanks to everyone who has responded to this topic. What a wealth of ideas!
|
Where is that potholder swap
Originally Posted by dotcomdtcm
Have you all seen the potholder swap? Now I'm hooked!
|
8-)[/quote]
Sounds like you have a fun and productive day ahead of you. O made them one year for all the female family members. Another year I mad trivets by sewing two pieces of fabric together leaving on end open. I then sewed channels into it and filled the channels with rice leaving just enough head space to top stitch the opening closed. They loved these too.[/quote] This sounds good too. Who wouldn't want to have a pretty and useful trivet. I'll put that on my list. Sounds easy enough. Maybe matching trivets and potholders for the lucky recipients. I love this board! |
Looks like it's potholders for Christmas. What a quick project.
|
Originally Posted by pstoner
Originally Posted by retired2pa
I use Insulbrite from Joann's. It's very cheap and also a layer of cotton batting.
|
Originally Posted by dotcomdtcm
Please tell me what materials you prefer, batting/insulated fabric, and where you buy it. One of my old books says to buy an ironing board cover & cut it up!! Thanks once again.
|
Originally Posted by BellaBoo
I have used heavy duty aluminium foil between cotton batting. Washes fine.
|
Originally Posted by ganny
Originally Posted by BellaBoo
I have used heavy duty aluminium foil between cotton batting. Washes fine.
Do you quilt thru the aluminium foil like regular? |
I did a *duh* last night. I was up until 2:30 this morning sewing, making a sample pot holder (never made one before.) After I got it quilted and the binding put on, I realized I only put one layer of w&n inside it. Really ticked me off as I was really pleased how it turned out. I guess it will make a nice candle mat, or something to put under a warm plate in my lap.
|
All times are GMT -8. The time now is 02:30 PM. |