metallic threads when FMQing?
Does anyone use any type of metallic thread when FMQing? I'm working on a Christmas quilt that I think a metallic against the white would make it more snowy and "pop", but aren't metallic threads easily broken? If this is possible, what do I need to know? Needle size? Tension? What brand of thread? Plain thread in the bobbin?
|
I have used it to free motion. There is a metallic needle but the thread still breaks. Use plain thread in the bobbin and each machine is different so you will have to determine if the tension has to be changed. I hope someone else can give you more advise.
|
Use Metallic needles...a must ....go slow....needle gets hot if you go too fast....can be done...but finicky....if you don't get the tension right it will not work....play on scrap....and definitely the Metallic needles help me...
|
Definitely make sure you are using the right needle, and go slower.
I love metallic threads! |
I have a quilting project that I am contemplating using metallic thread to quilt with. I did some online research and wrote down a few tips. 1, use ultra fine thread in the bobbin such a Superior Bottom Line or bobbin thread sized between 100-70. 2, lower the upper tension. 3, Use a 90 metallic needle or a 90 top stitch needle. 4, Stitch slowly. 5. If possible use a thread stand. 6, practice, practice, practice on a test sandwich. Now off to begin my metallic thread adventure, LOL
|
Glide thread has a metallic look without the hassle. Grays look silver. Dijon looks bright gold.
|
I've used Superior metallic in FMQ successfully. And, as mentioned, make sure you go slowly & use a metallic needle.
|
If you're not doing a specific design, try using the metallic thread in the bobbin. I did this on a Christmas runner, and it turned out beautifully.
|
Originally Posted by Caroline S
(Post 6843174)
I have a quilting project that I am contemplating using metallic thread to quilt with. I did some online research and wrote down a few tips. 1, use ultra fine thread in the bobbin such a Superior Bottom Line or bobbin thread sized between 100-70. 2, lower the upper tension. 3, Use a 90 metallic needle or a 90 top stitch needle. 4, Stitch slowly. 5. If possible use a thread stand. 6, practice, practice, practice on a test sandwich. Now off to begin my metallic thread adventure, LOL
|
All times are GMT -8. The time now is 07:51 PM. |