Metallic thread
 

I want to do some dense straight line quilting on my grandaughters' quilt I have made using metallic thread. Is this okay to use on a childs' quilt, any special advice for machine set up, and do I have to also use it in the bobbin or can I use cotton? Thankd.

I have no personal experience using metallic thread, but here's what I do know. Depending on the thread, it may be scratchy; you do have to use a much lower top thread tension with a metallic thread, or it will break.

Thankyou. Hadn't thought about the thread being scratchy, hmmmmmmm may have to re-think this one.

I use Superior thread metallic with their Sew Fine or Bottom line all the time. I do drop top tension a little but not a whole lot and have excellent results.
On the scratchy issue, there are some non-metallics that look close to metallic gold and would not be scratchy.

It's been awhile but I seem to remember using a metallic needle in the machine. It has a different hole so the thread doesn't fray.

not all metallics or even threads are the same. floriani is great. If you are having issues when sewing you might consider turning the thread spool upside down in a cup at the back of the machine, this helps alot. Also the needle is important, there are needles that really help with this. If you think you need a certain size also get one size bigger so that the hole is a little larger in case you need it. I like Inspira needles because the hole is round and not oblong like most needles. If the metallic is on top it should be good.

I wouldn't use metallic for a baby quilt as there is that whole controversy about synthetic fibers melting. You'll also want to check with the manufacturer's website to make sure that the thread can be dried at least on low heat as children's quilts need to be laundered more frequently than adults. Personally, I have found that at least some metallic threads are more fragile than cotton & will snap more easily so I would want to do a practice piece & put it through the wash a couple times to make sure it will hold up to regular use.

You might look at a shiny trilobal thread like Glide, not metallic but super shiny and soft.

Metallic thread is not the easiest thread to work with and I am not sure how many washing it would take before the thread started to disintegrate. When I quilt with it, it is usually a wall hanging. I use the special Schmetz needles that have a larger eyehole.

Thanks everyone...appreciated