Needle breaks when freemotion quilting
 

When I do meandering/stippling style free motion I have no problem with breaking needles. When I try to do any circular pattern, little circles spirals, etc. my needle breaks. Any suggestions on what I'm doing wrong and how to correct this?

Yes, it's typical when doing circles or spirals for folks to speed their hands up. Try making a conscious effort to slow your hands down but keep your machine speed up when you are doing circles or spirals and see if that helps. Alternatively, you could speed your machine up when you do circles and spirals.

You want to make sure you are not moving your hands faster than the needle is going up and down.

Rob<object type="cosymantecnisbfw" cotype="cs" id="SILOBFWOBJECTID" style="width: 0px; height: 0px; display: block;"></object>

Tartan makes a good point, esp. if you are using a relatively thin needle. I generally use a size 14 Smets topstitch needle when FMQ and even with heavy thread buildup have never had a needle break.

Rob
<object type="cosymantecnisbfw" cotype="cs" id="SILOBFWOBJECTID" style="width: 0px; height: 0px; display: block;"></object>

Thanks. Sounds like you are right. I think I must be moving my hands to fast. I also use a 14 embroidery needle.
Thanks for your help.

I'll give that a try. I don't see a buildup of thread where the needle breaks, but it won't hurt to try a finer thread.
Thanks for your help.

Stronger needle, try a jeans or top stitch and Slow Down!
If you go too fast, you don't give the needle enough time to come completely out of the fabric. You move the fabric and because the needle's still in there, it bends just a tiny bit. Doesn't take much for the deflected needle to hit the throat plate and break. It's harder to bend a stiffer needle and by slowing down, you give the needle enough time to clear the fabric before you move it to the next stitch.

When mine did that, I did not have the bobbin in the right direction.

I attended a class once and the teacher made a great point. There is a rhythm to free motion. Your hands need to move with the sound of the machine. As long as they move at the same rate, your problem will be solved.

I'm convinced that this is the solution...slow down. I use a 14 embroidery needle but will try a stronger needle.
Thanks for the help.